If flow redirect failed, the spinlock will not be unlocked.
This patch fixes it.
Fixes: bc9201388d ("net/ice: support flow redirect")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The Timestamp Overlay feature is available only in 32B Flex Descriptors.
This patch adds compile option when in 16B Flex Descriptors.
Fixes: 953e74e6b7 ("net/ice: enable Rx timestamp on flex descriptor")
Fixes: 646dcbe6c7 ("net/ice: support IEEE 1588 PTP")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Null-checking "p" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check. Thus correct
the code lines and remove the redundant line.
Fixes: c84f8aa210 ("net/ice/base: add parser runtime skeleton")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Firmware 8.4+ will return I40E_AQ_RC_ENOENT when try to delete
non-existent MAC/VLAN addresses from the HW filtering, this should
not be considered as an Admin Queue error. But in i40e_asq_send_command,
it will return I40E_ERR_ADMIN_QUEUE_ERROR if the return value of Admin
Queue command processed by Firmware is not I40E_AQ_RC_OK or
I40E_AQ_RC_EBUSY.
Use i40e_aq_remove_macvlan_v2 instead so that we can get the
corresponding Admin Queue status, and not report as an error in DPDK
when Firmware return I40E_AQ_RC_ENOENT, and this also not break with an
old firmware.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Adjust the code line order of the parser runtime reset, since the
struct rt->psr is used in function _rt_flag_set before assignment.
Fixes: c84f8aa210 ("net/ice/base: add parser runtime skeleton")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.
Fixes: f30e69b41f ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
RTE IPv4 header definition combines the `version' and `ihl' fields
into a single structure member.
This patch introduces dedicated structure members for both `version'
and `ihl' IPv4 fields. Separated header fields definitions allow to
create simplified code to match on the IHL value in a flow rule.
The original `version_ihl' structure member is kept for backward
compatibility.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
IPv4 header encodes fragment information into 16 bits field.
3 bits hold flags and remaining 13 bits are for fragment offset.
13 bits bit-field cannot be defined both for big and little endian
systems.
The patch removes IPv4 fragments union announce.
Fixes: f7383e7c7e ("net: announce changes in IPv4 header access")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Parse inner L2 length to set correct packet type, and ensure that
hardware can compute the checksum successfully.
Fixes: b950203be7 ("net/txgbe: support VXLAN-GPE")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
It's necessary to set 1 on TXGBE_PX_INTA register to get interrupts
normally, when legacy interrupt mode is used.
Fixes: 2fc745e6b6 ("net/txgbe: add interrupt operation")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Add 'display-xstats' option for using in accompanying with Rx/Tx statistics
(i.e. 'stats-period' option or 'show port stats' interactive command) to
display specified list of extended statistics.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update immediate value/pointer source operand support
for modify field RTE Flow action:
- source operand data can be presented by byte buffer
(instead of former uint64_t) or by pointer
- no host byte ordering is assumed anymore for immediate
data buffer (not uint64_t anymore)
- no immediate value offset is expected (the source
subfield is located at the same offset as in destination)
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The hexadecimal string parser does not check the target
field buffer size, buffer overflow happens and might
cause the application failure (segmentation fault
is observed usually).
Fixes: 169a9fed1f ("app/testpmd: fix hex string parser support for flow API")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The testpmd flow create command updates provided:
- modify field action supports the updated actions
- pointer type added for action source field
- pointer and value source field takes hex string
instead of unsigned int in host endianness
There are some examples of flow with update modified
field action:
1. IPv6 destination address bytes 4-7 assignment:
0000::1111 - > 0000:xxxx:4455:6677::1111
flow create 0 egress group 1
pattern eth / ipv6 dst is 0000::1111 / udp / end
actions modify_field op set
dst_type ipv6_dst
dst_offset 32
src_type value
src_value 0011223344556677
width 32 / end
2. Copy second byte of IPv4 destination address to the
third byte of source address:
10.0.118.4 -> 192.168.100.1
10.0.168.4 -> 192.168.100.1
flow create 0 egress group 1
pattern eth / ipv4 / udp / end
actions modify_field op set
dst_type ipv4_src
dst_offset 16
src_type ipv4_dst
src_offset 8
width 8 / end
3. Assign METADATA value with 11223344 value from the
hex string in the linear buffer. Please note, the value
definition should follow host-endian, example is given
for x86 (little-endian):
flow create 0 egress group 1
pattern eth / ipv4 / end
actions modify_field op set
dst_type meta
src_type pointer
src_ptr 44332211
width 32 / end
4. Assign destination MAC with EA:11:0B:AD:0B:ED value:
flow create 0 egress group 1
pattern eth / end
actions modify_field op set
dst_type mac_dst
src_type value
src_value EA110BAD0BED
width 48 / end
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
EXPERIMENTAL tag was missed in rte_flow_action_modify_data
structure description.
Fixes: 73b68f4c54 ("ethdev: introduce generic modify flow action")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The generic modify field flow action introduced in [1] has
some issues related to the immediate source operand:
- immediate source can be presented either as an unsigned
64-bit integer or pointer to data pattern in memory.
