Replace RTE_EVENT_DEV_CAP_REQUIRES_MAINT, which signaled the need
for the application to call rte_event_maintain(), with
RTE_EVENT_DEV_CAP_MAINTENANCE_FREE, which does the opposite (i.e.,
signifies that the event device does not require maintenance).
This approach is more in line with how other eventdev hardware and/or
software limitations are handled in the Eventdev API.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Set the RTE_EVENT_DEV_CAP_REQUIRES_MAINT flag, and perform DSW
background tasks on rte_event_maintain() calls.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Tested-by: Richard Eklycke <richard.eklycke@ericsson.com>
Tested-by: Liron Himi <lironh@marvell.com>
Hide rte_event_timer_adapter_pmd.h file as it is an internal file.
Remove rte_ prefix from rte_event_timer_adapter_ops structure.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Invoke event_dev_probing_finish() function at the end of probing,
this function sets the function pointers in the fp_ops flat array.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Mark all the driver specific functions as internal, remove
`rte` prefix from `struct rte_eventdev_ops`.
Remove experimental tag from internal functions.
Remove `eventdev_pmd.h` from non-internal header files.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Set the appropriate capability flags for the RX, crypto and timer
eventdev adapters to use.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Tested-by: Heng Wang <heng.wang@ericsson.com>
The rte_eventdev_pmd*.h files are for drivers only and should be private
to DPDK, and not installed for app use.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit implements the eventdev ABI changes required by
the DLB/DLB2 PMDs. Several data structures and constants are modified
or added in this patch, thereby requiring modifications to the
dependent apps and examples.
The DLB/DLB2 hardware does not conform exactly to the eventdev interface.
1) It has a limit on the number of queues that may be linked to a port.
2) Some ports a further restricted to a maximum of 1 linked queue.
3) DLB does not have the ability to carry the flow_id as part
of the event (QE) payload. Note that the DLB2 hardware is capable of
carrying the flow_id.
Following is a detailed description of the changes that have been made.
1) Add new fields to the rte_event_dev_info struct. These fields allow
the device to advertise its capabilities so that applications can take
the appropriate actions based on those capabilities.
struct rte_event_dev_info {
uint32_t max_event_port_links;
/**< Maximum number of queues that can be linked to a single event
* port by this device.
*/
uint8_t max_single_link_event_port_queue_pairs;
/**< Maximum number of event ports and queues that are optimized for
* (and only capable of) single-link configurations supported by this
* device. These ports and queues are not accounted for in
* max_event_ports or max_event_queues.
*/
}
2) Add a new field to the rte_event_dev_config struct. This field allows
the application to specify how many of its ports are limited to a single
link, or will be used in single link mode.
/** Event device configuration structure */
struct rte_event_dev_config {
uint8_t nb_single_link_event_port_queues;
/**< Number of event ports and queues that will be singly-linked to
* each other. These are a subset of the overall event ports and
* queues; this value cannot exceed *nb_event_ports* or
* *nb_event_queues*. If the device has ports and queues that are
* optimized for single-link usage, this field is a hint for how many
* to allocate; otherwise, regular event ports and queues can be used.
*/
}
3) Replace the dedicated implicit_release_disabled field with a bit field
of explicit port capabilities. The implicit_release_disable functionality
is assigned to one bit, and a port-is-single-link-only attribute is
assigned to other, with the remaining bits available for future assignment.
* Event port configuration bitmap flags */
#define RTE_EVENT_PORT_CFG_DISABLE_IMPL_REL (1ULL << 0)
/**< Configure the port not to release outstanding events in
* rte_event_dev_dequeue_burst(). If set, all events received through
* the port must be explicitly released with RTE_EVENT_OP_RELEASE or
* RTE_EVENT_OP_FORWARD. Must be unset if the device is not
* RTE_EVENT_DEV_CAP_IMPLICIT_RELEASE_DISABLE capable.
*/
#define RTE_EVENT_PORT_CFG_SINGLE_LINK (1ULL << 1)
/**< This event port links only to a single event queue.
*
* @see rte_event_port_setup(), rte_event_port_link()
*/
#define RTE_EVENT_PORT_ATTR_IMPLICIT_RELEASE_DISABLE 3
/**
* The implicit release disable attribute of the port
*/
struct rte_event_port_conf {
uint32_t event_port_cfg;
/**< Port cfg flags(EVENT_PORT_CFG_) */
}
This patch also removes the depreciation notice and announce
the new eventdev ABI changes in release note.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
DSW limits the rate of migrations on a per-port basis. Hence, as the
number of cores grows, so does the total migration capacity.
In high core-count systems, this allows for a situation where flows
are migrated to a lightly loaded port which recently already received
a number of new flows (from other ports). The processing load
generated by these new flows may not yet be reflected in the lightly
loaded port's load estimate. The result is that the previously lightly
loaded port is now overloaded.
This patch adds a rough estimate of the size of the inbound migrations
to a particular port, which can be factored into the migration logic,
avoiding the above problem.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Replace DSW's use of regular DPDK rings (and code for
packing/unpacking control messages into void pointers) with custom
size rings.
In addition to cleaner code, this change allows DSW to support up to
the eventdev API's maximum of 255 ports by tweaking DSW_MAX_PORTS.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The scheduling type parameter is not applicable for single link
queues. DSW would, at the time of rte_event_queue_setup(), erroneously
verify that scheduling type was one of the supported types, and
returned -ENOTSUP in case of RTE_SCHED_TYPE_ORDERED.
Fixes: 4540ee9c68 ("event/dsw: add device and queue configuration")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Gage Eads <gage.eads@intel.com>
The DSW event device didn't set RTE_EVENT_DEV_CAP_MULTIPLE_QUEUE_PORT
and RTE_EVENT_DEV_CAP_NONSEQ_MODE, even though it has both these
capabilities.
Fixes: 4540ee9c68 ("event/dsw: add device and queue configuration")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The DSW event device now implements the 'xstats' interface and a
number of port- and device-level counters.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
The DSW event device will now attempt to migrate (move) flows between
ports in order to balance the load.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
The DSW event device port now attempts to estimate its load (i.e. how
busy it is). This is required for load balancing to work (although
load balancing is not included in this patch), and may also be useful
for debugging purposes.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
With this patch, the DSW event device can be started and stopped,
and also supports scheduling events between ports.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added support for linking and unlinking ports to queues in a DSW event
device.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Allow port setup and release in the DSW event device.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Allow queue- and device-level configuration for and retrieval of
contextual information from a DSW event device.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch contains the Meson and GNU Make build system extensions
required for the Distributed Event Device, and also the initialization
code for the driver itself.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
