In flow syntax documentation, there is example for create pattern
template.
Before the example, miss a blank line causing it to look regular bold
text.
In addition, inside the example, it uses tab instead of spaces which
expand the indentation in one line.
This patch adds the blank line and replaces tab with spaces.
Fixes: 04cc665fab ("app/testpmd: add flow template management")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
In testpmd documentation, for listing aged-out flow rules there is some
boxes of examples.
In Sphinx syntax, those boxes are achieved by "::" before. However,
in two places it uses ":" instead and the example looks like a regular
text.
This patch replace the ":" with "::" to get code box.
Fixes: 0e459ffa08 ("app/testpmd: support flow aging")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
In testpmd documentation, there are two underlines which do not
match the length of the text above.
This patch update them to be align with the guideline [1].
[1]
https://doc.dpdk.org/guides/contributing/documentation.html#section-headers
Fixes: a69c335d56 ("doc: add flow dump command in testpmd guide")
Fixes: 0e459ffa08 ("app/testpmd: support flow aging")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
When application use queue-based flow rule management and operate the
same flow rule on the same queue, e.g create/destroy/query, API of
querying aged flow rules should also have queue id parameter just like
other queue-based flow APIs.
By this way, PMD can work in more optimized way since resources are
isolated by queue and needn't synchronize.
If application do use queue-based flow management but configure port
without RTE_FLOW_PORT_FLAG_STRICT_QUEUE, which means application operate
a given flow rule on different queues, the queue id parameter will
be ignored.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The data-path focused flow rule management can manage flow rules in more
optimized way than traditional one by using hints provided by
application in initialization phase.
In addition to the current hints we have in port attr, more hints could
be provided by application about its behaviour.
One example is how the application do with the same flow rule ?
A. create/destroy flow on same queue but query flow on different queue
or queue-less way (i.e, counter query)
B. All flow operations will be exactly on the same queue, by which PMD
could be in more optimized way then A because resource could be
isolated and access based on queue, without lock, for example.
This patch add flag about above situation and could be extended to cover
more situations.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The jumbo offload was removed from patch [1], but testpmd still exist
jumbo offload related code, this patch removes it, and also updates
the rst file.
[1] ethdev: remove jumbo offload flag
Fixes: b563c14212 ("ethdev: remove jumbo offload flag")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As stop action has been forbidden in secondary process, so
the reset action should also not be allowed.
Fixes: a550baf24a ("app/testpmd: support multi-process")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Some PMDs (e.g. hns3) could detect hardware or firmware errors, one
error recovery mode is to report RTE_ETH_EVENT_INTR_RESET event, and
wait for application invoke rte_eth_dev_reset() to recover the port,
however, this mode has the following weaknesses:
1) Due to different hardware and software design, some NIC port recovery
process requires multiple handshakes with the firmware and PF (when the
port is VF). It takes a long time to complete the entire operation for
one port, If multiple ports (for example, multiple VFs of a PF) are
reset at the same time, other VFs may fail to be reset. (Because the
reset processing is serial, the previous VFs must be processed before
the subsequent VFs).
2) The impact on the application layer is great, and it should stop
working queues, stop calling Rx and Tx functions, and then call
rte_eth_dev_reset(), and re-setup all again.
This patch introduces proactive error handling mode, the PMD will try
to recover from the errors itself. In this process, the PMD sets the
data path pointers to dummy functions (which will prevent the crash),
and also make sure the control path operations failed with retcode
-EBUSY.
Because the PMD recovers automatically, the application can only sense
that the data flow is disconnected for a while and the control API
returns an error in this period.
In order to sense the error happening/recovering, three events were
introduced:
1) RTE_ETH_EVENT_ERR_RECOVERING: used to notify the application that it
detected an error and the recovery is being started. Upon receiving the
event, the application should not invoke any control path APIs until
receiving RTE_ETH_EVENT_RECOVERY_SUCCESS or
RTE_ETH_EVENT_RECOVERY_FAILED event.
2) RTE_ETH_EVENT_RECOVERY_SUCCESS: used to notify the application that
it recovers successful from the error, the PMD already re-configures the
port, and the effect is the same as that of the restart operation.
3) RTE_ETH_EVENT_RECOVERY_FAILED: used to notify the application that it
recovers failed from the error, the port should not usable anymore. The
application should close the port.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add command line parameter:
--rxhdrs=eth[,ipv4]
Set the protocol_hdr of segments to scatter packets on receiving if
split feature is engaged. And the queues with BUFFER_SPLIT flag.
