Make DPDK run on ARMv7-A architecture. This patch assumes
ARM Cortex-A9. However, it is known to be working on Cortex-A7
and Cortex-A15.
Signed-off-by: Vlastimil Kosar <kosar@rehivetech.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
There several issues with alignment when compiling for ARMv7.
They are not considered to be fatal (ARMv7 supports unaligned
access of 32b words), so we just leave them as warnings. They
should be solved later, however.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Vlastimil Kosar <kosar@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
This implementation is based on IBM POWER version of
rte_cpuflags. We use software emulation of HW capability
registers, because those are usually not directly accessible
from userspace on ARM.
Signed-off-by: Vlastimil Kosar <kosar@rehivetech.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
In its current state, this driver implements the bare minimum to initialize
itself and Mellanox ConnectX-4 adapters without doing anything else
(no RX/TX for instance). It is disabled by default since it is based on the
mlx4 driver and also depends on libibverbs.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Or Ami <ora@mellanox.com>
Otherwise building with KERNELCC="ccache gcc" will fail:
ccache: invalid option -- 'p'
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The malloc library is now part of the EAL.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
librte_pmd_mlx4.so needs to be linked with libibverbs otherwise, the PMD is
not able to open Mellanox devices and the following message is printed by
testpmd at startup
"librte_pmd_mlx4: cannot access device, is mlx4_ib loaded?".
Applications dependency on libibverbs are moved to be only valid in static
mode, in shared mode, applications do not depend on it anymore,
librte_pmd_mlx4.so keeps this dependency and thus is linked with libibverbs.
MLX4 cannot be supported in combined shared library because there is no clean
way of adding -libverbs to the combined library.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some .so libraries needs to be linked with external libraries. For that the
LDLIBS and EXTRA_LDFLAGS variables should be present on the link line when
those .so files are created. PMD Makefile is responsible for filling the
LDLIBS variable with the link to the external library it needs.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This is build infrastructure changes for bnx2x driver.
- enable BNX2X poll mode driver in default config.
- add it to mk
- put entry in MAINTAINERS
Note: I intentionally did not list myself as maintainer of this
driver. QLogic has discussed taking over as maintainer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Harish Patil <harish.patil@qlogic.com>
proc_info displays statistics information including extended stats for
given DPDK ports and dumps the memory information for DPDK.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This commit adds a poll mode driver for the mPIPE hardware present on
TILE-Gx SoCs.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
This commit adds support for the TILE-Gx platform, as well as the TILE
CPU architecture. This architecture port is fairly simple due to its
reliance on generics for most arch stuff.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
The library name is now being pinned to "dpdk" instead of intel_dpdk,
powerpc_dpdk, etc. As a result, we no longer need this config item.
This patch removes it.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Signed-off-by: Zhigang Lu <zlu@ezchip.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When next ABI is enabled, the shared lib extension is .so.x.1.
That's why a double basename was introduced.
But the "ifeq NEXT_ABI" was forgotten, removing the .so
extension when NEXT_ABI is disabled.
It was preventing the linker from finding the .so libraries.
Fixes: 506f51cc0d ("mk: enable next abi preview")
Reported-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When a change makes really hard to keep ABI compatibility,
instead of waiting next release to break the ABI, it is smoother
to introduce the new code as a preview and disable it when packaging.
The flag RTE_NEXT_ABI must be used to "ifdef" the new code.
When the release is out, a dynamically linked application can use
the new shared libraries with the old ABI while developpers can prepare
their application for the next ABI by reading the deprecation notice
and easily testing the new code.
When starting the next release cycle, the "ifdefs" will be removed
and the ABI break will be marked by incrementing LIBABIVER. The map
files will also be updated.
The default value is enabled to be developer compliant.
The packagers must disable it as done in pkg/dpdk.spec.
When enabled, all shared library numbers are incremented by appending
a minor .1 to the old ABI number. In the next release, only impacted
libraries will have a major +1 increment.
The impacted libraries must provide an alternative map file to use
with this option.
The ABI policy is updated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
CONFIG_RTE_BUILD_SHARED_LIB and CONFIG_RTE_BUILD_COMBINE_LIBS does not
have quotes in their values (only y or n). That's why the variables
RTE_BUILD_SHARED_LIB and RTE_BUILD_COMBINE_LIBS are always identical to
their CONFIG_ counterpart, and are useless.
In order to have consistent naming of config options in the makefiles,
these options are removed and the "CONFIG_ prefixed" variables are used.
