This patch adds support for rte flow action type port_id to
enable directing packets from an input port PF to an output
port which is a VF of the input port PF.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CNF10KA does not differ it terms of RVU resources from
CN10KA platform hence add it to list of devices respective
drivers support.
Otherwise devices on CNF10KA are not probed even though
compatible drivers exist.
Signed-off-by: Tomasz Duszynski <tduszynski@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Meters are configured per flow using rte_flow_create API.
Patch adds support for destroy operation for meter action
applied on the flow.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Meters are configured per flow using rte_flow_create API.
Implement support for meter action applied on the flow.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to read and update stats corresponding to
given meter instance for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to update DSCP table for pre-coloring for
incoming packet per nixlf for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to enable or disable meter instance for
CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to delete meter instance for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to create meter instance for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to delete meter policy for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to add meter policy for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to validate meter policy for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to delete meter profile for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement API to add meter profile for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implement ethdev operation to get meter capabilities for
CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To enable support for ingress meter, supported operations
are exposed for CNXK platform.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Setting MTU bigger than RTE_ETHER_MTU requires the jumbo frame support,
and application should enable the jumbo frame offload support for it.
When jumbo frame offload is not enabled by application, but MTU bigger
than RTE_ETHER_MTU is requested there are two options, either fail or
enable jumbo frame offload implicitly.
Enabling jumbo frame offload implicitly is selected by many drivers
since setting a big MTU value already implies it, and this increases
usability.
This patch moves this logic from drivers to the library, both to reduce
the duplicated code in the drivers and to make behaviour more visible.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Indirect actions should be used to do shared counters.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add RTE_ prefix to internal API defined in public header.
Use the prefix instead of double underscore.
Use uppercase for macros in the case of name conflict.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reflect globally enabled Rx and Tx offloads in queue conf.
Also fix issue with lmt data prepare for multi seg.
Fixes: a24af6361e ("net/cnxk: add Tx queue setup and release")
Fixes: a86144cd9d ("net/cnxk: add Rx queue setup and release")
Fixes: 305ca2c4c3 ("net/cnxk: support multi-segment vector Tx")
Cc: stable@dpdk.org
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds support to configure channel mask which will
be used by rte flow when adding flow rules with inline IPsec
action.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds capabitlities for AES_CBC and HMAC_SHA1 for 9k
security offload.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Sets IP6_UDP_OPT in NIX RX config to allow optional
UDP checksum for IPv6 in case of security offload.
Also disable drop_re when inline inbound is enabled.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds support to update ethertype for mixed IPsec tunnel
versions. And also sets et_overwr for inbound IPsec.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adds anti replay support for cn9k platform using
SW anti replay check.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to create and submit CPT instructions on Tx
on CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to receive CPT processed packets on Rx via
second pass on CN10K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to create and submit CPT instructions on Tx
on CN9K SoC.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support to receive CPT processed packets on Rx for
CN9K.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for inline inbound and outbound IPSec for SA create,
destroy and other NIX / CPT LF configurations.
This patch also changes dpdk-devbind.py to list new inline
device as misc device.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for inline inbound and outbound IPSec for SA create,
destroy and other NIX / CPT LF configurations.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adjust parameters order to eth_xstats_get_by_id_t prototype.
Make ids the second parameter similar to eth_xstats_get_by_id_t.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding a new callback for reading the link status. PF can read its
link status and can forward the same to VF once it comes up.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
CPT can be told to submit events to SSO upon completion.
Crypto adapter uses this feature and the new flag can be
used to optimize receive path in those cases.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add Rx event vector fastpath to convert HW defined metadata into
rte_mbuf and rte_event_vector.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add event vector support for cnxk event Rx adapter, add control path
APIs to get vector limits and ability to configure event vectorization
on a given Rx queue.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add support for rte_flow_item_raw to parse custom L2 and L3
protocols.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Set link status to down and don't fetch link status from kernel
when device in stopped state.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Preallocation of MCAM entries is not valid anymore since the
AF side MCAM allocation scheme has changed. This patch disables
preallocation by changing the default MCAM preallocation size
from 8 to 1.
Fixes: 168c59cfe4 ("net/octeontx2: add flow MCAM utility functions")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
