Global filter configuration request was supported by net/i40e
driver only to configure GRE key length.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of HASH filter RTE flow API should be used.
Preserve RTE_ETH_FILTER_HASH since it is used in drivers
internally in RTE flow API support.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of TUNNEL filter RTE flow API should be used.
Move corresponding defines and helper structure to ethdev
driver interface since it is still used by drivers internally.
Preserve RTE_ETH_FILTER_TUNNEL because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of N-tuple filter RTE flow API should be used.
Preserve struct rte_eth_ntuple_filter in ethdev API since
the structure and related defines are used in flow classify
library and a number of drivers.
Preserve RTE_ETH_FILTER_NTUPLE because of usage in drivers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of SYN filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_SYN because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
net/e1000 driver is the only user of the struct rte_eth_flex_filter
and helper defines. Move it to the driver and use igb_ prefix
instead of rte_eth_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of EtherType filter RTE flow API should be used.
Move corresponding definitions to ethdev internal driver API
since it is used by drivers internally.
Preserve RTE_ETH_FILTER_ETHERTYPE because of it as well.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
net/i40e driver is the only user of the enum rte_mac_filter_type.
Move the define to the driver and use i40e_ prefix instead of rte_.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Instead of MACVLAN filter RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch initializes a local parameter in async data path to avoid
compiler warnings.
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
gpa_to_hpa() function almost always fails due to the wrong setup of
the binary tree search key. Since there has already been a similar
function gpa_to_first_hpa() available in the vhost, instead of fixing
the issue in its original logic, gpa_to_hpa() function is rewritten to
be a wrapper of the gpa_to_first_hpa() to avoid code redundancy.
Fixes: e246896178 ("vhost: get guest/host physical address mappings")
Fixes: faa9867c4d ("vhost: use binary search in address conversion")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The definitions of RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP
and RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP were inserted
before the last comment of Tx offloads.
It is moved in a better place,
with comments moved to be before the definition.
A group comment is added to better describe device capabilities.
Fixes: cac923cfea ("ethdev: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When a flow API RSS rule is issued in testpmd, device RSS key is changed
unexpectedly, device RSS key is changed to the testpmd default RSS key.
Consider the following usage with testpmd:
1. first, startup testpmd:
testpmd> show port 0 rss-hash key
RSS functions: all ipv4-frag ipv4-other ipv6-frag ipv6-other ip
RSS key: 6D5A56DA255B0EC24167253D43A38FB0D0CA2BCBAE7B30B477CB2DA38030F
20C6A42B73BBEAC01FA
2. create a rss rule
testpmd> flow create 0 ingress pattern eth / ipv4 / udp / end \
actions rss types ipv4-udp end queues end / end
3. show rss-hash key
testpmd> show port 0 rss-hash key
RSS functions: all ipv4-udp udp
RSS key: 74657374706D6427732064656661756C74205253532068617368206B65792
C206F76657272696465
This is because testpmd always sends a key with the RSS rule,
if user provides a key as part of the rule that key is used, if user
doesn't provide a key, testpmd default key is sent to the PMDs, which is
causing device programmed RSS key to be changed.
There was a previous attempt to fix the same issue [1], but it has been
reverted back [2] because of the crash when 'key_len' is provided
without 'key'.
This patch follows the same approach with the initial fix [1] but also
addresses the crash.
After change, testpmd RSS key is 'NULL' by default, if user provides a
key as part of rule it is used, if not no key is sent to the PMDs at all
[1]
Commit a4391f8bae ("app/testpmd: set default RSS key as null")
[2]
Commit f3698c3d09 ("app/testpmd: revert setting default RSS")
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
By design, async enqueue API should return directly if async device
is not registered. This patch removes the corrupted implementation of
the enqueue fallback from async mode to sync mode.
Fixes: cd6760da10 ("vhost: introduce async enqueue for split ring")
Cc: stable@dpdk.org
Signed-off-by: Patrick Fu <patrick.fu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch checks whether the virtqueue metadata pointer
is valid before dereferencing it. It is not considered
a fix as earlier patch ensures there are no holes in the
array of virtqueue metadata pointers.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure no out-of-bound accesses happen.
