If the socket ID of a device is unknown, rte_eth_dev_socket_id(portid)
now returns -1 instead of 0 since commit 7dcd73e379 ("drivers/bus: set
device NUMA node to unknown by default").
This change breaks the pmd_perf test on environment where the device
socket ID is unknown. The test fails with the following error, because
it does not find a lcore on socket -1:
> No avail lcore to run test
Take the new behavior in account in the pmd_perf test: in this
environment, the test can now run on any lcore, and not only those from
socket 0 (this was the old behavior).
Bugzilla ID: 1105
Fixes: 7dcd73e379 ("drivers/bus: set device NUMA node to unknown by default")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Lingli Chen <linglix.chen@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When using dumpcap in container environment or with multiple
DPDK processes, it is useful to be able to specify file prefix.
This version only accepts the long format option used by
other commands. If no prefix is specified then the default
is used.
Suggested-by: Arshdeep Kaur <arshdeep.kaur@intel.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Arshdeep Kaur <arshdeep.kaur@intel.com>
The change to do argument process before EAL init broke
the support of select-interface option. Fix by setting flag
and doing select-interface later.
Fixes: a8dde09f97 ("app/dumpcap: allow help/version without primary process")
Cc: stable@dpdk.org
Signed-off-by: Arshdeep Kaur <arshdeep.kaur@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
When dumpcap is run with a longer path name such as when
testing, the file prefix would be computed incorrectly.
Also, print out the resulting filename which is similar to
what wireshark program does.
Fixes: cbb44143be ("app/dumpcap: add new packet capture application")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
At end of program there is call to rte_free() which is passing
a bogus value. There is no "bpf_filter" defined in this application;
it ends up being a text address inside pcap library.
Fixes: cbb44143be ("app/dumpcap: add new packet capture application")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The API does not describe that metadata dump is conditioned to enabling
any trace points.
While at it, merge dump unit tests into the generic trace_autotest to
enhance coverage.
Fixes: f6b2d65dcd ("trace: implement debug dump")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Enabling trace points at runtime was not working if no trace point had
been enabled first at rte_eal_init() time. The reason was that
trace.args reflected the arguments passed to --trace= EAL option.
To fix this:
- the trace subsystem initialisation is updated: trace directory
creation is deferred to when traces are dumped (to avoid creating
directories that may not be used),
- per lcore memory allocation still relies on rte_trace_is_enabled() but
this helper now tracks if any trace point is enabled. The
documentation is updated accordingly,
- cleanup helpers must always be called in rte_eal_cleanup() since some
trace points might have been enabled and disabled in the lifetime of
the DPDK application,
With this fix, we can update the unit test and check that a trace point
callback is invoked when expected.
Note:
- the 'trace' global variable might be shadowed with the argument
passed to the functions dealing with trace point handles.
'tp' has been used for referring to trace_point object.
Prefer 't' for referring to handles,
Fixes: 84c4fae462 ("trace: implement operation APIs")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
The API does not state that changing mode should be refused if no trace
point is enabled. Remove this limitation.
Fixes: 84c4fae462 ("trace: implement operation APIs")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sunil Kumar Kori <skori@marvell.com>
Add API to allow uncore frequency adjustment.
Uncore is a term used by Intel to describe function
of a microprocessor that are closely connected
to the core to achieve high performance.
This is done through manipulating related uncore frequency control
sysfs entries to adjust the minimum and maximum uncore frequency values
and works on Linux for Intel hardware.
Signed-off-by: Tadhg Kearney <tadhg.kearney@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
The rte_pcapng_write_packets() function fails when we try to write more
packets than the IOV_MAX limit. writev() system call is limited by the
IOV_MAX limit. The iovcnt argument is valid if it is greater than 0 and
less than or equal to IOV_MAX as defined in <limits.h>.
To avoid this problem, we can check that all segments of the next
packet will fit into the iovec buffer, whose capacity will be limited
by the IOV_MAX limit. If not, we flush the current iovec buffer to the
file by calling writev() and, if successful, fit the current packet at
the beginning of the flushed iovec buffer.
Fixes: 8d23ce8f5e ("pcapng: add new library for writing pcapng files")
Cc: stable@dpdk.org
Signed-off-by: Mário Kuka <kuka@cesnet.cz>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The change to do argument process before EAL init broke
the support of list-interfaces option.
Fix by setting flag and doing list-interfaces later.
Fixes: a8dde09f97 ("app/dumpcap: allow help/version without primary process")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Sketching algorithm provide high-fidelity approximate measurements and
appears as a promising alternative to traditional approaches such as
packet sampling.
