This commit defines MLX4_CQ_DB_CI_MASK which is used when updating
the consumer index of the completion queue instead of the hardcoded
0xffffff used until now.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When removing a device, the fail-safe checks that it is not within its
datapath before cleaning it.
When checking whether an Rx burst should be performed on a device, the
remove flag is not checked. Thus the port could still enter its datapath
and miss a removal round. Furthermore, there is a race between the
thread removing the device and the polling thread.
Check the remove flag before entering a sub-device Rx burst when in safe
mode. This check mitigates the aforementioned race condition.
Fixes: 72a57bfd9a0e ("net/failsafe: add fast burst functions")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The current name conflicts with the librte_pci naming convention.
Additionally, it is easier to use gdb when having prefixed even private
functions.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Fixes: cbc12b0a96f5 ("mk: do not generate LDLIBS from directory dependencies")
Fixes: b677d4c6d281 ("net/dpaa2: add API for event Rx adapter")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Some devices may not support or fail setting VLAN offload
configuration based on dynamic circumstances so the
vlan_offload_set_t vector is modified to return an int so
the caller can determine success or not.
rte_eth_dev_set_vlan_offload is updated to return the
value provided by the vector when called along with restoring
the original offload configs on failure.
Existing vlan_offload_set_t vectors are modified to return
an int. Majority of cases return 0 but a few that actually
can fail now return their failure codes.
Finally, a vlan_offload_set_t vector is added to virtio
to facilitate dynamically turning VLAN strip on or off.
Signed-off-by: David Harton <dharton@cisco.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Result of slaves link properties validation is not used when new slave
is added.
This patch uses the value of link_properties_valid() to determinate if
slave can be used in the bonding. If function fails, error is returned
preventing to add slave with invalid link properties.
Coverity issue: 158661
Fixes: deba8a2f8b0b ("net/bonding: fix link properties management")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
LIST macro are not safe when inside a LIST_FOREACH() a LIST_REMOVE() is
called to remove an entry, this behavior is undefined causing some entries
to disappear from the list.
Fixes: 6e78005a9b30 ("net/mlx5: add reference counter on DPDK Tx queues")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When copying VLAN tags from the RX descriptor to the vlan_tci field
in the mbuf header, igb_rxtx.c:eth_igb_recv_pkts() and
eth_igb_recv_scattered_pkts() both assume that the VLAN tag is always
little endian. While i350, i354 and /i350vf VLAN non-loopback
packets are stored little endian, VLAN tags in loopback packets (LB)
for those devices are big endian.
For i350, i354 and i350vf VLAN loopback packets, swap the tag when
copying from the RX descriptor to the mbuf header. This will ensure
that the mbuf vlan_tci is always little endian.
Signed-off-by: Roger Melton <rmelton@cisco.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Configuring UAR as IO-mapped makes maximum throughput decline by
noticeable amount. If UAR is configured as write-combining register,
a write memory barrier is needed on ringing a doorbell.
rte_wmb() is mostly effective when the size of a burst is comparatively
small. Revert the register back to write-combining and enforce a write
memory barrier instead, except for vectorized Tx burst routines.
Application can change it by setting MLX5_SHUT_UP_BF under its own
necessity.
Fixes: 9f9bebae5530 ("net/mlx5: don't map doorbell register to write combining")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Drop queue should also adjust their priority according the most specific
layer in the pattern they are matching to avoid dropping all the
traffic.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT are deprecated for a while.
As explained in [1], these flags were kept to let the applications and
PMDs move to the new flag. There is also a need to support Rx vlan
offload without vlan strip (at least for the ixgbe driver).
This patch renames the old flags for this feature, knowing that some
PMDs were using PKT_RX_VLAN_PKT and PKT_RX_QINQ_PKT to indicate that
the vlan tci has been saved in the mbuf structure.
It is likely that some PMDs do not set the proper flags when doing vlan
offload, and it would be worth making a pass on all of them.
Link: [1] http://dpdk.org/ml/archives/dev/2017-June/067712.html
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This flag is not necessary at the ether layer anymore.
Buses are able to advertise their hotplug support. The ether layer can
rely upon this capability instead of a special flag.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fixes: 75cd6fb1d901 ("net/bnxt: fix the association of a MACVLAN per VNIC")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
return value stored in "rc" but it has been overwritten before use.
Coverity issue: 147216
Fixes: 7a5b0874440e ("net/bnxt: support to add a VF MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are left shifting more bits than we should be doing.
This patch fixes that.
Coverity issue: 127546
Fixes: 778b759ba10e ("net/bnxt: add MAC address")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The case to handle redirect a flow to a VF is not handled.
This patch fixes it.
Fixes: 5ef3b79fdfe6 ("net/bnxt: support flow filter ops")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch removes some redundant code from bnxt_mq_rx_configure().
Fixes: 75cd6fb1d901 ("net/bnxt: fix the association of a MACVLAN per VNIC")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch simplifies logic for RSS queue creation.