Fixes: 9eed6bfd2e ("vhost: allow to enable or disable features")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.
Fixes: 4d891f77dd ("vhost: add APIs to get inflight ring")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure no out-of-bound accesses happen.
Fixes: bd2e0c3fe5 ("vhost: add APIs for live migration")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.
Fixes: 9eed6bfd2e ("vhost: allow to enable or disable features")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch validates the queue index parameter, in order
to ensure neither out-of-bound accesses nor NULL pointer
dereferencing happen.
Fixes: a67f286a65 ("vhost: export queue free entries")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The Vhost-user backend implementation assumes there will be
no holes in the device's array of virtqueues metadata
pointers.
It can happen though, and would cause segmentation faults,
memory leaks or undefined behaviour.
This patch keep the assumption that there is no holes in this
array, and allocate all uninitialized virtqueues metadata up
to requested index.
Fixes: 160cbc815b ("vhost: remove a hack on queue allocation")
Cc: stable@dpdk.org
Suggested-by: Adrian Moreno <amorenoz@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
If an error occurred when allocating memory for metrics or names,
the function returned without freeing allocated memory. This is now
fixed to avoid the resource leak in the case that either metrics or
names had been successfully allocated memory.
Coverity issue: 362053
Fixes: c5b7197f66 ("telemetry: move some functions to metrics library")
Cc: stable@dpdk.org
Reported-by: Gaurav Singh <gaurav1086@gmail.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Currently, the intrinsics documentation refers to `rte_cpu_get_features`
as a check for whether these intrinsics are supported at runtime. This
is incorrect, because actually the user should use the
`rte_cpu_get_intrinsics_support` API to do said check. Fix the typo.
Fixes: 1280214212 ("eal: add intrinsics support check infrastructure")
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Liang Ma <liang.j.ma@intel.com>
rte_gso_segment decreased refcnt of pkt by one, but
it is wrong if pkt is external mbuf, pkt won't be
freed because of incorrect refcnt, the result is
application can't allocate mbuf from mempool because
mbufs in mempool are run out of.
One correct way is application should call
rte_pktmbuf_free after calling rte_gso_segment to free
pkt explicitly. rte_gso_segment must not handle it, this
should be responsibility of application.
This commit changed rte_gso_segment in functional behavior
and return value, so the application must take appropriate
actions according to return values, "ret < 0" means it
should free and drop 'pkt', "ret == 0" means 'pkt' isn't
GSOed but 'pkt' can be transmitted as a normal packet,
"ret > 0" means 'pkt' has been GSOed into two or multiple
segments, it should use "pkts_out" to transmit these
segments. The application must free 'pkt' after call
rte_gso_segment when return value isn't equal to 0.
Fixes: 119583797b ("gso: support TCP/IPv4 GSO")
Cc: stable@dpdk.org
Signed-off-by: Yi Yang <yangyi01@inspur.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Windows alarms are both armed and executed from the interrupt thread.
rte_eal_alarm_set() dispatched alarm-arming code to that thread and
waited for its completion via a spinlock. However, if called from alarm
callback (i.e. from the interrupt thread), this caused a deadlock,
because arming could not be run until its dispatcher exits, but it could
only exit after it finished waiting for arming to complete.
Call arming code directly when running in the interrupt thread.
Fixes: f4cbdbc7fb ("eal/windows: implement alarm API")
Reported-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Currently, since there is no runtime directory set, the code tries to
create a file in C:\ which is only writable with administrator
privileges. As a result, if the user is not admin, the application will
fail.
So, forcing no_shconf to 1 to prevent the code having to create files in
the runtime directory.
Suggested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Previously, the Tx timestamp field and flag were registered in testpmd,
as described in mlx5 guide.
For consistency between Rx and Tx timestamps,
managing mbuf registrations inside the driver, as properly documented,
is a simpler expectation.