NitroSketch [1] is a software sketching framework that optimizes
performance, provides accuracy guarantees, and supports a variety of
sketches.
This commit adds a new data structure called sketch into
membership library. This new data structure is an efficient
way to profile the traffic for heavy hitters. Also use min-heap
structure to maintain the top-k flow keys.
[1] Zaoxing Liu, Ran Ben-Basat, Gil Einziger, Yaron Kassner, Vladimir
Braverman, Roy Friedman, Vyas Sekar, "NitroSketch: Robust and General
Sketch-based Monitoring in Software Switches", in ACM SIGCOMM 2019.
https://dl.acm.org/doi/pdf/10.1145/3341302.3342076
Signed-off-by: Alan Liu <zaoxingliu@gmail.com>
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
Add command line parameter:
--rxhdrs=eth[,ipv4]
Set the protocol_hdr of segments to scatter packets on receiving if
split feature is engaged. And the queues with BUFFER_SPLIT flag.
Add interactive mode command:
testpmd>set rxhdrs eth,ipv4,ipv4-udp
(protocol sequence should be valid)
The protocol split feature is off by default. To enable protocol split,
you need:
1. Start testpmd with multiple mempools. E.g. --mbuf-size=2048,2048
2. Configure Rx queue with rx_offload buffer split on.
3. Set the protocol type of buffer split. E.g. set rxhdrs eth,eth-ipv4
(default protocols of testpmd : eth|ipv4|ipv6|ipv4-tcp|ipv6-tcp|
ipv4-udp|ipv6-udp|ipv4-sctp|ipv6-sctp|grenat|inner-eth|
inner-ipv4|inner-ipv6|inner-ipv4-tcp|inner-ipv6-tcp|
inner-ipv4-udp|inner-ipv6-udp|inner-ipv4-sctp|inner-ipv6-sctp)
Above protocols can be configured in testpmd. But the configuration can
only be applied when it is supported by specific pmd.
Signed-off-by: Yuan Wang <yuanx.wang@intel.com>
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Added parameters in rte_bbdev_queue_data to expose information
with regards to any queue related failure and warning
which cannot be supported in existing API.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Updated the enum for rte_bbdev_op_type
to allow to keep ABI compatible for enum insertion
while adding padded maximum value for array need.
Removing RTE_BBDEV_OP_TYPE_COUNT and instead exposing
RTE_BBDEV_OP_TYPE_SIZE_MAX.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
IOVA mode in DPDK is either PA or VA.
The new build option enable_iova_as_pa configures the mode to PA
at compile time.
By default, this option is enabled.
If the option is disabled, only drivers which support it are enabled.
Supported driver can set the flag pmd_supports_disable_iova_as_pa
in its build file.
mbuf structure holds the physical (PA) and virtual address (VA).
If IOVA as PA is disabled at compile time, PA field (buf_iova)
of mbuf is redundant as it is the same as VA
and is replaced by a dummy field.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Used rte_mbuf_data_iova API to get the physical address of mbuf data.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Added APIs rte_mbuf_iova_set and rte_mbuf_iova_get to set and get the
physical address of an mbuf respectively. Updated applications and
library to use the same.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds the hairpin-conf command line parameter to flow-perf
application. hairpin-conf parameter takes a hexadecimal bitmask with
bits having the following meaning:
- Bit 0 - Force memory settings of hairpin RX queue.
- Bit 1 - Force memory settings of hairpin TX queue.
- Bit 4 - Use locked device memory for hairpin RX queue.
- Bit 5 - Use RTE memory for hairpin RX queue.
- Bit 8 - Use locked device memory for hairpin TX queue.
- Bit 9 - Use RTE memory for hairpin TX queue.
Signed-off-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
This patch extends hairpin-mode command line option of test-pmd
application with an ability to configure whether Rx/Tx hairpin queue
should use locked device memory or RTE memory.
For purposes of this configurations the following bits of 32 bit
hairpin-mode are reserved:
- Bit 8 - If set, then force_memory flag will be set for hairpin RX
queue.
- Bit 9 - If set, then force_memory flag will be set for hairpin TX
queue.
- Bits 12-15 - Memory options for hairpin Rx queue:
- Bit 12 - If set, then use_locked_device_memory will be set.
- Bit 13 - If set, then use_rte_memory will be set.
- Bit 14 - Reserved for future use.
- Bit 15 - Reserved for future use.
- Bits 16-19 - Memory options for hairpin Tx queue:
- Bit 16 - If set, then use_locked_device_memory will be set.
- Bit 17 - If set, then use_rte_memory will be set.
- Bit 18 - Reserved for future use.
- Bit 19 - Reserved for future use.
