Cmdline unit test calls several functions that use snprintf,
with NULL pointer as the destination buffer. This patch
eliminates these NULL pointer tests.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
There were 2 typos since these commits (in 1.6.0 releases):
21a7f4e264 fix build without librte_cmdline
cac6d08c8b replace --use-device option by --pci-whitelist and --vdev
In makefiles, the build options are prefixed with CONFIG_RTE_
but in .c file, it is only RTE_.
These typos were disabling cmdline unit tests and test of "--vdev eth_ring" option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Including:
- code to generate packet bursts for testing rx and tx
functionality of bonded device
- virtual/stubbed out ethdev for use as slave ethdev in testing
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
We might want to only change a parameter rather than have to set all possible
parameters, so add "partial" commands.
These commands only change the specified parameter.
To avoid duplicating code all around, a unique parser is kept. This parser uses
the .data parameter to select the right behavior.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move parser after declarations to prepare rework in next commit.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Following commit 2d95b84aaacb3d2d0bd70367c0530d15e0cbb14e, rte_eth_fc_conf
struct contains a autoneg field that must be set by callers.
Add this parameter to testpmd.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The function rte_snprintf serves no useful purpose. It is the
same as snprintf() for all valid inputs. Deprecate it and
replace all uses in current code.
Leave the tests for the deprecated function in place.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Mark the rte_log, cmdline_printf and rte_snprintf functions as
being printf-style functions. This causes compilation errors
due to mis-matched parameter types, so the parameter types are
fixed where appropriate.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fix typos and false assumptions in malloc unit tests.
Without enhancements to lib rte_malloc, malloc autotest fails every
second (2nd) run. With enhancements, malloc autotest fails in
function test_multi_alloc_statistics, because we compare the wrong
sets of statistics.
Signed-off-by: Robert Sanford <rsanford2@gmail.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
We usually use testpmd fwd to demonstrate IO forwarding throughput.
For best throughput, it has to assign special parameters to testpmd.
To make it easier to run, now set it as defalut value.
Such parameters are MBUF Mempool Cache and RX/TX threshold registers.
MBCACHE: 250
RX threshold registers: pthresh=8 hthresh=8 wthresh=0
TX threshold registers: pthresh=32 hthresh=0 wthresh=0
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
The vpmd RX don't accept burst size less than 32.
As vPMD is set =y by default, while default testpmd burst size is 16.
Which will cause RX nothing if not assign burst size correctly.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Liu <yong.liu@intel.com>
Tested-by: Zhaochen Zhan <zhaochen.zhan@intel.com>
i40e supports 16 and 32 bytes RX descriptors which can be configured.
It needs to check the driver type and the configuration to determine
if 16 or 32 bytes RX descriptors is being used, for reading and
displaying the different sizes of RX descriptors.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Simplifiy the logic in the error checking branch. Rather than having a
single error branch which checked both RX and TX conditions and made
extensive use of the ? operator, move the error checking explicitly into
the RX and TX individual branches.
The original code caused compilation issues when attempting compilation
with clang on BSD, due to type mismatches. This change fixes the issues
while making the code easier to read and maintain overall.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A number of commandline entries in the testpmd commandline were actually
defined as being string type values when in fact they were being
initialized as integer types. Correct this by specifying them as integer
type values in the type definition.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Take avantage of the .set_mtu ethdev function and make it possible to configure
MTU on devices using testpmd.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As i40e PMD need to know the L3 packet type for TX checksum offloading,
the packet type has been added in rte_mbuf offload flags.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
i40e supports both 16 and 32 bytes RX descriptors, while ixgbe and
igb support 16 bytes size only. Code changes have been made in
test-pmd to support both 16 and 32 bytes RX descriptors according
to the configuration in config files.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
To support i40e, new ops has been added to support setting
port based vlan insertion.
New command 'tx_vlan set pvid port_id vlan_id (on|off)'
has been added in testpmd to configure port based vlan insertion.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
- i40e RSS flags have been added (and enlarged to 64-bit)
- A new configuration of 'uint8_t rss_key_len' has been added in
'struct rte_eth_rss_conf' to support different length of RSS keys.