Add interactive mode command:
testpmd>set rxhdrs eth,ipv4,ipv4-udp
(protocol sequence should be valid)
The protocol split feature is off by default. To enable protocol split,
you need:
1. Start testpmd with multiple mempools. E.g. --mbuf-size=2048,2048
2. Configure Rx queue with rx_offload buffer split on.
3. Set the protocol type of buffer split. E.g. set rxhdrs eth,eth-ipv4
(default protocols of testpmd : eth|ipv4|ipv6|ipv4-tcp|ipv6-tcp|
ipv4-udp|ipv6-udp|ipv4-sctp|ipv6-sctp|grenat|inner-eth|
inner-ipv4|inner-ipv6|inner-ipv4-tcp|inner-ipv6-tcp|
inner-ipv4-udp|inner-ipv6-udp|inner-ipv4-sctp|inner-ipv6-sctp)
Above protocols can be configured in testpmd. But the configuration can
only be applied when it is supported by specific pmd.
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
This patch extends hairpin-mode command line option of test-pmd
application with an ability to configure whether Rx/Tx hairpin queue
should use locked device memory or RTE memory.
For purposes of this configurations the following bits of 32 bit
hairpin-mode are reserved:
- Bit 8 - If set, then force_memory flag will be set for hairpin RX
queue.
- Bit 9 - If set, then force_memory flag will be set for hairpin TX
queue.
- Bits 12-15 - Memory options for hairpin Rx queue:
- Bit 12 - If set, then use_locked_device_memory will be set.
- Bit 13 - If set, then use_rte_memory will be set.
- Bit 14 - Reserved for future use.
- Bit 15 - Reserved for future use.
- Bits 16-19 - Memory options for hairpin Tx queue:
- Bit 16 - If set, then use_locked_device_memory will be set.
- Bit 17 - If set, then use_rte_memory will be set.
- Bit 18 - Reserved for future use.
- Bit 19 - Reserved for future use.
Signed-off-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.
User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
In some cases application may receive a packet that should have been
received by the kernel. In this case application uses KNI or other means
to transfer the packet to the kernel.
With bifurcated driver we can have a rule to route packets matching
a pattern (example: IPv4 packets) to the DPDK application and the rest
of the traffic will be received by the kernel.
But if we want to receive most of the traffic in DPDK except specific
pattern (example: ICMP packets) that should be processed by the kernel,
then it's easier to re-route these packets with a single rule.
This commit introduces new rte_flow action which allows application to
re-route packets directly to the kernel without software involvement.
Add new testpmd rte_flow action 'send_to_kernel'. The application
may use this action to route the packet to the kernel while still
in the HW.
Example with testpmd command:
flow create 0 ingress priority 0 group 1 pattern eth type spec 0x0800
type mask 0xffff / end actions send_to_kernel / end
Signed-off-by: Michael Savisko <michaelsav@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Using rte_mtr_color_in_protocol_set(), user can configure
combination of protocol headers, like outer_vlan and outer_ip,
can be enabled on given meter object.
But rte_mtr_meter_vlan_table_update() and
rte_mtr_meter_dscp_table_update() do not have information that
which table needs to be updated corresponding to protocol header
i.e. inner or outer.
Adding protocol paramreter will allow user to provide required
protocol information so that corresponding inner or outer table
can be updated corresponding to protocol header.
If user wishes to configure both inner and outer table then
API must be called twice with correct protocol information.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Create a new Flow API action: METER_MARK.
It Meters a packet stream and marks its packets with colors.
The marking is done on a metadata, not on a packet field.
Unlike the METER action, it performs no policing at all.
A user has the flexibility to create any policies with the help of
the METER_COLOR item later, only meter profile is mandatory here.
Add testpmd command line to match for METER_MARK action:
flow create ... actions meter_mark mtr_profile 20 / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Provide an ability to use a Color Marker set by a Meter
as a matching item in Flow API. The Color Marker reflects
the metering result by setting the metadata for a
packet to a particular codepoint: green, yellow or red.
Add testpmd command line to match on a meter color:
flow create 0 ingress group 0 pattern meter color is green / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As rte_flow_action_handle_create/destroy/update() have their own
asynchronous rte_flow_async_action_handle_create/destroy/update()
version functions to accelerate the indirect action operations in
queue based flow engine. Currently, the asynchronous version query
function for indirect action was missing.