Signed-off-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
This commit extends the timeout for service_may_be_active()
from 100ms to 1000ms. Local testing on a idle and loaded system
(compiling DPDK with all cores) always completes after 1 ms.
The wait time for a service-lcore to finish is also extended
from 100ms to 1000ms.
The same timeout waiting code was duplicated in two tests, and
is now refactored to a standalone function avoiding duplication.
Reported-by: David Marchand <david.marchand@redhat.com>
Suggested-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Test basic functionality and demonstrate use of following thread
attributes api. Additionally, test attributes are processed when
supplied to rte_thread_create().
* rte_thread_attr_init
* rte_thread_attr_set_affinity
* rte_thread_attr_get_affinity
* rte_thread_attr_set_priority
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Test basic functionality and demonstrate use of following thread
lifetime api.
* rte_thread_create
* rte_thread_detach
* rte_thread_equal
* rte_thread_join
Existing tests are updated to adapt to the thread_main function
prototype change.
The dependency on the pthread API can then be removed.
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
The rate parameter modified to uint32_t, so that it can work
for more than 64 Gbps.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As announced in the deprecation note, remove the Rx offload flag
'RTE_ETH_RX_OFFLOAD_HEADER_SPLIT' and 'split_hdr_size' field from
the structure 'rte_eth_rxmode'. Meanwhile, the place where the examples
and apps initialize the 'split_hdr_size' field, and where the drivers
check if the 'split_hdr_size' value is 0 are also removed.
User can still use `RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT` for per-queue packet
split offload, which is configured by 'rte_eth_rxseg_split'.
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
In some cases application may receive a packet that should have been
received by the kernel. In this case application uses KNI or other means
to transfer the packet to the kernel.
With bifurcated driver we can have a rule to route packets matching
a pattern (example: IPv4 packets) to the DPDK application and the rest
of the traffic will be received by the kernel.
But if we want to receive most of the traffic in DPDK except specific
pattern (example: ICMP packets) that should be processed by the kernel,
then it's easier to re-route these packets with a single rule.
This commit introduces new rte_flow action which allows application to
re-route packets directly to the kernel without software involvement.
Add new testpmd rte_flow action 'send_to_kernel'. The application
may use this action to route the packet to the kernel while still
in the HW.
Example with testpmd command:
flow create 0 ingress priority 0 group 1 pattern eth type spec 0x0800
type mask 0xffff / end actions send_to_kernel / end
Signed-off-by: Michael Savisko <michaelsav@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
These actions are supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
The action is supported by no drivers.
The patch breaks ABI.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Using rte_mtr_color_in_protocol_set(), user can configure
combination of protocol headers, like outer_vlan and outer_ip,
can be enabled on given meter object.
But rte_mtr_meter_vlan_table_update() and
rte_mtr_meter_dscp_table_update() do not have information that
which table needs to be updated corresponding to protocol header
i.e. inner or outer.
Adding protocol paramreter will allow user to provide required
protocol information so that corresponding inner or outer table
can be updated corresponding to protocol header.
If user wishes to configure both inner and outer table then
API must be called twice with correct protocol information.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Create a new Flow API action: METER_MARK.
It Meters a packet stream and marks its packets with colors.
The marking is done on a metadata, not on a packet field.
Unlike the METER action, it performs no policing at all.
A user has the flexibility to create any policies with the help of
the METER_COLOR item later, only meter profile is mandatory here.
Add testpmd command line to match for METER_MARK action:
flow create ... actions meter_mark mtr_profile 20 / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Extend modify_field Flow API with support of Meter Color Marker
modifications. It allows setting the packet's metadata to any
color marker: green, yellow or red. A user is able to specify
an initial packet color for Meter API or create simple Metering
and Marking flow rules based on his own coloring algorithm.
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Provide an ability to use a Color Marker set by a Meter
as a matching item in Flow API. The Color Marker reflects
the metering result by setting the metadata for a
packet to a particular codepoint: green, yellow or red.
Add testpmd command line to match on a meter color:
flow create 0 ingress group 0 pattern meter color is green / end
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add all necessary elements for DPDK to compile and run EAL on
LoongArch64 Soc.
This includes:
- EAL library implementation for LoongArch ISA.
- meson build structure for 'loongarch' architecture.
RTE_ARCH_LOONGARCH define is added for architecture identification.
- xmm_t structure operation stubs as there is no vector support in
the current version for LoongArch.
Compilation was tested on Debian and CentOS using loongarch64
cross-compile toolchain from x86 build hosts. Functions were tested
on Loongnix and Kylin which are two Linux distributions supported
LoongArch host based on Linux 4.19 maintained by Loongson
Corporation.