- In each PMD, only the supported flags are masked.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Split input error stats to have a better understanding of why packets
have been dropped.
Keep ierrors field untouched for backward compatibility.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Unit tests for Packet Framework libraries.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This application is purposefully built to benchmark the performance
of the Intel DPDK Packet Framework toolbox.
It uses 3 CPU cores connected in a chain through SW rings
(NICs --> Core A --> Core B --> Core C --> NICs)
1. Core A: reads packets from NIC ports and writes them to SW queues;
2. Core B: instantiates a Packet Framework pipeline that uses ring reader
input ports, a table whose type is selected trhough command line arguments
(--none, --stub, --lpm, --acl, --hash[-spec]-KEYSZ-TYPE, with KEYSZ as
8, 16 or 32 bytes and TYPE as ext (Extendible bucket) or lru (LRU))
and ring writers output ports;
3. Core C: reads packets from SW rings and writes them to NIC ports.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
[Thomas: remove dedicated build option]
Unlike igb_uio, VFIO interrupt type is not set by kernel module
parameters but is set up via ioctl() calls at runtime. This warrants
a new EAL command-line parameter. It will have no effect if VFIO is
not compiled, but will set VFIO interrupt type to either "legacy", "msi"
or "msix" if VFIO support is compiled. Note that VFIO initialization
will fail if the interrupt type selected is not supported by the system.
If the interrupt type parameter wasn't specified, VFIO will try all
interrupt types (starting with MSI-X).
In unit tests, we don't know if VFIO is compiled (eal_vfio.h header is
internal to Linuxapp EAL), so we check this flag regardless.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Rename the RTE_PCI_DRV_NEED_IGB_UIO to be more generic.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Usage example and main test application for the ACL library.
Provides IPv4/IPv6 5-tuple classification.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
[Thomas: some code-style changes]
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Add a set of unit tests and some basic performance test for the
distributor library. These tests cover all the major functionality of
the library on both distributor and worker sides.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Allows to lookup four IP addresses in an LPM table.
Uses SSE instrincts.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
This patch adds commands to test the functionality of setting link up and down.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This commit removes trailing whitespace from lines in files. Almost all
files are affected, as the BSD license copyright header had trailing
whitespace on 4 lines in it [hence the number of files reporting 8 lines
changed in the diffstat].
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove spaces before tabs in libs]
[Thomas: remove more trailing spaces in non-C files]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add the command "port config X rss-hash-key key" in the 'testpmd'
application to configure the RSS hash key used to compute the RSS
hash of input [IP] packets received on port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
1) Add a new function "rss_hash_conf_get" in the PMD API to retrieve the
current configuration of the RSS functions and/or of the RSS key used
by a NIC to compute the RSS hash of input packets.
The new function uses the existing data structure "rte_eth_rss_conf" for
returning the RSS hash configuration.
2) Add the ixgbe-specific function "ixgbe_dev_rss_hash_conf_get" and the
igb-specific function "eth_igb_rss_hash_conf_get" to retrieve the RSS
hash configuration of ixgbe and igb controllers respectively.
3) Add the command "show port X rss-hash [key]" in the testpmd application
to display the RSS hash configuration of port X.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The function cmd_config_rss_parsed() associated with the command
"port config rss all" required to first stop all ports, in order to
then entirely re-configure all ports with the new RSS hash computation
parameters.
Use now the new function rte_eth_dev_rss_hash_conf_update() that dynamically
only changes the RSS hash computation parameters of a port, without needing
to previously stop the port.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The existing rte scheduler can only be safely configured once per port
because a memory zone has a fixed size once it is created and can never
be freed or change in size.
This patch changes the scheduler to use rte_malloc instead. This allows
for a port to be reconfigured by doing rte_sched_port_free followed
rte_sched_port_config.
The patch also removes the now unused name parameter from the
port parameters structure.