Add rte_flow_async_action_handle_query() function corresponding
to rte_flow_action_handle_query(). The new asynchronous version
function enables enqueue the query to the hardware similar as
asynchronous flow management does and returns immediately to free
the CPU for other tasks. Application can get the query results from
rte_flow_pull() when the hardware completes its work.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Such deprecation was commenced in DPDK 21.11.
Since then, no parties have objected. Remove.
The patch breaks ABI.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
There are testpmd examples which demonstrate flow alteration
and steering between endpoints using outdated action PORT_ID.
Revisit these examples to make use of new port-based actions.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Remove deprecated fdir_conf from device configuration.
Assume that mode is equal to RTE_FDIR_MODE_NONE.
Add internal Flow Director configuration copy in ixgbe and txgbe device
private data since flow API supports requires it. Initialize mode to
the first flow rule mode on the rule validation or creation.
Since Flow Director configuration data types are still used by some
drivers internally, move it from public API to ethdev driver internal
API.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Dongdong Liu <liudongdong3@huawei.com>
Move related specific testpmd commands into this driver directory.
The bypass init is left in testpmd at this point and can be moved later.
While at it, fix checkpatch warnings.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Those commands date back to the early stages of DPDK when only PCI
devices were supported.
At the time, developers may have used those commands to help in
debugging their buggy^Wwork in progress drivers.
Removing them, we can drop the dependency on the PCI bus and library and
make testpmd bus agnostic.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add mlx5 internal option in testpmd similar to run-time function
"port attach" which adds another parameter named "socket" for attaching
port and add 2 devargs before.
The arguments are "cmd_fd" and "pd_handle" using to import device
created out of PMD. Testpmd application import it using IPC, and updates
the devargs list before attaching.
These arguments were added in
the commit 9d936f4f1a ("common/mlx5: support remote PD and CTX")
The syntax is:
testpmd> mlx5 port attach (identifier) socket=(path)
Where "path" is the IPC socket path agreed on the remote process.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Matan Azrad <matan@nvidia.com>
The "port config <port_id> rss-hash-key" and "show port <port_id>
rss-hash key" commands both use the 'rss_type_table[]' to get
'rss_types' or the RSS type name. So this patch uses the
'rss_type_table[]' to get the RSS types. In this way, this command
naturally supports more individual types.
Suggested-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Currently, the "port config all rss xx" command uses 'ether' name to match
and to set 'RTE_ETH_RSS_L2_PAYLOAD' offload. However, others RSS command,
such as, "port config <port_id> rss-hash-key" and "show port <port_id>
rss-hash key", use 'l2-payload' to represent this offload. So this patch
unifies the name of 'RTE_ETH_RSS_L2_PAYLOAD' offload.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
To enable input coloring, based on VLAN or DSCP, patch adds
command line interface to configure the following:
- configuring input coloring using VLAN or DSCP while creating
meter i.e. during rte_mtr_create()
- Update VLAN input coloring table at runtime.
- configures protocol priorities.
- retrieve protocol and priority information
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Move related specific testpmd commands into this driver directory.
While at it, fix checkpatch warnings.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Move related specific testpmd commands into this driver directory.
While at it, fix checkpatch warnings.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
A new event RTE_ETH_EVENT_RX_AVAIL_THRESH should be generated by HW
when number of available descriptors in Rx queue goes below the
threshold.
The threshold is defined as a percentage of an Rx queue size with valid
values from 0 to 99 (inclusive). Zero (default) value disables it.
There is no capability reporting for the feature. Application should
simply try to set required threshold value and handle result.
Add testpmd commands to control the threshold:
set port <port_id> rxq <rxq_id> avail_thresh <avail_thresh_num>
Signed-off-by: Spike Du <spiked@nvidia.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduce a testpmd API so that drivers can register specific commands.
A driver can list some files to compile with testpmd, by setting them
in the testpmd_sources (driver local) meson variable.
drivers/meson.build then takes care of appending this to a global meson
variable, and adding the driver to testpmd dependency.
Note: testpmd.h is fixed to that it is self sufficient when being
included.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add testpmd support for the rte_flow_async_action_handle API.
Provide the command line interface for operations dequeue.
Usage example:
flow queue 0 indirect_action 0 create action_id 9
ingress postpone yes action rss / end
flow queue 0 indirect_action 0 update action_id 9
action queue index 0 / end
flow queue 0 indirect_action 0 destroy action_id 9
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_pull API.
Provide the command line interface for pulling operations results.
Usage example: flow pull 0 queue 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_push API.
Provide the command line interface for pushing operations.
