This patch adds unicast and multicast set interfaces.
Application can add or remove unicast MAC address, also can set
multicast MAC address, the maximum multicast list size is 2048.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
When enable allmulticast mode, all multicast packets
can be received. This patch also adds support for MTU set,
the range of MTU is from 256 to 9600.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
This patch introduces some HW interfaces required for SR-IOV function,
including: init hwdev, set port state, get default cos,
VF DMA attribute table, VF txrx flush and so on.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
Add mbox command channel for SR-IOV, which is used to
communicate between VF and VF, VF and PF. This patch
introduces data structures, initialization, interfaces
and commands of mbox channel.
Signed-off-by: Xiaoyun Wang <cloud.wangxiaoyun@huawei.com>
There is no need to assign return value to a temporary variable.
Instead return error directly in case of failure.
Fixes: 1fe427fd08 ("net/bnxt: support enable/disable interrupt")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Driver issues hwrm_if_change when the port is started and stopped.
This command returns whether the fw has undergone a reset while port
was down. Fix to handle hwrm_if_change status during port start only.
Fixes: 0b53359123 ("net/bnxt: inform firmware about IF state changes")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Driver issues hwrm_if_change when the port is started. This command
returns whether the fw has undergone a reset while port was down and
driver does re-init of resources if fw has undergone a reset.
Fix to enable interrupts only after this check.
Fixes: c023cd5b21 ("net/bnxt: fix async link handling and update")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
DPDK PCIe-VFIO framework configures base MSIX vector for interrupts
which is supported by other h/w. In case of bnxt, base MSIX vector
starts with the RX completion queue 0. To comply with the DPDK
framework We need to increase the map index by 1 so that RXTX
completion queues events can be delivered to appropriate event listeners
by kernel VFIO.
Fixes: bd0a14c99f ("net/bnxt: use dedicated CPR for async events")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In stop_op(), don't wait for link down event's ASYNC response from FW.
Fixes: c023cd5b21 ("net/bnxt: fix async link handling and update")
Cc: stable@dpdk.org
Signed-off-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The HWRM command timeout is set to a very high value.
VER_GET command response returns the default request timeout value.
Use this value for waiting for HWRM commands to complete.
Poll for the valid bit every 1us instead of 600us.
Fixes: cbcd375d37 ("net/bnxt: fix HWRM macros and locking")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
We are currently logging trusted VF information everytime a VF config
change is indicated by the async message. Update it only when new
setting is different from the current setting.
Fixes: b42c15c83e ("net/bnxt: support trusted VF")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
bnxt.h header includes bnxt_cpr.h and bnxt_util.h.
There is no need to include these headers file explicitly.
This commit does not cause any functional change.
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently bnxt driver does not return error in case setting link up fails.
Fixes: 5c206086fe ("net/bnxt: add link state operations")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
If the VF resources need to be reconfigured using the
bnxt_hwrm_func_reserve_vf_resc, make sure that the default completion
ring is freed first before the resources are reserved.
Reallocate the ring once the VF resources are configured.
Fixes: 7bc8e9a227 ("net/bnxt: support async link notification")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch fixes few checks and few return values while getting
and clearing device statistics.
1. Fixed to return standard error code.
2. Clubbed few error checks
3. Removed an unnecessary return check
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Fixes: 8892013668 ("net/bnxt: support xstats get by id")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch add link related operations like
link update, up and down.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
To update MAC address or MTU, operations are
added to the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add support for supported packet types
by the platform andbasic statistics like
numbers of packets/bytes receive and transmit.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
HIF or host interface is responsible for transmit
and receive packets between physical ethernet
interfaces and HIF library defined logical interfaces.
This patch initialise that host interface and MAC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This patch add some hardware specific macros
and functions that will be used by the driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
This code is being shared by more than 1 type of driver.
Common is most appropriate place for it.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
When OS sends more packets than are being read with a single
'rte_eth_rx_burst' call, rx packets are getting stucked in the tap pmd
and are unable to receive, because trigger_seen is getting updated
and consecutive calls are not getting any packets.
Do not update trigger_seen unless less than a max number of packets were
received allowing next call to receive the rest.
Remove unnecessary compiler barrier.
