numam-dpdk/drivers/net/mlx5/mlx5_mac.c
Olivier Matz 35b2d13fd6 net: add rte prefix to ether defines
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
2019-05-24 13:34:45 +02:00

233 lines
5.3 KiB
C

/* SPDX-License-Identifier: BSD-3-Clause
* Copyright 2015 6WIND S.A.
* Copyright 2015 Mellanox Technologies, Ltd
*/
#include <stddef.h>
#include <assert.h>
#include <stdint.h>
#include <string.h>
#include <inttypes.h>
#include <errno.h>
#include <netinet/in.h>
#include <sys/ioctl.h>
#include <arpa/inet.h>
/* Verbs header. */
/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
#ifdef PEDANTIC
#pragma GCC diagnostic ignored "-Wpedantic"
#endif
#include <infiniband/verbs.h>
#ifdef PEDANTIC
#pragma GCC diagnostic error "-Wpedantic"
#endif
#include <rte_ether.h>
#include <rte_ethdev_driver.h>
#include <rte_common.h>
#include "mlx5.h"
#include "mlx5_utils.h"
#include "mlx5_rxtx.h"
#include "mlx5_defs.h"
/**
* Get MAC address by querying netdevice.
*
* @param[in] dev
* Pointer to Ethernet device.
* @param[out] mac
* MAC address output buffer.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_get_mac(struct rte_eth_dev *dev, uint8_t (*mac)[RTE_ETHER_ADDR_LEN])
{
struct ifreq request;
int ret;
ret = mlx5_ifreq(dev, SIOCGIFHWADDR, &request);
if (ret)
return ret;
memcpy(mac, request.ifr_hwaddr.sa_data, RTE_ETHER_ADDR_LEN);
return 0;
}
/**
* Remove a MAC address from the internal array.
*
* @param dev
* Pointer to Ethernet device structure.
* @param index
* MAC address index.
*/
static void
mlx5_internal_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
struct mlx5_priv *priv = dev->data->dev_private;
const int vf = priv->config.vf;
assert(index < MLX5_MAX_MAC_ADDRESSES);
if (rte_is_zero_ether_addr(&dev->data->mac_addrs[index]))
return;
if (vf)
mlx5_nl_mac_addr_remove(dev, &dev->data->mac_addrs[index],
index);
memset(&dev->data->mac_addrs[index], 0, sizeof(struct rte_ether_addr));
}
/**
* Adds a MAC address to the internal array.
*
* @param dev
* Pointer to Ethernet device structure.
* @param mac_addr
* MAC address to register.
* @param index
* MAC address index.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
static int
mlx5_internal_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
uint32_t index)
{
struct mlx5_priv *priv = dev->data->dev_private;
const int vf = priv->config.vf;
unsigned int i;
assert(index < MLX5_MAX_MAC_ADDRESSES);
if (rte_is_zero_ether_addr(mac)) {
rte_errno = EINVAL;
return -rte_errno;
}
/* First, make sure this address isn't already configured. */
for (i = 0; (i != MLX5_MAX_MAC_ADDRESSES); ++i) {
/* Skip this index, it's going to be reconfigured. */
if (i == index)
continue;
if (memcmp(&dev->data->mac_addrs[i], mac, sizeof(*mac)))
continue;
/* Address already configured elsewhere, return with error. */
rte_errno = EADDRINUSE;
return -rte_errno;
}
if (vf) {
int ret = mlx5_nl_mac_addr_add(dev, mac, index);
if (ret)
return ret;
}
dev->data->mac_addrs[index] = *mac;
return 0;
}
/**
* DPDK callback to remove a MAC address.
*
* @param dev
* Pointer to Ethernet device structure.
* @param index
* MAC address index.
*/
void
mlx5_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
{
int ret;
if (index >= MLX5_MAX_UC_MAC_ADDRESSES)
return;
mlx5_internal_mac_addr_remove(dev, index);
if (!dev->data->promiscuous) {
ret = mlx5_traffic_restart(dev);
if (ret)
DRV_LOG(ERR, "port %u cannot restart traffic: %s",
dev->data->port_id, strerror(rte_errno));
}
}
/**
* DPDK callback to add a MAC address.
*
* @param dev
* Pointer to Ethernet device structure.
* @param mac_addr
* MAC address to register.
* @param index
* MAC address index.
* @param vmdq
* VMDq pool index to associate address with (ignored).
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_mac_addr_add(struct rte_eth_dev *dev, struct rte_ether_addr *mac,
uint32_t index, uint32_t vmdq __rte_unused)
{
int ret;
if (index >= MLX5_MAX_UC_MAC_ADDRESSES) {
rte_errno = EINVAL;
return -rte_errno;
}
ret = mlx5_internal_mac_addr_add(dev, mac, index);
if (ret < 0)
return ret;
if (!dev->data->promiscuous)
return mlx5_traffic_restart(dev);
return 0;
}
/**
* DPDK callback to set primary MAC address.
*
* @param dev
* Pointer to Ethernet device structure.
* @param mac_addr
* MAC address to register.
*
* @return
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_mac_addr_set(struct rte_eth_dev *dev, struct rte_ether_addr *mac_addr)
{
DRV_LOG(DEBUG, "port %u setting primary MAC address",
dev->data->port_id);
return mlx5_mac_addr_add(dev, mac_addr, 0, 0);
}
/**
* DPDK callback to set multicast addresses list.
*
* @see rte_eth_dev_set_mc_addr_list()
*/
int
mlx5_set_mc_addr_list(struct rte_eth_dev *dev,
struct rte_ether_addr *mc_addr_set, uint32_t nb_mc_addr)
{
uint32_t i;
int ret;
if (nb_mc_addr >= MLX5_MAX_MC_MAC_ADDRESSES) {
rte_errno = ENOSPC;
return -rte_errno;
}
for (i = MLX5_MAX_UC_MAC_ADDRESSES; i != MLX5_MAX_MAC_ADDRESSES; ++i)
mlx5_internal_mac_addr_remove(dev, i);
i = MLX5_MAX_UC_MAC_ADDRESSES;
while (nb_mc_addr--) {
ret = mlx5_internal_mac_addr_add(dev, mc_addr_set++, i++);
if (ret)
return ret;
}
if (!dev->data->promiscuous)
return mlx5_traffic_restart(dev);
return 0;
}