Fixes: e25e4d7ef1 ("mk: shared libraries")
Fixes: 4d3d79e7a5 ("mk: combined library")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When a target is finished building, it reports just "Build complete".
When building multiple targets simultaneously, e.g.
make install T=x86_64-native-linuxapp-*
and one target fails, it's not always obvious which of the builds
failed. To help this, we add the actual target that is completed to the
"Build complete" message.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Adds cxgbe poll mode driver for DPDK under drivers/net/cxgbe directory.
This patch:
1. Adds the Makefile to compile cxgbe pmd.
2. Registers and initializes the cxgbe pmd driver.
Enable cxgbe PMD for compilation and linking with changes to:
1. config/common_linuxapp to add macros for cxgbe pmd.
2. drivers/net/Makefile to add cxgbe pmd to the compile list.
3. mk/rte.app.mk to add cxgbe pmd to link.
Update MAINTAINERS file to claim responsibility for the cxgbe PMD.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
[Thomas: add disabled config for bsdapp]
When we get the address of vring descriptor table in VHOST_SET_VRING_ADDR
message, will try to reallocate vhost device and virt queue to the same
numa node.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
On Fedora 22, the "ar" binary operates by default in deterministic mode,
making the "u" parameter irrelevant, and leading to warning messages
getting printed in the build output like below.
INSTALL-LIB librte_kvargs.a
ar: `u' modifier ignored since `D' is the default (see `U')
There are two options to remove these warnings:
* add in the "U" flag to make "ar" non-deterministic again
* remove the "u" flag to have all objects always updated
This patch takes the second approach. It also explicitly adds in the "D"
flag to make behaviour consistent across different distributions which
may have different defaults.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The combined lib was being created after building the lib root dir.
With the new directory hierarchy, it should be created after the
drivers root dir instead.
Fixes: 980ed498eb ("drivers: create new directory")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Li Wei <lw@cn.fujitsu.com>
Simplify the ifdefs in rte.app.mk to make the code more
readable and maintainable by introducing a internal
_LDLIBS-y variable to build up the LDLIBS variable.
The new internal variable _LDLIBS-y should not be
used outside of the rte.app.mk file.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
NO_AUTOLIBS is not required as it was not used or defined in the config files.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With GCC 4.4.7 from CentOS 6.5, the following errors arise:
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_dev_rx_queue_setup':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2509: error: missing initializer
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:2509: error: (near initialization for 'dev_info.driver_name')
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_set_rsc':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4072: error: missing initializer
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:4072: error: (near initialization for 'dev_info.driver_name')
lib/librte_pmd_ixgbe/ixgbe_rxtx.c: In function 'ixgbe_recv_pkts_lro_single_alloc':
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1479: error: 'next_rsc_entry' may be used uninitialized in this function
lib/librte_pmd_ixgbe/ixgbe_rxtx.c:1480: error: 'next_rxe' may be used uninitialized in this function
The "missing initializer" warning is a GCC bug which seems fixed in 4.7.
The same warning is thrown by clang.
The "may be used uninitialized" warning is another GCC bug which seems fixed in 4.7.
Fixes: 8eecb3295a ("ixgbe: add LRO support")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Null PMD was not found when using a statically linked application:
EAL: no driver found for eth_null1
EAL: failed to initialize eth_null1 device
Fixes: c743e50c47 ("null: new poll mode driver")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The virtio pmd is not restricted to uio anymore.
Fixes: da978dfdc4 ("virtio: use port IO to get PCI resource")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
In case of documents without image, an empty rm command can be seen if V=1.
Remove it to avoid disturbing debugging.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
The fuse library is needed for vhost-cuse as required in commit 28a1ccca41.
The case vhost-user was forgotten for application linking.
Fixes: 28a1ccca41 ("vhost: add build option for vhost-user")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Re-ordered the guide-pdf-% and guide-% rules to allow
the doc-guides-pdf target to build with make 3.81. It
builds unmodified with all later versions of make.
Fixes: ebf8050afd ("doc: add pdf output")
Reported-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add make system support for building PDF versions of
the guides. Requires Python Sphinx and TexLive Full.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Move the rte.extvars.mk to an internal directory and
update rte.vars.mk to find the file in the new location.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The '-fdirectives-only' flag doesn't exist in cpp of FreeBSD.
To remove expanding macros when parsing the config files won't
add any issue.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
40) as well as their virtual functions in SR-IOV context through IB Verbs
(libibverbs) and the dedicated user-space driver (libmlx4).
It is disabled by default due to dependencies on these libraries and only
supports Linux userland at the moment partly because /sys (sysfs) support is
required.
