The command "meson build" causes a deprecation warning with meson 0.64.0.
WARNING: Running the setup command as `meson [options]` instead of
`meson setup [options]` is ambiguous and deprecated.
Therefore fix the examples in the documentation.
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stanislaw Kardach <kda@semihalf.com>
In this patch,
* It is possible to switch the running mode of the distributor
using the command line argument.
* With "-c" parameter, you can run RX and Distributor
on the same core.
* Without "-c" parameter, you can run RX and Distributor
on the different core.
* Consecutive termination of the lcores fixed.
The termination order was wrong, and you couldn't terminate the
application while traffic was capturing. The current order is
RX -> Distributor -> TX -> Workers
* When "-c" parameter is active, the wasted distributor core is
also deactivated in the main function.
Signed-off-by: Abdullah Ömer Yamaç <omer.yamac@ceng.metu.edu.tr>
This add the support of hardware reassembly per SA basis.
In SA rule, new parameter reassembly_en is added to enable
HW reassembly per SA.
For example:
sa in <idx> aead_algo <algo> aead_key <key> mode ipv4-tunnel src <ip>
dst <ip> type inline-protocol-offload port_id <id> reassembly_en
Stats counter frag_dropped will represent the number of fragment
drop in case of reassembly failures.
Signed-off-by: Rahul Bhansali <rbhansali@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch adds support in fips_validation app to validate ECDSA.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Brian Dooley <brian.dooley@intel.com>
Add support for asymmetric crypto validation starting with RSA.
For the generation of crypto values which is multiprecision in
math, openssl library is used only for this purpose.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Brian Dooley <brian.dooley@intel.com>
Added functionality to parse algorithm for AES CTR test
Signed-off-by: Brian Dooley <brian.dooley@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Acked-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Added functionality to parse algorithm for AES GMAC test.
Signed-off-by: Brian Dooley <brian.dooley@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Acked-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Added vector support for event crypto adapter in lookaside mode.
Once --event-vector is enabled, event crypto adapter will group
processed crypto operation into rte_event_vector event with type
RTE_EVENT_TYPE_CRYPTODEV_VECTOR.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added base support for lookaside event mode.
Events that are coming from ethdev will be enqueued
to the event crypto adapter, processed and
enqueued back to ethdev for the transmission.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
When the dpdk-ioat app was renamed to dpdk-dma this example command
was missed, this patch corrects that issue.
Fixes: bb4141dbe5 ("examples/dma: rename ioat application example")
Signed-off-by: Conor Walsh <conor.walsh@intel.com>
Add option for setting uncore frequency min/max/index, through uncore API.
This will be set for each package and die on the SKU.
On exit, uncore min and max frequency will be reverted back
to previous frequencies.
Signed-off-by: Tadhg Kearney <tadhg.kearney@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Added function to parse algorithm for TDES CBC and ECB tests in JSON.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Brian Dooley <brian.dooley@intel.com>
RTE_TEST_[RT]X_DESC_DEFAULT and RTE_TEST_[RT]X_DESC_MAX macros have been
copied in a lot of app/ and examples/ code.
Those macros are local to each program.
They are not related to a DPDK public header/API, drop the RTE_TEST_
prefix.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@amd.com>
As part of the agreed process for deprecating KNI in DPDK, the example
app is scheduled for removal as part of the 22.11 release.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Vhost sample app documentation describes parameters that are not in the
code and omits parameters that exist.
Also switching the order of sections on running vhost and VM,
since the --client parameter in the sample line
requires a socket to be created by VM.
Removing uio references and updating with vfio-pci.
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Meson build system creates a vhost binary but Makefile
and docs reference same as vhost-switch. Updating makefile
to match meson and the docs accordingly.
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Doc was updated with fixed grammar in most cases. These
include adding periods to ends of sentences and capitalizing
some words. Some instances of "a" were changed to "an". The
option "-n 4" has also been removed from the example of
running the application.
Fixes: ba7b86b141 ("doc: add l2fwd-crypto sample app guide")
Fixes: 2661f4fbe9 ("examples/l2fwd-crypto: add AEAD parameters")
Fixes: 4790f99d2d ("examples/l2fwd-crypto: use cryptodev algorithm parser")
Fixes: 5949e30dae ("doc: fix typo in l2fwd-crypto usage")
Fixes: acf8616901 ("cryptodev: add auth IV")
Fixes: b79e4c00af ("cryptodev: use AES-GCM/CCM as AEAD algorithms")
Fixes: d2797f51cc ("examples/l2fwd-crypto: add cryptodev mask option")
Fixes: e2a94f9ad3 ("doc: remove references to make from apps guide")
Fixes: 10b9d471a6 ("doc: update minimum requirement of l2fwd-crypto")
Fixes: 3cc28001a3 ("doc: fix typo in l2fwd-crypto guide")
Cc: stable@dpdk.org
Signed-off-by: Jakub Poczatek <jakub.poczatek@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added function to parse algorithm for SHA test.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Added function to parse algorithm for AES XTS test.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Added support to create flow rules with count, mark and
security actions and mark pattern.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added option to configure number of queue pair descriptors via command
line (--desc-nb NUMBER_OF_DESC).
