If there are multiple threads contending, they all attempt to take the
spinlock lock at the same time once it is released. This results in a
huge amount of processor bus traffic, which is a huge performance
killer. Thus, if we somehow order the lock-takers so that they know who
is next in line for the resource we can vastly reduce the amount of bus
traffic.
This patch added MCS lock library. It provides scalability by spinning
on a CPU/thread local variable which avoids expensive cache bouncings.
It provides fairness by maintaining a list of acquirers and passing the
lock to each CPU/thread in the order they acquired the lock.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The rte_stack library provides an API for configuration and use of a
bounded stack of pointers. Push and pop operations are MT-safe, allowing
concurrent access, and the interface supports pushing and popping multiple
pointers at a time.
The library's interface is modeled after another DPDK data structure,
rte_ring, and its lock-based implementation is derived from the stack
mempool handler. An upcoming commit will migrate the stack mempool handler
to rte_stack.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The spinlock implementation is unfair, some threads may take locks
aggressively while leaving the other threads starving for long time.
This patch introduces ticketlock which gives each waiting thread a
ticket and they can take the lock one by one. First come, first serviced.
This avoids starvation for too long time and is more predictable.
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch enables the population of timestamp field
in mbuf on packet receive.
It may give performance impact on LX2xxx platforms.
So, it has been made optional for Lx2xxx platform.
One shall call, rte_dpaa2_enable_ts() to enable it.
Nothing is required for LS2 and LS1088 platforms.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This patch adds the infrastructure and initial code for the telemetry
library.
The telemetry init is registered with eal_init(). We can then check to see
if --telemetry was passed as an eal option. If --telemetry was parsed, then
we call telemetry init at the end of eal init.
Control threads are used to get CPU cycles for telemetry, which are
configured in this patch also.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
As APIs in rte_vdpa.h are public, we need to add doxygen comments
to all APIs and structures.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The ethernet Tx adapter abstracts the transmit stage of an
event driven packet processing application. The transmit
stage may be implemented with eventdev PMD support or use a
rte_service function implemented in the adapter. These APIs
provide a common configuration and control interface and
an transmit API for the eventdev PMD implementation.
The transmit port is specified using mbuf::port. The transmit
queue is specified using the rte_event_eth_tx_adapter_txq_set()
function.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
librte_bpf provides a framework to load and execute eBPF bytecode
inside user-space dpdk based applications.
It supports basic set of features from eBPF spec
(https://www.kernel.org/doc/Documentation/networking/filter.txt).
Not currently supported features:
- JIT
- cBPF
- tail-pointer call
- eBPF MAP
- skb
- function calls for 32-bit apps
- mbuf pointer as input parameter for 32-bit apps
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added structures and enums specific to compression,
including the compression operation structure and the
different supported algorithms, checksums and compression
levels.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
This patch introduces event crypto adapter APIs. It
also provides information on working model/adapter
modes & their usage. Application is expected to use
this interface to transfer packets between the crypto
device & the event device.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
There are two API's which are required by NXP specific Command Interface
Application (AIOP CMDIF). This patch exposes these two API's.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Event devices can be coupled with various components to provide
new event sources by using event adapters. The event timer adapter
is one such adapter; it bridges event devices and timer mechanisms.
This library extends the event-driven programming model by
introducing a new type of event that represents a timer expiration,
and it provides APIs with which adapters can be created or destroyed
and event timers can be armed and canceled.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This API provides a common set of actions for pipeline input ports to speed
up application development.
Each pipeline input port can be assigned an action handler to be executed
on every input packet during the pipeline execution.
The pipeline library allows the user to define his own input port actions
by providing customized input port action handler. While the user can
still follow this process, this API is intended to provide a quicker
development alternative for a set of predefined actions.
The typical steps to use this API are:
* Define an input port action profile.
* Instantiate the input port action profile to create input port action
objects.
* Use the input port action to generate the input port action handler
invoked by the pipeline.
* Use the input port action object to generate the internal data structures
used by the input port action handler based on given action parameters.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This API provides a common set of actions for pipeline tables to speed up
application development.
Each match-action rule added to a pipeline table has associated data
that stores the action context. This data is input to the table
action handler called for every input packet that hits the rule as
part of the table lookup during the pipeline execution.
The pipeline library allows the user to define his own table
actions by providing customized table action handlers (table
lookup) and complete freedom of setting the rules and their data
(table rule add/delete). While the user can still follow this
process, this API is intended to provide a quicker development
alternative for a set of predefined actions.
The typical steps to use this API are:
* Define a table action profile.
* Instantiate the table action profile to create table action objects.
* Use the table action object to generate the pipeline table action
handlers (invoked by the pipeline table lookup operation).
* Use the table action object to generate the rule data (for the
pipeline table rule add operation) based on given action parameters.
* Use the table action object to read action data (e.g. stats counters)
for any given rule.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch add support for various mempool ops config helper APIs.
1.User defined mempool ops
2.Platform detected HW mempool ops (active).
