This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
thunderx pmd driver passes dev_info.max_rx_pktlen as
9200 (via rte_eth_dev_info_get()) to application.
But, when application tries to set MTU as
(9200 - sizeof(ethernet_header_t)) the operation fails
because of missing CRC and VLAN additions.
This patch fixes the following for thunderx pmd driver:
- Sets NIC_HW_MAX_FRS to 9216 (instead of 9200)
- Sets NIC_HW_MAX_MTU to 9190 (NIC_HW_MAX_FRS - ETH_HLEN
- ETHER_CRC_LEN - 2*VLAN_HLEN)
- Sets dev_info->max_rx_pkt_len to NIC_HW_MAX_MTU +
ETH_HLEN (instead of 9200)
- Allows rte_eth_dev_set_mtu() to pass if application
(like VPP) calls rte_eth_dev_set_mtu() before
rte_eth_dev_start() by putting appropriate check for
dev->data->dev_started
Fixes: 65d9804edc05 ("net/thunderx: support MTU configuration")
Cc: stable@dpdk.org
Signed-off-by: Nitin Saxena <nitin.saxena@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Flag MEMPOOL_F_NO_PHYS_CONTIG is renamed as MEMPOOL_F_NO_IOVA_CONTIG
to follow IO memory contiguous terminology.
MEMPOOL_F_NO_PHYS_CONTIG is kept for backward compatibility and
deprecated.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use new rte_eth_linkstatus_get/set helper functions to handle link
status update.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Note that the "nicvf" term has been replaced with "thunderx",
as the naming scheme defines that a PMD name should be the
same as the directory that it lives in: drivers/net/thunderx
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch removes all references to old-style offload API
replacing them with new offload flags.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
The pointer to the user parameter of the callback registration is
automatically pass to the callback function.
There is no point to allow changing this user parameter by a caller.
That's why this parameter is always set to NULL by PMDs and set only
in ethdev layer before calling the callback function.
The history is that the user parameter was initially used
by the callback implementation to pass some information
between the application and the driver:
c1ceaf3ad056 ("ethdev: add an argument to internal callback function")
Then a new parameter has been added to leave the user parameter
to its standard usage of context given at registration:
d6af1a13d7a1 ("ethdev: add return values to callback process API")
The NULL parameter in the internal callback processing function
is now removed. It makes clear that the callback parameter is user
managed and opaque from a DPDK point of view.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
There are 3 kind of link data in ethdev:
- capabilities (rte_eth_dev_info)
- configuration (rte_eth_conf)
- status (rte_eth_link)
A bit-field is used for capabilities (rte_eth_dev_info.speed_capa) and
configuration (rte_eth_conf.link_speeds).
Bits are defined in ETH_LINK_SPEED_*.
Some numerical (ETH_SPEED_NUM_*) and boolean (ETH_LINK_*) values
are used for the link status (rte_eth_link.*).
There was a mistake in the comment of rte_eth_link.link_autoneg,
suggesting ETH_LINK_SPEED_[AUTONEG/FIXED] which are 0/1,
instead of ETH_LINK_[AUTONEG/FIXED] which are 1/0.
The drivers are fixed to use ETH_LINK_[AUTONEG/FIXED].
Fixes: 82113036e4e5 ("ethdev: redesign link speed config")
Suggested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The stats_get dev op API doesn't include return value, so PMD cannot
return an error in case of failure at stats getting process time.
Since PCI devices can be removed and there is a time between the
physical removal to the RMV interrupt, the user may get invalid stats
without any indication.
This patch changes the stats_get API return value to be int instead of
void.
All the net PMDs stats_get dev ops are adjusted by this patch.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since the commit e84ad157b7bc ("pci: unmap resources if probe fails"),
EAL unmaps the PCI device if ethdev probe returns positive or
negative value.
nicvf thunderx PMD needs special treatment for Secondary queue set(SQS)
PCIe VF devices, where, it expects to not unmap or free the memory
without registering the ethdev subsystem.
Enable the same behavior by using RTE_PCI_DRV_KEEP_MAPPED_RES
PCI driver flag.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The thunderx PMD is sensitive to the layout of the mbuf on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113ef ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
With the mbuf rework, we now have 8 contiguous bytes to be
rearmed in the mbuf at 8B naturally aligned address.
Use single 8B write to avoid multiple 2B writes in Rx path.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Trying to assign more queues to stats struct break only from one loop
when the maximum size is reached. Outside loop iteration is continued.
This leads to access an array out of bounds.
Fixes: 21e3fb0050b9 ("net/thunderx: add final bits for secondary queue support")
Cc: stable@dpdk.org
Signed-off-by: Marcin Wilk <marcin.wilk@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Some DPDK applications/examples check link status on their
start. NICVF does not wait for the link, so those apps fail.
Wait up to 9 seconds for the link as other PMDs do in order
to fix those apps/examples.
Signed-off-by: Andriy Berestovskyy <andriy.berestovskyy@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
SIMPLEQ_* operations are not available in FreeBSD. Replacing
with equivalent STAILQ_* operations.
Fixes: f2546f8e51b8 ("net/thunderx/base: add functions to store qsets")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
nicvf HW expects the DMA address of the packet data to be
aligned with cache line size.
Packet data offset is a function of struct mbuf size,
mbuf private size and headroom. mbuf private size can
be changed from the application in pool creation, this
check detects HW alignment requirement constraint in pmd
start function.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
83xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_DISABLE_APAD capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Based on the packet type(IPv4 or IPv6), the nicvf HW aligns
L3 data to the 64bit memory address.
The alignment creates a hole in mbuf(between the
end of headroom and packet data start).
The new revision of the HW provides an option to disable
the L3 alignment feature and make mbuf layout looks
more like other NICs. For better application compatibility,
disabling l3 alignment feature on the hardware revisions it supports.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Summary:
- add secondary qset support in device stats
- add support for releasing mbufs from RBDR for >8 queues
- add support for releasing mbufs from RX queues for >8 queues
- support >8 queues in tx_queue_setup
- support >8 queues in rx_queue_setup
- support up to 96 queues per device (dev_info->max_rx_queues)
- add secondary qset support in rbdr_rte_mempool_get
- support >8 queues in multiprocess mode (do not reconfigure VFs)
- setup periodic alarm accordingly for type of VFs:
* primary VF - handle events on queues and link status
* secondary VF - handle events on queues
- initialize hardware capabilities in secondary qsets
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
In case of the multiprocess mode a shared nicvf struct between processes
cannot point with the eth_dev pointer to master device, therefore remove it
along with references to it refactoring the code where needed.
This change fixes multiprocess issues detected in stats.
Fixes: 7413feee662d ("net/thunderx: add device start/stop and close")
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
81xx NIC subsystem differs in new PCI subsystem_device_id and
NICVF_CAP_CQE_RX2 capability.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Certain thunderx SoC pass has additional optional word
in Rx descriptor to hold tunneling extension info.
Based on this capability, the location where packet pointer
address stored in Rx descriptor will vary.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
thunderx pmd driver needs to support multiple SoC
variants in ThunderX family.
Remove generic pass references from driver as each SoC
can have same pass number.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
