compress/qat: add empty driver

Add Makefiles, meson files, and empty source files for compression PMD.
Handle cases for building either symmetric crypto PMD
or compression PMD or both and the common files both depend on.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>

MAINTAINERS

@@ -861,6 +861,11 @@ Compression Drivers
 M: Pablo de Lara <pablo.de.lara.guarch@intel.com>
 T: git://dpdk.org/next/dpdk-next-crypto
 
+Intel QuickAssist
+M: Fiona Trahe <fiona.trahe@intel.com>
+F: drivers/compress/qat/
+F: drivers/common/qat/
+
 ISA-L
 M: Lee Daly <lee.daly@intel.com>
 F: drivers/compress/isal/

config/common_base

@@ -493,7 +493,8 @@ CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
 #
 # Compile PMD for QuickAssist based devices
 #
-CONFIG_RTE_LIBRTE_PMD_QAT=n
+CONFIG_RTE_LIBRTE_PMD_QAT=y
+CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n
 #
 # Max. number of QuickAssist devices, which can be detected and attached
 #

drivers/common/qat/Makefile

@@ -3,40 +3,55 @@
 
 include $(RTE_SDK)/mk/rte.vars.mk
 
-# library name
-LIB = librte_pmd_qat.a
-
-# library version
-LIBABIVER := 1
-
-# build flags
-CFLAGS += $(WERROR_FLAGS)
-CFLAGS += -O3
-
 # build directories
 QAT_CRYPTO_DIR := $(RTE_SDK)/drivers/crypto/qat
-VPATH=$(QAT_CRYPTO_DIR)
+QAT_COMPRESS_DIR := $(RTE_SDK)/drivers/compress/qat
+VPATH=$(QAT_CRYPTO_DIR):$(QAT_COMPRESS_DIR)
 
 # external library include paths
 CFLAGS += -I$(SRCDIR)/qat_adf
 CFLAGS += -I$(SRCDIR)
 CFLAGS += -I$(QAT_CRYPTO_DIR)
+CFLAGS += -I$(QAT_COMPRESS_DIR)
 
-# library common source files
-SRCS-y += qat_device.c
-SRCS-y += qat_common.c
-SRCS-y += qat_logs.c
-SRCS-y += qat_qp.c
+
+ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y)
+	CFLAGS += -DALLOW_EXPERIMENTAL_API
+	LDLIBS += -lrte_compressdev
+	SRCS-y += qat_comp.c
+	SRCS-y += qat_comp_pmd.c
+	build_qat = yes
+endif
 
 # library symmetric crypto source files
 ifeq ($(CONFIG_RTE_LIBRTE_CRYPTODEV),y)
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_QAT_SYM),y)
 	LDLIBS += -lrte_cryptodev
 	LDLIBS += -lcrypto
 	CFLAGS += -DBUILD_QAT_SYM
 	SRCS-y += qat_sym.c
 	SRCS-y += qat_sym_session.c
 	SRCS-y += qat_sym_pmd.c
+	build_qat = yes
 endif
+endif
+
+ifdef build_qat
+
+	# library name
+	LIB = librte_pmd_qat.a
+
+	# library version
+	LIBABIVER := 1
+	# build flags
+	CFLAGS += $(WERROR_FLAGS)
+	CFLAGS += -O3
+
+	# library common source files
+	SRCS-y += qat_device.c
+	SRCS-y += qat_common.c
+	SRCS-y += qat_logs.c
+	SRCS-y += qat_qp.c
 
 	LDLIBS += -lrte_eal -lrte_mbuf -lrte_mempool
 	LDLIBS += -lrte_pci -lrte_bus_pci
@@ -45,6 +60,7 @@ LDLIBS += -lrte_pci -lrte_bus_pci
 	SYMLINK-y-include +=
 
 	# versioning export map
-EXPORT_MAP := ../../crypto/qat/rte_pmd_qat_version.map
+	EXPORT_MAP := ../../compress/qat/rte_pmd_qat_version.map
+endif
 
 include $(RTE_SDK)/mk/rte.lib.mk

drivers/compress/meson.build

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2018 Intel Corporation
 
-drivers = ['isal']
+drivers = ['isal', 'qat']
 
 std_deps = ['compressdev'] # compressdev pulls in all other needed deps
 config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'

drivers/compress/qat/meson.build

@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2017-2018 Intel Corporation
+
+
+# Add our sources files to the list
+allow_experimental_apis = true
+qat_sources += files('qat_comp_pmd.c',
+		     'qat_comp.c')
+qat_includes += include_directories('.')
+qat_deps += 'compressdev'
+qat_ext_deps += dep
+
+# build the whole driver
+sources += qat_sources
+cflags += qat_cflags
+deps += qat_deps
+ext_deps += qat_ext_deps
+includes += qat_includes