3.Best selection of mempool ops by looking into user defined,
platform registered and compile time configured.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
- wireless baseband device (bbdev) library files
- bbdev is tagged as EXPERIMENTAL
- Makefiles and configuration macros definition
- bbdev library is enabled by default
- release notes of the initial version
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ESP header is required for IPsec crypto actions.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Fixes: c711ccb309 ("ivshmem: remove library and its EAL integration")
Fixes: e8009a077d ("doc: group classification libraries in doxygen index")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
The following APIs's are implemented in the
librte_flow_classify library:
rte_flow_classifier_create
rte_flow_classifier_free
rte_flow_classifier_query
rte_flow_classify_table_create
rte_flow_classify_table_entry_add
rte_flow_classify_table_entry_delete
The following librte_table API's are used:
f_create to create a table.
f_add to add a rule to the table.
f_del to delete a rule from the table.
f_free to free a table
f_lookup to match packets with the rules.
The library supports counting of IPv4 five tupple packets only,
ie IPv4 UDP, TCP and SCTP packets.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
The libraries reorder, distributor, EFD, ACL and member seem
to belong to the same category.
The previous categories "layers" and "containers" do not fit well.
It is proposed to group them under "classification" category.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch introduces new ethdev generic API for Traffic Metering and
Policing (MTR), which is yet another standard RX offload for Ethernet
devices.
Similar to rte_flow and rte_tm APIs, the configuration of MTR objects is
done in their own namespace (rte_mtr) within the librte_ether library.
Main features:
1. Traffic metering: determine the color for the current packet (green,
yellow, red) based on history maintained by the MTR object. Supported
algorithms: srTCM (RFC 2697), trTCM (RFC 2698 and RFC 4115).
2. Policing (per meter output color actions): re-color the packet (keep
or change the meter output color) or drop the packet.
3. Statistics
4. Capability API
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Generic Segmentation Offload (GSO) is a SW technique to split large
packets into small ones. Akin to TSO, GSO enables applications to
operate on large packets, thus reducing per-packet processing overhead.
To enable more flexibility to applications, DPDK GSO is implemented
as a standalone library. Applications explicitly use the GSO library
to segment packets. To segment a packet requires two steps. The first
is to set proper flags to mbuf->ol_flags, where the flags are the same
as that of TSO. The second is to call the segmentation API,
rte_gso_segment(). This patch introduces the GSO API framework to DPDK.
rte_gso_segment() splits an input packet into small ones in each
invocation. The GSO library refers to these small packets generated
by rte_gso_segment() as GSO segments. Each of the newly-created GSO
segments is organized as a two-segment MBUF, where the first segment is a
standard MBUF, which stores a copy of packet header, and the second is an
indirect MBUF which points to a section of data in the input packet.
rte_gso_segment() reduces the refcnt of the input packet by 1. Therefore,
when all GSO segments are freed, the input packet is freed automatically.
Additionally, since each GSO segment has multiple MBUFs (i.e. 2 MBUFs),
the driver of the interface which the GSO segments are sent to should
support to transmit multi-segment packets.
The GSO framework clears the PKT_TX_TCP_SEG flag for both the input
packet, and all produced GSO segments in the event of success, since
segmentation in hardware is no longer required at that point.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add common APIs for configuring packet transfer from ethernet Rx
queues to event devices across HW & SW packet transfer mechanisms.
A detailed description of the adapter is contained in the header's
comments.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds the documentation for membership library.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The metrics headers were listed in misc section,
whereas they belong to the device API family.
Fixes: 349950ddb9 ("metrics: add information metrics library")
Fixes: 2ad7ba9a65 ("bitrate: add bitrate statistics library")
Fixes: 5cd3cac9ed ("latency: added new library for latency stats")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
The keepalive header was listed in misc section,
despite its doxygen comment is "LCore Keepalive Monitor".
Fixes: 75583b0d1e ("eal: add keep alive monitoring")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add header files, update .map files with new service
functions, and add the service header to the doxygen
for building.
This service header API allows DPDK to use services as
a concept of something that requires CPU cycles. An example
is a PMD that runs in software to schedule events, where a
hardware version exists that does not require a CPU.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Generic Receive Offload (GRO) is a widely used SW-based offloading
technique to reduce per-packet processing overhead. It gains
performance by reassembling small packets into large ones. This
patchset is to support GRO in DPDK. To support GRO, this patch
implements a GRO API framework.
To enable more flexibility to applications, DPDK GRO is implemented as
a user library. Applications explicitly use the GRO library to merge
small packets into large ones. DPDK GRO provides two reassembly modes.
One is called lightweight mode, the other is called heavyweight mode.
If applications want to merge packets in a simple way and the number
of packets is relatively small, they can use the lightweight mode.