Also claim responsibility in the MAINTAINERS file.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
This app demonstrate usage of new rte_jobstats library.
It is basically the orginal l2fwd with following modifications to met
library requirements:
- main_loop() was split into two jobs: forward job and flush job. Logic
for those jobs is almost the same as in original application.
- stats is moved to rte_alarm callback to not introduce overhead of
printing.
- stats are expanded to show rte_jobstats statistics.
- added new parameter '-l' to automatic thousands separator.
Comparing original l2fwd and l2fwd-jobstats apps will show approach what
is needed to properly write own application with rte_jobstats
measurements.
New available statistics:
- Total and % of fwd and flush execution time
- management time - overhead of rte_timer + overhead of rte_jobstats
library
- Idle time and % of time spent waiting for fwd or flush to be ready to
execute.
- per job execution time and period.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Commit 71f0ab1849 broke compilation
on some versions of Debian and Ubuntu where gcc has been modified
to only emit MAJOR.MINOR part of the version from 'gcc -dumpversion'.
Drop the micro-version from gcc version comparisons to work around
this, it wasn't being used for anything anyway.
Fixes: 71f0ab1849 ("mk: rework gcc version detection to permit versions newer than 4.x")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Separately comparing major and minor versions becomes seriously clumsy
when with major version changes, convert the entire version string into
a numeric value (ie 4.6.0 becomes 460 and 5.0.0 becomes 500) and use
that for comparisons, eliminate unnecessary negations while at it.
This makes the comparisons simpler, more obvious and makes gcc 5.0
naturally recognized at least as capable as newest 4.x.
This three-digit scheme would run into trouble if gcc ever went to
two-digit version segments, but that hasn't happened in the last 10+
years so it seems like a safe assumption.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
x32 ABI provides benefits of x86-64 while using 32-bit pointers and
avoiding overhead of 64-bit pointers.
Test report: http://dpdk.org/ml/archives/dev/2015-February/012599.html
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Tested-by: Haifeng Tang <haifengx.tang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding new reorder unit test for the test app.
The command to run the unit test from the test shell is: reorder_autotest
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
1. Add init function to scan and initialize fm10k PF device.
2. Add implementation to register fm10k pmd PF driver.
3. Add 3 functions fm10k_dev_configure, fm10k_stats_get and
fm10k_stats_get.
4. Add fm10k.h to define macros and basic data structure.
5. Add fm10k_logs.h to control log message output.
6. Change config/common_bsdapp and config/common_linuxapp, add
macros to control fm10k pmd driver compile for linux and bsd.
7. Add Makefile.
8. Change lib/Makefile to add fm10k driver into compile list.
9. Change mk/rte.app.mk to add fm10k lib into link.
10. Add ABI version of librte_pmd_fm10k
Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
librte_vhost is not a plugin but a library, move it to proper section
to fix sample app build in shared, non-combined library setup.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This is all-important now that the libraries are versioned: DT_SONAME
presence instructs the runtime dynamic linker to load the shared object
by the versioned name in DT_SONAME instead of the the unversioned symlink
name used during build.
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
To differentiate libraries that break ABI, we add a library version number
suffix to the library, which must be incremented when a given libraries ABI is
broken. This patch enforces that addition, sets the initial abi soname
extension to 1 for each library and creates a symlink to the base SONAME so that
the test applications will link properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add initial pass header files to support symbol versioning.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
This reverts commit ca0038c009.
It forces clean target of application to have double-colon.
As stated in make doc:
"Double-colon rules are somewhat obscure and not often very useful"
And it's not needed since POSTCLEAN allow to add some clean targets.
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Reported-by: John Mcnamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The vhost library relies on libfuse, and thats included when we do a normal
shared object build, but when we specify combined libs, its gets left out. Add
it back in.
Reported-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
In some cases application may want to have additional rules
for clean. This can be handled by allowing the double colon
form of rule.
https://www.gnu.org/software/make/manual/html_node/Double_002dColon.html
Single colon and double colon rules for same target causes
an error.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch add Support for ICC 15.
ICC 15 changed inline-max-size and inline-max-total-size default values,
so for ICC 15 flags -no-inline-max-size -no-inline-max-total-size must be added.
additionally disable compile error for:
13368 - loop was not vectorized with "vector always assert"
15527 - loop was not vectorized: function call to fprintf cannot be vectorize
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When building static archives with CONFIG_COMBINED_LIBS, we still need to
specify --whole-archive to pull in all the proper constructors.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Lyn M <netinal7@gmail.com>
Tested-by: Lyn M <netinal7@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