Fixes: a0d8e807d9 ("net/tap: add Rx trigger")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Tested-by: Mariusz Drost <mariuszx.drost@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Flow Manager API is the new firmware interface that exposes match
action capabilities in 1400 series VIC adapters. It is intended for
virtual switch offloads and enables more advanced features than the
existing filter API. For example, it supports VXLAN encap and decap
actions, and exposes TCAM and exact match tables.
Add the new flow implementation using Flow Manager and use it when
available. When Flow Manager is not available, the driver will
continue to use the old filter-based flow implementation.
Signed-off-by: John Daley <johndale@cisco.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Latest firmware supports Geneve with options offload. Current overlay
offload only supports Geneve with no options. This new feature is
disabled by default, as it is intrusive and cannot be used with flow
API. Add a new devarg 'geneve-opt' so the user can explicitly enable
it.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Both primary and secondary processes may call the queue start/stop,
link update handlers. These functions use the rte_eth_dev pointer
cached in the adapter private data (struct enic). But, this pointer is
valid only in the primary process, as rte_eth_dev addresses may differ
in different processes. Using that cached pointer in secondary
processes leads to a crash.
For the link update handler (enic_link_update), use the rte_eth_dev
pointer passed down from the rte layer as it is valid in the current
process. For the queue start/stop handlers (enic_start_wq and
friends), cache the rte_eth_dev_data pointer in the adapter private
data, and use that. rte_eth_dev_data is in shared memory and its
address is same across processes.
Fixes: 837e68ae94 ("net/enic: fix queue stop and start")
Fixes: cf8d9826b7 ("net/enic: extract code for checking link status")
Cc: stable@dpdk.org
Reported-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Reviewed-by: John Daley <johndale@cisco.com>
Only the primary process initializes the adapter private data and
rte_eth_dev_data. For secondary processes, do not touch them.
Secondary processes need to select the right Tx and Rx handlers. Pick
the same handlers that the primary process uses.
Fixes: fefed3d1e6 ("enic: new driver")
Cc: stable@dpdk.org
Reported-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Tested-by: Dirk-Holger Lenz <dirk.lenz@ng4t.com>
Reviewed-by: John Daley <johndale@cisco.com>
Patch adds a runtime function to display port supported ptypes
in different layers.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Use correct flag for indicating QinQ strip rx offload.
Fixes: dfebfc9882 ("ethdev: support dynamic configuration of QinQ strip")
Cc: stable@dpdk.org
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Adding support to parse GTPU flag for RSS hash index calculation in
octeontx2.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding support to enable GTPU eth flow type for RSS hash
index calculation.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
MC firmware is the core component of FSLMC bus and net/DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.14.x version. This
patch bumps the min supported version to 10.18.x.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch add definitions of maximal data length in module EEPROM,
values are compatible with include/uapi/linux/ethtool.h.
These definitions can be used by application to validate data length.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 76d29903f5 ("bond: support link status interrupt")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
On rare situation test_link_bonding test case fail due to timespec
tv_nsec overflow, which causes pthread_cond_timedwait to return EINVAL
and test to fail.
Fixes: 76d29903f5 ("bond: support link status interrupt")
Cc: stable@dpdk.org
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Traffic bps statistics is very useful for performance testing.
Add bits per second statistics for Rx and Tx.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Moti Haimovsky <motih@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_ah in order to match the Authentication Header
based on RFC 2402.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_igmp in order to match the Internet Group
Management Protocol based on RFC 2236.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new rte_flow_item_nsh in order to match the network service header
based on RFC 8300.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The receive queues list size is based on the size of uint32_t, so
when allocating the memory, the correct value should be used. Or
else there is risk to corrupt the memory, depending on the queues
number, because there is some pad area for alignment. If the queue
number is not large enough, the issue couldn't be observed.
Fixes: dc9ceff73c ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The Item order validation between L2 and L3 is missing, which leading to
the following flow rule is accepted:
testpmd> flow create 0 ingress pattern ipv4 / eth / end actions drop /
end
Only the outer L3 layer should check whether the L2 layer is present,
because the L3 layer could directly follow the tunnel layer
without L2 layer.
Meanwhile inner L2 layer should check whether there is inner L3 layer
before it.
Fixes: 23c1d42c71 ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