The only driver to support this feature (mlx5) is updated
as well as the testpmd application.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mbuf_dyn_tx_timestamp_register()
can be used to register the required field and flag.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The offload flag DEV_RX_OFFLOAD_TIMESTAMP had no documentation.
After switching to dynamic mbuf flag and field,
it becomes even more important to explicit the feature behaviour.
A doxygen comment for the timesync API was mentioning
the deprecated timestamp field, so it is also updated.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The mbuf timestamp is moved to a dynamic field
in order to allow removal of the deprecated static field.
The related mbuf flag is also replaced with the dynamic one.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is already a dynamic field for timestamp,
used only for Tx scheduling with the dedicated Tx offload flag.
The same field can be used for Rx timestamp filled by drivers.
A new dynamic flag is defined for Rx usage.
A new function wraps the registration of both field and Rx flag.
The type rte_mbuf_timestamp_t is defined for the API users.
After migrating all Rx timestamp usages, it will be possible
to remove the deprecated timestamp field.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This a revert of the commit 569758758d ("eventdev: add Rx timestamp").
If the Rx timestamp is not configured on the ethdev port,
there is no reason to set one.
Also the accuracy of the timestamp was bad because set at a late stage.
Anyway there is no trace of the usage of this timestamp.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rather than have drivers check for this, let's ensure the passed FILE *
is not NULL.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
This patch increases the immediate operand size from 32 to 64 bits.
Signed-off-by: Venkata Suresh Kumar P <venkata.suresh.kumar.p@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The eventdev drivers have been hacking the deprecated field seqn for
internal test usage.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
The reorder library used sequence numbers stored in the deprecated field
seqn.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The device-specific metadata was stored in the deprecated field udata64.
It is moved to a dynamic mbuf field in order to allow removal of udata64.
The name rte_security_dynfield is not very descriptive
but it should be replaced later by separate fields for each type of data
that drivers pass to the upper layer.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The node_mbuf_priv1 was stored in the deprecated mbuf field udata64.
It is moved to a dynamic field in order to allow removal of udata64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Replace "in a in PMD" with "in a PMD".
Fixes: 4958ca3a44 ("mbuf: support dynamic fields and flags")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Since the kernel module is not part of EAL anymore,
there is no need to have the common KNI header file in EAL.
The file rte_kni_common.h is moved to librte_kni.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The ctf metadata is written to the metadata file without any check for
length, so this string must be null terminated.
Fixes: f1a099f5b1 ("trace: create CTF TDSL metadata in memory")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
Rework registration so that it uses dynamic allocations and has no size
limit.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
CTF event description is currently built by appending all fields in a
single string at trace point registration.
When dumping the metadata, this string is split again and inspected to
fixup reserved keywords and special tokens like "." or "->".
Move this fixup per field at trace point registration time so that there
is no need for inspecting / string parsing when dumping metadata.
Use dynamic allocations to remove an artificial size limit on the CTF
event description manipulations.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Sunil Kumar Kori <skori@mavell.com>
Currently, it is not possible to check support for intrinsics that
are platform-specific, cannot be abstracted in a generic way, or do not
have support on all architectures. The CPUID flags can be used to some
extent, but they are only defined for their platform, while intrinsics
will be available to all code as they are in generic headers.
This patch introduces infrastructure to check support for certain
platform-specific intrinsics, and adds support for checking support for
IA power management-related intrinsics for UMWAIT/UMONITOR and TPAUSE.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Add two new power management intrinsics, and provide an implementation
in eal/x86 based on UMONITOR/UMWAIT instructions. The instructions
are implemented as raw byte opcodes because there is not yet widespread
compiler support for these instructions.
The power management instructions provide an architecture-specific
function to either wait until a specified TSC timestamp is reached, or
optionally wait until either a TSC timestamp is reached or a memory
location is written to. The monitor function also provides an optional
comparison, to avoid sleeping when the expected write has already
happened, and no more writes are expected.
For more details, please refer to Intel(R) 64 and IA-32 Architectures
Software Developer's Manual, Volume 2.
Signed-off-by: Liang Ma <liang.j.ma@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
