When the last fdir flow be destroyed, the flag "mask_added"
should be reset, so the remain mask info will not take effect
when a new flow be added.
Fixes: a14de8b498 ("net/ixgbe: destroy consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch disables X550EM_X 1Gbase-t led_[on|off] support since
the LEDs are wired to the PHY and the driver can not access the
PHY. led_[on|off]
Support is disabled by setting the function pointer to NULL.
init_led_link_act is also set to NULL.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch removes some some 1GBASE-T PHY access since the FW
configures the PHY. SW shall not configure or initialize link.
Accessing the PHY would require the use of MDI clause 22 which
should be avoided in high layer driver code.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Instead of many PMD define their own macro, define a generic one in
ethdev and use that in PMDs.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
remove __rte_unused instances that are not required.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
See: 8f094a9ac5 ("mbuf: set mbuf fields while in pool")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector PMD is very sensitive to the layout of the mbuf, especially on
the RX path. Add in some compile-time checks to make sure the mbuf layout
assumptions are valid, and to provide hints to anyone changing the mbuf
where things may need to be updated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Different drivers use internal macros like force_inline for compiler
always inline feature.
Standardizing it through __rte_always_inline macro.
Verified the change by comparing the output binary file.
No difference found in the output binary file with this change.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
vfio is the kernel framework used by the vfio-pci kernel driver.
DPDK drivers do not rely solely on vfio, but rather on vfio-pci to gain
access to pci resources.
Fixes: 0880c40113 ("drivers: advertise kmod dependencies in pmdinfo")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There is a bug in previous fix for lsc interrupt.
lsc interrupt is not disabled before delayed handler,
that cause the delayed handler be re-entered.
Fixes: 9b66721070 ("net/ixgbe: fix blocked interrupts")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
hw->mac.ops.get_media-type() of ixgbe VF is NULL and should not
be called directly. It had better be replaced by calling
ixgbe_get_media_type( ) to avoid crash.
Fixes: c12d22f65b ("net/ixgbe: ensure link status is updated")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Laurent Hardy <laurent.hardy@6wind.com>
Add a comment documenting explicitly that we are falling through the case
statements to the next one.
Fixes: f9072f8b90 ("ixgbe: migrate flow director filtering to new API")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For base code in drivers shared with other projects, disable the new
warnings from gcc 7 about unlabelled fall-through in switch statements.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Return mbuf points of _recv_raw_pkts_vec are modified out of bound.
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
There exists case that software sets mtu (i.e jumbo frame) of
ixgbe device when it's stopped. Before the fix, scattered_rx
is cleared during device stop, and setting jumbo frame mtu
after device stop will always fail as scattered_rx is 0.
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some customers find that 82599 NIC DPDK VF PMD can't receive any
broadcast packets when it is bound to igb_uio in the first time
to run a DPDK application like testpmd. But when the application
is quited and run again, the DPDK VF PMD can receive broadcast
packets again. The associated PF is run by kernel driver when
the VF is driven by DPDK PMD.
Fixes: 260e2e22e2 ("net/ixgbe/base: move multicast mode update")
Fixes: 72dec9e37a ("ixgbe: support multicast promiscuous mode on VF")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Pool 0 is not PF, it's VF 0. So the MAC is set for VF 0
but not PF.
The code introduced a weird issue. In the scenario PF + VF,
when only starting PF, the default PF MAC address is working.
But after starting a VF, the default PF MAC address becomes
the VF's address.
Use the pool which is not occupied by VFs for PF to fix it.
Fixes: 8164fe8284 ("ixgbe: add default mac address modifier")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some customers find adding MAC addr to VF sometimes can fail,
but it is still stored in dev->data->mac_addrs[ ]. So this
can lead to some errors that assumes the non-zero entry in
dev->data->mac_addrs[ ] is valid.
Following acknowledgements are from specific NIC PMD
maintainer for their managing part.
This patch changes the ethdev internal API, it should not be
backported to a stable/LTS release so far.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To achieve functionality of retrieving only specific statistics
given by application there are two new functions added:
ixgbe_dev_xstats_get_by_ids() which retrieve
values of statistics specified by ids array
and ixgbe_dev_xstats_get_names_by_ids() which retrieve
names of statistics specified by ids array.
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Revert patches to provide clear view for
upcoming changes. Reverted patches are listed below:
commit ea85e7d711 ("ethdev: retrieve xstats by ID")
commit a954495245 ("ethdev: get xstats ID by name")
commit 1223608adb ("app/proc-info: support xstats by ID")
commit 25e38f09af ("net/e1000: support xstats by ID")
commit 923419333f ("net/ixgbe: support xstats by ID")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Add the support of RTE_FLOW_ITEM_TYPE_SCTP type packet for
ixgbe ntuple filter.