drivers/compress/qat/qat_comp.c

@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2018 Intel Corporation
+ */
+
+#include "qat_comp.h"

drivers/compress/qat/qat_comp.h

@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2018 Intel Corporation
+ */
+
+#ifndef _QAT_COMP_H_
+#define _QAT_COMP_H_
+
+#ifdef RTE_LIBRTE_COMPRESSDEV
+
+#include <rte_compressdev.h>
+#include <rte_compressdev_pmd.h>
+
+#endif
+#endif

drivers/compress/qat/qat_comp_pmd.c

@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2018 Intel Corporation
+ */
+
+#include "qat_comp_pmd.h"

drivers/compress/qat/qat_comp_pmd.h

@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2018 Intel Corporation
+ */
+
+#ifndef _QAT_COMP_PMD_H_
+#define _QAT_COMP_PMD_H_
+
+#ifdef RTE_LIBRTE_COMPRESSDEV
+
+#include <rte_compressdev.h>
+#include <rte_compressdev_pmd.h>
+
+#endif
+#endif /* _QAT_COMP_PMD_H_ */

drivers/compress/qat/rte_pmd_qat_version.map

@@ -0,0 +1,3 @@
+DPDK_18.08 {
+	local: *;
+};

drivers/crypto/qat/meson.build

@@ -1,24 +1,18 @@
 # SPDX-License-Identifier: BSD-3-Clause
 # Copyright(c) 2017-2018 Intel Corporation
 
+# this does not build the QAT driver, instead that is done in the compression
+# driver which comes later. Here we just add our sources files to the list
 build = false
 dep = dependency('libcrypto', required: false)
+qat_includes += include_directories('.')
+qat_deps += 'cryptodev'
 if dep.found()
 	# Add our sources files to the list
 	qat_sources += files('qat_sym_pmd.c',
 			     'qat_sym.c',
 			     'qat_sym_session.c')
-	qat_includes += include_directories('.')
-	qat_deps += 'cryptodev'
 	qat_ext_deps += dep
 	pkgconfig_extra_libs += '-lcrypto'
 	qat_cflags += '-DBUILD_QAT_SYM'
-
-	# build the whole driver
-	sources += qat_sources
-	cflags += qat_cflags
-	deps += qat_deps
-	ext_deps += qat_ext_deps
-	includes += qat_includes
-	build = true
 endif

drivers/crypto/qat/rte_pmd_qat_version.map

@@ -1,3 +0,0 @@
-DPDK_2.2 {
-	local: *;
-};

mk/rte.app.mk

@@ -199,7 +199,9 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_AESNI_GCM)   += -lIPSec_MB
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CCP)         += -lrte_pmd_ccp -lcrypto
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_OPENSSL)     += -lrte_pmd_openssl -lcrypto
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_NULL_CRYPTO) += -lrte_pmd_null_crypto
-_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT)         += -lrte_pmd_qat -lcrypto
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_QAT),y)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT_SYM)     += -lrte_pmd_qat -lcrypto
+endif # CONFIG_RTE_LIBRTE_PMD_QAT
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)      += -lrte_pmd_snow3g
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_SNOW3G)      += -L$(LIBSSO_SNOW3G_PATH)/build -lsso_snow3g
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KASUMI)      += -lrte_pmd_kasumi
@@ -222,6 +224,10 @@ endif # CONFIG_RTE_LIBRTE_CRYPTODEV
 ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y)
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ISAL) += -lrte_pmd_isal_comp
 _LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_ISAL) += -lisal
+# Link QAT driver if it has not been linked yet
+ifeq ($(CONFIG_RTE_LIBRTE_PMD_QAT_SYM),n)
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_QAT)  += -lrte_pmd_qat
+endif # CONFIG_RTE_LIBRTE_PMD_QAT_SYM
 endif # CONFIG_RTE_LIBRTE_COMPRESSDEV
 
 ifeq ($(CONFIG_RTE_LIBRTE_EVENTDEV),y)

test/test/test_cryptodev.c

@@ -9938,9 +9938,9 @@ test_cryptodev_qat(void /*argv __rte_unused, int argc __rte_unused*/)
 			RTE_STR(CRYPTODEV_NAME_QAT_SYM_PMD));
 
 	if (gbl_driver_id == -1) {
-		RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check if "
-				"CONFIG_RTE_LIBRTE_PMD_QAT is enabled "
-				"in config file to run this testsuite.\n");
+		RTE_LOG(ERR, USER1, "QAT PMD must be loaded. Check that both "
+		"CONFIG_RTE_LIBRTE_PMD_QAT and CONFIG_RTE_LIBRTE_PMD_QAT_SYM "
+		"are enabled in config file to run this testsuite.\n");
 		return TEST_SKIPPED;
 	}