If applications need more fine-grained controls, they can choose the
heavyweight mode.
rte_gro_reassemble_burst is the main reassembly API which is used in
lightweight mode and processes N packets at a time. For applications,
performing GRO in lightweight mode is simple. They just need to invoke
rte_gro_reassemble_burst. Applications can get GROed packets as soon as
rte_gro_reassemble_burst returns.
rte_gro_reassemble is the main reassembly API which is used in
heavyweight mode and tries to merge N inputted packets with the packets
in GRO reassembly tables. For applications, performing GRO in heavyweight
mode is relatively complicated. Before performing GRO, applications need
to create a GRO context object, which keeps reassembly tables of
desired GRO types, by rte_gro_ctx_create. Then applications can use
rte_gro_reassemble to merge packets. The GROed packets are in the
reassembly tables of the GRO context object. If applications want to get
them, applications need to manually flush them by flush API.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Each architecture may have different instructions for optimized
and power consumption aware rte_pause() implementation.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds the missing doxygen comments and updated
inline comments to cryptodev scheduler
Fixes: d58a3f3125 ("crypto/scheduler: add documentation")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.
Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.
Signed-off-by: Remy Horton <remy.horton@intel.com>
In a polling model, lcores poll ethdev ports and associated
rx queues directly to look for packet. In an event driven model,
by contrast, lcores call the scheduler that selects packets for
them based on programmer-specified criteria. Eventdev library
adds support for event driven programming model, which offer
applications automatic multicore scaling, dynamic load balancing,
pipelining, packet ingress order maintenance and
synchronization services to simplify application packet processing.
By introducing event driven programming model, DPDK can support
both polling and event driven programming models for packet processing,
and applications are free to choose whatever model
(or combination of the two) that best suits their needs.
This patch adds the eventdev specification header file.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Rename "rte_virtio_net.h" to "rte_vhost.h", to not let it be virtio
net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Elastic Flow Distributor (EFD) is a distributor library that uses
perfect hashing to determine a target/value for a given incoming flow key.
It has the following advantages:
- First, because it uses perfect hashing, it does not store
the key itself and hence lookup performance is not dependent
on the key size.
- Second, the target/value can be any arbitrary value hence
the system designer and/or operator can better optimize service rates
and inter-cluster network traffic locating.
- Third, since the storage requirement is much smaller than a hash-based
flow table (i.e. better fit for CPU cache), EFD can scale to
millions of flow keys.
Finally, with current optimized library implementation performance
is fully scalable with number of CPU cores.
Signed-off-by: Byron Marohn <byron.marohn@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
This commit introduces 8-bit, 16-bit, 32bit, 64bit I/O device
memory read/write operations along with the relaxed versions.
The weakly-ordered machine like ARM needs additional I/O barrier for
device memory read/write access over PCI bus.
By introducing the eal abstraction for I/O device memory read/write access,
The drivers can access I/O device memory in architecture agnostic manner.
The relaxed version does not have additional I/O memory barrier, useful in
accessing the device registers of integrated controllers which
implicitly strongly ordered with respect to memory access.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add common vector type definitions to all CPU architectures.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
This new API supersedes all the legacy filter types described in
rte_eth_ctrl.h. It is slightly higher level and as a result relies more on
PMDs to process and validate flow rules.
Benefits:
- A unified API is easier to program for, applications do not have to be
written for a specific filter type which may or may not be supported by
the underlying device.
- The behavior of a flow rule is the same regardless of the underlying
device, applications do not need to be aware of hardware quirks.
- Extensible by design, API/ABI breakage should rarely occur if at all.
- Documentation is self-standing, no need to look up elsewhere.
Existing filter types will be deprecated and removed in the near future.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
There was an option CONFIG_RTE_INSECURE_FUNCTION_WARNING (disabled by
default), which prevents from using some libc functions:
sprintf, snprintf, vsnprintf, strcpy, strncpy, strcat, strncat, sscanf,
strtok, strsep and strlen.
It's all about using them at the right place with the right precautions.
However, it is neither really possible nor a good advice to disable them.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This file is going to disappear, remove the doxygen parts that reference
various drivers and remove it from the doxygen index.
Signed-off-by: David Marchand <david.marchand@6wind.com>
add KNI port type to the packet framework
Signed-off-by: WeiJie Zhuang <zhuangwj@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
As cryptodev library does not depend on mbuf_offload library
any longer, this patch removes it.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This library add support for adding a chain of offload operations to a
mbuf. It contains the definition of the rte_mbuf_offload structure as
well as helper functions for attaching offloads to mbufs and a mempool
management functions.
This initial implementation supports attaching multiple offload
operations to a single mbuf, but only a single offload operation of a
specific type can be attach to that mbuf.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch contains the initial proposed APIs and device framework for
integrating crypto packet processing into DPDK.
features include:
- Crypto device configuration / management APIs
- Definitions of supported cipher algorithms and operations.
- Definitions of supported hash/authentication algorithms and
operations.
- Crypto session management APIs
- Crypto operation data structures and APIs allocation of crypto
operation structure used to specify the crypto operations to
be performed on a particular mbuf.
- Extension of mbuf to contain crypto operation data pointer and
extra flags.
- Burst enqueue / dequeue APIs for processing of crypto operations.
Signed-off-by: Des O Dea <des.j.o.dea@intel.com>
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Adds functions for detecting and reporting the live-ness of LCores,
the primary requirement of which is minimal overheads for the
core(s) being checked. Core failures are notified via an application
defined callback.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Some libraries were not included in doxygen documentation.
Other ones were included but not listed in the index.
The malloc library is now included in EAL.
The libraries compat and jobstats are added but not doxygen compliant.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