Usage example: flow queue 0 push 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_q_create/rte_flow_q_destroy API.
Provide the command line interface for enqueueing flow
creation/destruction operations. Usage example:
testpmd> flow queue 0 create 0 postpone no
template_table 6 pattern_template 0 actions_template 0
pattern eth dst is 00:16:3e:31:15:c3 / end actions drop / end
testpmd> flow queue 0 destroy 0 postpone yes rule 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_table API.
Provide the command line interface for the flow
table creation/destruction. Usage example:
testpmd> flow template_table 0 create table_id 6
group 9 priority 4 ingress mode 1
rules_number 64 pattern_template 2 actions_template 4
testpmd> flow template_table 0 destroy table 6
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_pattern_template and
rte_flow_actions_template APIs. Provide the command line interface
for the template creation/destruction. Usage example:
testpmd> flow pattern_template 0 create pattern_template_id 2
template eth dst is 00:16:3e:31:15:c3 / end
testpmd> flow actions_template 0 create actions_template_id 4
template drop / end mask drop / end
testpmd> flow actions_template 0 destroy actions_template 4
testpmd> flow pattern_template 0 destroy pattern_template 2
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add testpmd support for the rte_flow_configure API.
Provide the command line interface for the Flow management.
Usage example: flow configure 0 queues_number 8 queues_size 256
Implement rte_flow_info_get API to get available resources:
Usage example: flow info 0
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add gre_option command for matching optional fields
(checksum/key/sequence) in GRE header. The item must follow gre item,
and the item does not change the flags in gre item, the application
should set the flags in gre item correspondingly.
Application can still use gre_key item 'gre_key value is xx' for key
matching, the effect is the same with using 'gre_option key is xx'.
The examples for gre_option are as follows:
To match on checksum field with value 0x11:
testpmd> ... pattern / eth / gre c_bit is 1 / gre_option checksum is
0x11 / end ..
To match on checksum field with value 0x11 and any value of key:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 1 / gre_option
checksum is 0x11 / end ..
To match on checksum field with value 0x11 and no key field in packet:
testpmd> ... pattern / eth / gre c_bit is 1 k_bit is 0 / gre_option
checksum is 0x11 / end ..
The invalid patterns for gre_option are as follows:
testpmd> ... pattern / eth / gre / gre_option checksum is 0x11 / end ..
(c_bit in gre item not present)
testpmd> ... pattern / eth / gre c_bit is 0 / gre_option checksum is 0x11 /
end .. (c_bit is unset for gre item, but checksum is
specified by gre_option item)
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch adds L2TPv2 control message and 5 types of data message
support for testpmd.
The added L2TPv2 message types are listed below:
1. L2TPv2 control
2. L2TPv2
3. L2TPv2 + length option
4. L2TPv2 + sequence option
5. L2TPv2 + offset option
6. L2TPv2 + length option + sequence option
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch defines new RSS offload type for L2TPv2, which
is required when users want to distribute packets based on
the L2TPv2 session ID field.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Patch adds command line options to configure queue based
priority flow control.
- Syntax command is given as below:
set pfc_queue_ctrl <port_id> rx <on|off> <tx_qid> <tx_tc> \
tx <on|off> <rx_qid> <rx_tc> <pause_time>
- Example command to configure queue based priority flow control
on rx and tx side for port 0, Rx queue 0, Tx queue 0 with pause
time 2047
testpmd> set pfc_queue_ctrl 0 rx on 0 0 tx on 0 0 2047
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch enables method to provide key and mask for raw rules
to be provided as hexadecimal values. There is new parameter
pattern_mask added to support this.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The current approach detects the proxy port on each port (re-)plug and
may spam the log with error messages if the PMD does not support flows.
As testpmd is a debug tool, it must not do such implicit port handling.
Instead, the new API should be called only when the user requests that.
Revoke the existing code. Implement an explicit command-line primitive
to let the user find the proxy port themselves. Provide relevant hints.
Fixes: 1179f05cc9 ("ethdev: query proxy port to manage transfer flows")
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
To support shared Rx queue, this patch introduces dedicate forwarding
engine. The engine groups received packets by mbuf->port into sub-group,
updates stream statistics and simply frees packets.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Adds "--rxq-share=X" parameter to enable shared RxQ.
Rx queue is shared if device supports, otherwise fallback to standard
RxQ.
Shared Rx queues are grouped per X ports. X defaults to UINT32_MAX,
implies all ports join share group 1. Queue ID is mapped equally with
shared Rx queue ID.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