We also tested DPDK on LoongArch with some external applications,
including: Pktgen-DPDK, OVS, VPP.
The platform is currently marked as linux-only because there is no
other OS than Linux support LoongArch host currently.
The i40e PMD driver is disabled on LoongArch because of the absence
of vector support in the current version.
Similar to RISC-V, the compilation of following modules has been
disabled by this commit and will be re-enabled in later commits as
fixes are introduced:
net/ixgbe, net/memif, net/tap, example/l3fwd.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
RTE_TEST_[RT]X_DESC_DEFAULT and RTE_TEST_[RT]X_DESC_MAX macros have been
copied in a lot of app/ and examples/ code.
Those macros are local to each program.
They are not related to a DPDK public header/API, drop the RTE_TEST_
prefix.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@amd.com>
Introduce a per-lcore counter for the total time spent on processing
services on that core.
This counter is useful when measuring individual lcore load.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit improves the performance reporting of the service
cores polling loop to show both with and without statistics
collection modes. Collecting cycle statistics is costly, due
to calls to rte_rdtsc() per service iteration.
Reported-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Suggested-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
The function return type is changed to fixed width uint32_t
to be consistent with what appears to be the original authors intent.
It doesn't make much sense to return signed integers for these functions.
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Structure rte_security_session is moved to internal
headers which are not visible to applications.
The only field which should be used by app is opaque_data.
This field can now be accessed via set/get APIs added in this
patch.
Subsequent changes in app and lib are made to compile the code.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
As per current design, rte_security_session_create()
unnecessarily use 2 mempool objects for a single session.
To address this, the API will now take only 1 mempool
object instead of 2. With this change, the library layer
will get the object from mempool and session priv data is
stored contiguously in the same mempool object.
User need to ensure that the mempool created in application
is big enough for session private data as well. This can be
ensured if the pool is created after getting size of session
priv data using API rte_security_session_get_size().
Since set and get pkt metadata for security sessions are now
made inline for Inline crypto/proto mode, a new member fast_mdata
is added to the rte_security_session.
To access opaque data and fast_mdata will be accessed via inline
APIs which can do pointer manipulations inside library from
session_private_data pointer coming from application.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
Structure rte_cryptodev_sym_session is moved to internal
headers which are not visible to applications.
The only field which should be used by app is opaque_data.
This field can now be accessed via set/get APIs added in this
patch.
Subsequent changes in app and lib are made to compile the code.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
As per current design, rte_cryptodev_sym_session_create() and
rte_cryptodev_sym_session_init() use separate mempool objects
for a single session.
And structure rte_cryptodev_sym_session is not directly used
by the application, it may cause ABI breakage if the structure
is modified in future.
To address these two issues, the rte_cryptodev_sym_session_create
will take one mempool object that the session and session private
data are virtually/physically contiguous, and initializes both
fields. The API rte_cryptodev_sym_session_init is removed.
rte_cryptodev_sym_session_create will now return an opaque session
pointer which will be used by the app and other APIs.
In data path, opaque session pointer is attached to rte_crypto_op
and the PMD can call an internal library API to get the session
private data pointer based on the driver id.
Note: currently single session may be used by different device
drivers, given it is initialized by them. After the change the
session created by one device driver cannot be used or
reinitialized by another driver.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Tested-by: Gagandeep Singh <g.singh@nxp.com>
Tested-by: David Coyle <david.coyle@intel.com>
Tested-by: Kevin O'Sullivan <kevin.osullivan@intel.com>
Introduce ability to aggregate crypto operations processed by event
crypto adapter into single event containing rte_event_vector whose event
type is RTE_EVENT_TYPE_CRYPTODEV_VECTOR.
Application should set RTE_EVENT_CRYPTO_ADAPTER_EVENT_VECTOR in
rte_event_crypto_adapter_queue_conf::flag and provide vector configuration
with respect of rte_event_crypto_adapter_vector_limits, which could be
obtained by calling rte_event_crypto_adapter_vector_limits_get, to enable
vectorization.
The event crypto adapter would be responsible for vectorizing the crypto
operations based on provided response information in
rte_event_crypto_metadata::response_info.
Updated drivers and tests accordingly to new API.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The API rte_security_get_userdata() was being unused by most of
the drivers and it was retrieving userdata from mbuf dynamic field.
Hence, the API was removed and the application can directly get the
userdata from dynamic field. This helps in removing extra checks
in datapath.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
During cleanup `rte_event_port_quiesce` should be called
irrespective of whether an event has been dequeued or not
to flush any prefetched events.
Fixes: 7da008df0c ("app/eventdev: use port quiescing")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