There was no explicit pointer field defined in the union.
- the byte ordering for 64-bit integer was not specified.
Many fields have shorter lengths and byte ordering
is crucial.
- how the bit offset is applied to the immediate source
field was not defined and documented.
- 64-bit integer size is not enough to provide IPv6
addresses.
In order to cover the issues and exclude any ambiguities
the following is done:
- introduce the explicit pointer field
in rte_flow_action_modify_data structure
- replace the 64-bit unsigned integer with 16-byte array
- update the modify field flow action documentation
Appropriate deprecation notice has been removed.
[1] commit 73b68f4c54 ("ethdev: introduce generic modify flow action")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Not all DPDK ports in a given switching domain may have the
privilege to manage "transfer" flows. Add an API to find a
port with sufficient privileges by any port in the domain.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Setting 'RTE_LIBRTE_BNXT_TRUFLOW_DEBUG' macro cause build error,
removing it.
Also with meson build system compile time debug macros should be
documented in driver documentation, since there is no other way to
figure out their existence.
Fixes: ad9eed0248 ("net/bnxt: support flow template for Thor")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reported by "gcc (GCC) 12.0.0 20211003 (experimental)":
./drivers/net/softnic/rte_eth_softnic_cli.c:
In function ‘tmgr_hierarchy_default’:
./drivers/net/softnic/rte_eth_softnic_cli.c:634:73:
error: the comparison will always evaluate as ‘true’ for the
address of ‘tc_valid’ will never be NULL [-Werror=address]
634 | (¶ms->shared_shaper_id.tc_valid[0]) ? 1 : 0,
| ^
Fixing it by removing useless check.
Fixes: 1af2dc5111 ("net/softnic: add command for default tmgr hierarchy")
Fixes: 5eb676d74f ("net/softnic: add config flexibility to TM")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add support for item PORT_REPRESENTOR which should
be used instead of ambiguous item PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Action PORT_ID implementation assumes ingress only. Its semantics
suggests that support for equal action PORT_REPRESENTOR be added.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Semantics of the existing support for action PORT_ID suggests
that support for equal action REPRESENTED_PORT be implemented.
Helper functions keep port_id suffix since action
MLX5_FLOW_ACTION_PORT_ID is still used internally.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for items PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for item PORT_ID.
The use of item PORT_ID depends on the specified direction attribute.
Items PORT_REPRESENTOR and REPRESENTED_PORT, in turn, define traffic
direction themselves. The former matches traffic from the driver's
vNIC. The latter matches packets from either a v-port (network) or
a VF's vNIC (if the driver's port is a VF representor).
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Attributes "ingress" and "egress" can only apply unambiguosly
to non-"transfer" flows. In "transfer" flows, the standpoint
is effectively shifted to the embedded switch. There can be
many different endpoints connected to the switch, so the
use of "ingress" / "egress" does not shed light on which
endpoints precisely can be considered as traffic sources.
Add relevant deprecation notices and suggest the use of precise
traffic source items (PORT_REPRESENTOR and REPRESENTED_PORT).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
PF, VF and PHY_PORT require that applications have extra
knowledge of the underlying NIC and thus are hard to use.
Also, the corresponding items depend on the direction
attribute (ingress / egress), which complicates their
use in applications and interpretation in PMDs.
The concept of PORT_ID is ambiguous as it doesn't say whether
the port in question is an ethdev or the represented entity.
Items and actions PORT_REPRESENTOR, REPRESENTED_PORT
should be used instead.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to the
entity represented by the given ethdev, at embedded switch level.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to
the given ethdev (to the application), at embedded switch level.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic entering the
embedded switch from the entity represented by the given ethdev.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic
entering the embedded switch from the given ethdev.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Move rte_eth_dev, rte_eth_dev_data, rte_eth_rxtx_callback and related
data into private header (ethdev_driver.h).
Few minor changes to keep DPDK building after that.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Introduce rte_eth_macaddrs_get() to allow user to retrieve all ethernet
addresses assigned to given port.
Change testpmd to use this new function and avoid referencing directly
rte_eth_devices[].
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Rework fast-path ethdev functions to use rte_eth_fp_ops[].
While it is an API/ABI breakage, this change is intended to be
transparent for both users (no changes in user app is required) and
PMD developers (no changes in PMD is required).
One extra thing to note - RX/TX callback invocation will cause extra
function call with these changes. That might cause some insignificant
slowdown for code-path where RX/TX callbacks are heavily involved.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Copy public function pointers (rx_pkt_burst(), etc.) and related
pointers to internal data from rte_eth_dev structure into a
separate flat array. That array will remain in a public header.
The intention here is to make rte_eth_dev and related structures internal.
That should allow future possible changes to core eth_dev structures
to be transparent to the user and help to avoid ABI/API breakages.
The plan is to keep minimal part of data from rte_eth_dev public,
so we still can use inline functions for fast-path calls
(like rte_eth_rx_burst(), etc.) to avoid/minimize slowdown.