When the crypto processing takes longer durations, small queue pair size
would result in cryptodev enqueue failures. Larger queue pair size would
allow more packets to stay in flight simultaneously and reduce enqueue
failures.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
l3fwd-acl contains duplicate functions to l3fwd.
For this reason we merge l3fwd-acl code into l3fwd
with '--lookup acl' cmdline option to run ACL.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds the use case for async dequeue API. Vswitch can
leverage DMA device to accelerate vhost async dequeue path.
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Tested-by: Yvonne Yang <yvonnex.yang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add CLI options to l3fwd_power to utilize the new power APIs introduced in
this patchset. These CLI options allow the user to configure the
heuritstics made available through the new API via the l3fwd_power
application options.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
ipsec-secgw application is updated to support
DES-CBC ciphering and XCBC-MAC authentication
based IPsec functionality.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add notes on list of algorithms supported for ACVP FIPS validation.
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Jakub Poczatek <jakub.poczatek@intel.com>
Add support to define ipv4 and ipv6 forwarding tables
from reading from a config file for EM with a format
similar to l3fwd-acl one.
Users can now use the default hardcoded route tables
or optionally config files for 'l3fwd_em'. Default
config files have been provided for use with EM.
Related l3fwd docs have been updated to reflect these
changes.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added missing step for converting SHA request files to correct
format. Replaced AES_GCM with GCM to follow the correct
naming format.
Fixes: 3d0fad56b7 ("examples/fips_validation: add crypto FIPS application")
Cc: stable@dpdk.org
Signed-off-by: Jakub Poczatek <jakub.poczatek@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Add support to enable per port packet pool and also override
vector pool size from command line args. This is useful
on some HW to tune performance based on usecase.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Grinder configuration is now moved to sched library.
Number of grinders can also modified by specifying
RTE_SCHED_PORT_N_GRINDERS=N in CFLAGS, where N is number of grinders.
Signed-off-by: Megha Ajmera <megha.ajmera@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When using PMD Power Management, scale mode reacts slower than
monitor mode and pause mode. Add note in user guide to this
effect.
Signed-off-by: David Hunt <david.hunt@intel.com>
The doc's contain references to pmd but the proper use is to use PMD.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Removing the use of driver following PMD as its unnecessary.
Cc: stable@dpdk.org
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Conor Fogarty <conor.fogarty@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some duplicate words were detected with a script.
Fixes: fdec9301f5 ("doc: add flow classify guides")
Fixes: 4dc6d8e63c ("doc: add graph library guide")
Fixes: 30d3aa861d ("doc: rework VM power manager user guide")
Fixes: 0d547ed037 ("examples/ipsec-secgw: support configuration file")
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
The 'IPv4' in the comment is to mark the code snippet, while it made
some confusion. Then removing 'IPv4' description will be clearer.
Fixes: 9a212dc06c ("doc: use code snippets in sample app guides")
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Adds event vector support to inline protocol offload mode.
By default vector support is disabled, it can be enabled by
using the option --event-vector.
Additional options to configure vector size and vector timeout are
also implemented and can be used by specifying --vector-size and
--vector-tmo.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
New option added to the SA configuration arguments that
allows setting an arbitrary start value for ESN.
For example in the SA below ESN will be enabled and first egress
IPsec packet will have the ESN value 10000:
sa out 15 cipher_algo null auth_algo null mode ipv4-tunnel \
src 172.16.1.5 dst 172.16.2.5 \
esn 10000
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add telemetry support to the IPsec GW sample app and add
support for per SA telemetry when using IPsec library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Enable UDP encapsulation for both transport and tunnel modes for the
inline crypto offload path.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support to allow user to specific MSS for TCP TSO offload on a per SA
basis. MSS configuration in the context of IPsec is only supported for
outbound SA's in the context of an inline IPsec Crypto offload.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Since the APIs have been updated from rawdev to dmadev, the application
should also be renamed to match. This patch also includes the documentation
updates for the renaming.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add a command line option to control the interval between stats prints.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
Add command line option for setting the max frame size.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Conor Walsh <conor.walsh@intel.com>