1) Do not hardcode number of VNIC pools in case of RSS
2) Log a message if Number of queues is > RTE_ETHDEV_QUEUE_STAT_CNTRS
3) Move the check for allocation of l2_filter inside the for loop.
Fixes: 6133f207970c ("net/bnxt: add Rx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not setting the rx_offload capabilities. Fixing that.
Fixes: 0a6d2a720078 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We are not indicating VLAN insert capability of HW. Fixing it.
Fixes: 0a6d2a720078 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
when VSI is enabled with smaller number of queues, for example 1 or 6,
it will cause error.
64 is the max number of queues that can be used for RSS, but VSI might
be created with only few queues.
Fixes: 7cbecc2f742 ("net/i40e: support queue region set and flush")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For VF events indicating a change in the state of the switch manager,
the driver will restore the basic port configurations and then pass this
event to application so that the application can restore any additional
configurations if required.
In this way, once the switch manager restarts, the DPDK application can
resume its network.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For PF events indicating a change in the state of the switch manager,
the driver will restore the basic port configurations and then pass this
event to application so that the application can restore any additional
configurations if required.
In this way, once the switch manager restarts, the DPDK application can
resume its network.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As fm10k host interface is not directly connected to PHY, marking the
link status as UP doesn't mean a lot to the application.
So, this patch basically redefines the link status as the state of
switch manager: when switch manager is running, it's LINK_UP;
when switch manager goes down by calling the fmTerminate function,
status turns to LINK_DOWN.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Flows are added by priv_flow_create() in the associated list, adding them a
second time corrupts the list causing an infinite loop when parsing it.
Fixes: 4c3e9bcdd52e ("net/mlx5: support flow director")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
When VLAN is enabled in the Rx side, only packets matching this VLAN are
expected, this also includes the broadcast and all multicast packets.
Fixes: 272733b5ebfd ("net/mlx5: use flow to enable unicast traffic")
Fixes: 6a6b6828fe6a ("net/mlx5: use flow to enable all multi mode")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Marking a packet which will not be received by the NIC is useless, even
if this action remains possible, it blocks the creation of the flow
counter which embed a mark action to a drop queue to be created.
Fixes: 31ba9997f11a ("net/mlx5: fully convert a flow to verbs in validate")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Flow director drop action as not been brought back with the new
implementation on top of rte flow.
Fixes: 4c3e9bcdd52e ("net/mlx5: support flow director")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Fix the drop queue rule creation when the port is stopped.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Indirection table size must be in log to communicate with verbs when the
number of queue is not a power of two, the maximum indirection table
size is use, but not converted to log2. This makes a memory corruption.
Fixes: 4c7a0f5ff876 ("net/mlx5: make indirection tables shareable")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
When ports are stopped, the hash Rx queue should not be created.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The corrupted code allowed to create internal rule with no any target
queue in case the rule creation occurred before queues creation.
For example, when user calls rte_eth_dev_default_mac_addr_set after
probe and before dev_configure, mlx4 fails because the RSS queue number
was 0.
The fix prevents internal rules creation before queues creation based on
future creation before traffic start.
Fixes: 7d8675956f57 ("net/mlx4: add RSS support outside flow API")
Fixes: bdcad2f4843a ("net/mlx4: refactor internal flow rules")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Use more secure snprintf function instead of strncpy
to prevent memory access violation.
Fixes: 40d1324423a4 ("net/i40e: get ddp profile protocol info")
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
For complex packets use raw flow type with pre-constructed packet buffer
instead of creating a packet internally in PMD.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Considering the PMD supports only Ethernet transport, packet which
arrives without any packet type flags in the completion should be
marked with L2_ETHER flag.
Fixes: ea16068c0064 ("net/mlx5: fix L4 packet type support")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When SRIOV is active, the function ixgbe_dev_get_dcb_info( )
should return the DCB traffic class info of its own queues,
not including any DCB info of the queues of any its VF.
When VMDQ is active, all queues are belonged to the PF,
the function ixgbe_dev_get_dcb_info can return DCB info
of all queues.
Fixes: 89d6728c7837 ("ethdev: get DCB information")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
If multiple Rx queues and Rx Scatter are used and the MTU is
modified so that the number of mbufs per packet changes, packet
loss is possible.
The enic completion queue index was miscalculated leaving the
upper half of the queues uninitialized after an MTU change, possibly
leading to completions on those queues not getting processed.
Fixes: c3e09182bcd6 ("net/enic: support scatter Rx in MTU update")
Cc: stable@dpdk.org
Signed-off-by: John Daley <johndale@cisco.com>
Few bugs fixes in both configuration get and hash update where inputs
are not handled as expected by the ethdev layer.
RSS structure may not be totally usable, the PMD should try to take as
most information from it has it can when it is an hash update or it
should try to fill as most as possible in the configuration get.
This means that in the RSS configuration structure, the memory space for
the RSS hash key may not be present, but the PMD should consider the
hash field valid and process/set it.
Fixes: 29c1d8bb3e79 ("net/mlx5: handle a single RSS hash key for all protocols")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