Signed-off-by: Stephen Hemminger <shemming@brocade.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Now that we've converted all the pmds in dpdk to use the driver registration
macro, rte_pmd_init_all has become empty. As theres no reason to keep it around
anymore, just remove it and fix up all the eample callers.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Convert the ring driver to use the PMD_REGISTER_DRIVER macro and fix up the
Makefile so that its linkage is only done if we are building static libraries.
This means that the test applications now have no reference to the ring library
when building DSO's and must specify its use on the command line with the -d
option. Static linking will still initalize the driver automatically.
Note that the ring driver was also written in such a way that it violated some
general layering principles, several functions were contained in the pmd which
were being called by example from the test application in the app/test
directory. Specifically it was calling eth_ring_pair_attach,
eth_ring_pair_create and rte_eth_ring_devinit, which should only be called
internally to the dpdk core library. To correct this I've removed those
functions, and instead allowed them to be called indirectly at initalization
time using the vdev command line argument key nodeaction=<name>:<node>:<action>
where action is one of ATTACH or CREATE. I've tested out the functionality of
the command line with the testpmd utility, with success, and have removed the
called functions from the test utility. This will affect how the test utility
is invoked (the -d and --vdev option will need to be specified on the command
line now), but honestly, given the way it was coded, I think the testing of the
ring pmd was not the best example of how to code with dpdk to begin with. I
have also left the two layer violating functions in place, so as not to break
existing applications, but added deprecation warnings to them so that apps can
migrate off them.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It makes no sense to inline string functions, in fact snprintf
can't be inlined because the function supports variable number of
arguments.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: update includes]
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The DPDK dump functions are useful for remote debugging of an
applications. But when application runs as a daemon, stdout
is typically routed to /dev/null.
Instead change all these functions to take a stdio FILE * handle
instead. An application can then use open_memstream() to capture
the output.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: fix quota_watermark example]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When starting/stopping ports, a link status check on all available ports is
done. This can be annoying when cables are not plugged at the time.
Default behavior is untouched.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Display port number and MAC address at start up.
It is useful when configuring a packet generator.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new specific packet processing engine in the "testpmd" application that
only replies to ARP requests and to ICMP echo requests.
For this purpose, a new "icmpecho" forwarding mode is provided that can be
dynamically selected with the following testpmd command:
set fwd icmpecho
before starting the receipt of packets on the selected ports.
Then, the "icmpecho" engine performs the following actions on all received
packets:
- replies to a received ARP request by sending back on the RX port a ARP
reply with a "sender hardware address" field containing the MAC address
of the RX port,
- replies to a ICMP echo request by sending back on the RX port a ICMP echo
reply, swapping the IP source and the IP destination address in the IP
header,
- otherwise, simply drops the received packet.
When replying to a received packet that was encapsulated into a VLAN tunnel,
the reply is sent back with the same VLAN identifier.
By default, the testpmd configures VLAN header stripping RX option on each
port.
This option is not managed by the icmpecho engine which won't detect
packets that were encapsulated into a VLAN.
To address this issue, the VLAN header stripping option must be previously
switched off with the following testpmd command:
vlan set strip off
When the "verbose" mode has been set with the testpmd command
"set verbose 1", the "icmpecho" engine displays informations about each
received packet.
The "icmpecho" forwarding engine can also be used to simply check port
connectivity at the hardware level (check that cables are well-plugged)
and at the software level (receipt of VLAN packets, for instance).
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
We allow a new --txpkts command-line parameter to configure segment sizes when
in txonly or flowgen forwarding modes.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
[Thomas: add usage help]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit adds a multi-flow traffic generator forwarding engine. In effect,
this forwarding mode functions very similar to the txonly mode, with the
difference that it generates multiple L4 flows.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This commit adds a new forwarding mode, in which the source and destination
MAC addresses of packets are swapped before forwarding according to the
port-topology in effect. This has been designed for operation primarily with
--port-topology=loopback.
Signed-off-by: Cyril Chemparathy <cchemparathy@tilera.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Having a function to list forwarding engines helps to show them
in cli help and in parameters usage witout duplicating code.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ivan Boule <ivan.boule@6wind.com>