Fixes: 672be56d76 ("net/ixgbe: parse n-tuple filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In case of fiber and link speed set to 1Gb at peer side (with autoneg
or with defined speed), link status could be not properly updated at
time cable is plugged-in.
Indeed if cable was not plugged when device has been configured and
started then link status will not be updated properly with new speed
as no link setup will be triggered.
To avoid this issue, IXGBE_FLAG_NEED_LINK_CONFIG is set to try a link
setup each time link_update() is triggered and current link status is
down. When cable is plugged-in, link setup will be performed via
ixgbe_setup_link().
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Acked-by: Wei Dai <wei.dai@intel.com>
The type check for flow_type should be IXGBE_ATR_FLOW_TYPE_IPV4
in special card not RTE_ETH_FLOW_NONFRAG_IPV4_OTHER.
Fixes: dc0c16105d ("ixgbe: fix X550 flow director check")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When Receive Side Coalescing (RSC) is not used, the RSC Disable
(RSC_DIS) filed of register Receive Filter Control Register (RFCTL)
should be set according to ixgbe datasheet.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Acquire PHY semaphore before device reset
* Add support for 2.5G KX physical layer
* Add MAC X550em/X557 LED on|off support
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates ixgbe_led_[on|off]_t_X550em for MAC or PHY connected
LEDs. To support both MAC or PHY connected LEDs, both MAC and PHY led
control registers are configured.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Add another define for the 2.5G KX physical layer. This requires all
variables and support functions that deal with "physical_layer" to be
bumped to u64 as this is the 33rd define.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
A recent firmware change fixed an issue to acquire the PHY semaphore
before accessing PHY registers. This led to a case where SW can issue
a device reset clearing the MDIO registers. This patch makes SW acquire
the PHY semaphore before issuing a device reset.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
To achieve functionality of retrieving only specific statistics
given by application there are two new functions added:
ixgbe_dev_xstats_get_by_ids() which retrieve
values of statistics specified by ids array
and ixgbe_dev_xstats_get_names_by_ids() which retrieve
names of statistics specified by ids array.
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
DPDK community has several emails discussion on this topic,
these mails link is bellow:
http://dpdk.org/ml/archives/dev/2017-March/060379.html,
http://dpdk.org/ml/archives/dev/2017-March/060295.html,
items like VLAN can already have several valid "types"
(0x88a8, 0x8100, 0x9100), and who knows what will come up
in the future.
And ixgbe_flow just ignores the types when do filter configuration.
So it may be reasonable to delete the related tpid check process.
Also add some more comment log on stack explanation.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Fix generic filter return info is not readable
when repeat to create a rule.
Fixes: 72c135a89f ("net/ixgbe: create consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Create a new file rte_pmd_ixgbe.c for all the private
APIs. Move all the related code to the new file.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With the mbuf rework, we now have 8 contiguous bytes to be rearmed in the
mbuf just before the 8-bytes of olflags. If we don't do the rearm write
inside the descriptor ring replenishment function, and delay it to
receiving the packet, we can do a single 16B write inside the RX function
to set both the rearm data, and the flags together.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
To avoid multiple stores on fast path, Ethernet drivers
aggregate the writes to data_off, refcnt, nb_segs and port
to an uint64_t data and write the data in one shot
with uint64_t* at &mbuf->rearm_data address.
Some of the non-IA platforms have store operation overhead
if the store address is not naturally aligned.This patch
fixes the performance issue on those targets.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that the m->next pointer and m->nb_segs is expected to be set (to
NULL and 1 respectively) after a mempool_get(), we can avoid to write them
in the Rx functions of drivers.
Only some drivers are patched, it's not an exhaustive patch. It gives
the idea to do the same in other drivers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Ixgbe supports to set the relative bandwidth for the TCs.
It's a global setting for the PF and all the VFs of a
physical port.
This feature provide the API to set the bandwidth.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To add a wrapper function to remove the limit of tx burst size and
implement the "make an best effort to transmit the pkts" policy.
The patch makes ixgbe vec function work in a consistent behavior
like ixgbe_xmit_pkts_simple and ixgbe_xmit_pkts do that.
Cc: Helin Zhang <helin.zhang@intel.com>
Cc: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
4 and 8 TCs are supported on ixgbe. By default there're
8 TCs. So when initializing the device, the bandwidth for
8 TCs is set.
When changing the TC number, it's only considered setting
the bandwidth for 4 TCs. If the user change the number
from 4 to 8, the TCs' bandwidth is not right.
Fixes: 0807f80d35 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Without setting the id, calling xstats_get twice with same array causes
memory corruption.
Also, if IXGBEVF_NB_XSTATS will be different than 1 in the future,
this will cause issues.
Fixes: 156712ba40 ("ixgbevf: add extending stats")
Signed-off-by: Ido Barnea <ibarnea@cisco.com>