The whole idea beyond this new schema:
1. PMDs keep to setup fast-path function pointers and related data
inside rte_eth_dev struct in the same way they did it before.
2. Inside rte_eth_dev_start() and inside rte_eth_dev_probing_finish()
(for secondary process) we call eth_dev_fp_ops_setup, which
copies these function and data pointers into rte_eth_fp_ops[port_id].
3. Inside rte_eth_dev_stop() and inside rte_eth_dev_release_port()
we call eth_dev_fp_ops_reset(), which resets rte_eth_fp_ops[port_id]
into some dummy values.
4. fast-path ethdev API (rte_eth_rx_burst(), etc.) will use that new
flat array to call PMD specific functions.
That approach should allow us to make rte_eth_devices[] private
without introducing regression and help to avoid changes in drivers code.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes a pointer to rte_eth_dev and queue
index.
For future work to hide rte_eth_devices[] and friends it would be
plausible to unify parameters list of all fast-path ethdev ops.
This patch changes eth_rx_queue_count() to accept pointer to internal
queue data as input parameter.
While this change is transparent to user, it still counts as an ABI change,
as eth_rx_queue_count_t is used by ethdev public inline function
rte_eth_rx_queue_count().
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
At queue configure stage always allocate space for maximum possible
number (RTE_MAX_QUEUES_PER_PORT) of queue pointers.
That will allow 'fast' inline functions (eth_rx_burst, etc.) to refer
pointer to internal queue data without extra checking of current number
of configured queues.
That would help in future to hide rte_eth_dev and related structures.
It means that from now on, each ethdev port will always consume:
((2*sizeof(uintptr_t))* RTE_MAX_QUEUES_PER_PORT)
bytes of memory for its queue pointers.
With RTE_MAX_QUEUES_PER_PORT==1024 (default value) it is 16KB per port.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
By design, in a GROUP flow, outer match criteria go to "ENC" fields
of the action rule match specification. The current HW/FW hasn't
got support for these fields (except the VXLAN VNI) yet.
As a workaround, start parsing the pattern from the tunnel item.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Such a counter will only report the number of hits, which is actually
a sum of two contributions (the JUMP rule's own counter + indirect
increments issued by counters of the associated GROUP rules.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
By design, JUMP flows should be represented solely by the outer rules. But
the HW/FW hasn't got support for setting Rx mark from RECIRC_ID on outer
rule lookup yet. Neither does it support outer rule counters. As a
workaround, an action rule of lower priority is used to do the job.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The current HW/FW doesn't allow to match on MAC addresses in outer rules.
One day this will change for sure, but right now a workaround is needed.
Match on VLAN presence in outer rules is also unsupported. Ignore it.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Support generic callbacks which callers will invoke to get
PMD-specific actions and items used to produce JUMP and
GROUP flows and to detect tunnel information.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
GROUP is an in-house term for so-called "tunnel_match" flows.
On parsing, they are detected by virtue of PMD-internal item
MARK. It associates a given flow with its tunnel context.
Such a flow is represented by a MAE action rule which is
chained with the corresponding JUMP rule's outer rule
by virtue of matching on its recirculation ID.
GROUP flows do narrower match than JUMP flows do and
decapsulate matching packets (full offload).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Currently, there is an API for setting recirculation ID in
outer rules. Add an API to let action rules match on it.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
JUMP is an in-house term for so-called "tunnel_set" flows. On parsing,
they are identified by virtue of actions MARK (PMD-internal) and JUMP.
The action MARK associates a given flow with its tunnel context.
Such a flow is represented by a MAE outer rule (OR) which has its
recirculation ID set. This ID is also associated with the tunnel
context. The OR is supposed to set this ID in 8 high bits of
Rx mark in matching packets. It also counts the packets.
Packets that hit the OR but miss in action rule (AR) table,
should go to MAE admin PF (that is, to DPDK) by default.
Support for the use of action COUNT in JUMP
flows will be introduced by later patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
When an outer rule is hit, it can pass recirculation ID down
to action rule lookup, and action rules can match on this ID
instead of matching on the outer rule allocation handle.
By default, recirculation ID is assumed to be zero.
Add an API to set recirculation ID in outer rules.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Later patches add support for tunnel offload on Riverhead (EF100).
A board can host at most 254 tunnels. Partially offloaded (missed)
tunnel packets are identified by virtue of 8 high bits in Rx mark.
Add basic definitions of the upcoming tunnel offload support and
take care of the dedicated bits in Rx mark across the driver.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
vnic_dev_capable_filter_mode() currently fails when
CMD_CAPABILITY(CMD_ADD_FILTER) returns ERR_EPERM. In turn, this
failure causes the driver initialization to fail.
But, firmware may legitimately return ERR_EPERM. For example, VF vNIC
returns ERR_EPERM when it does not support filtering at all. So, treat
ERR_EPERM as "no filtering available" instead of an unexpected error.
Fixes: 322b355f21 ("net/enic/base: bring NIC interface functions up to date")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
