The reorganization of the mbuf structure induces an ABI breakage.
Bump the library version, and update the documentation accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit adds a section to the docs listing the event
device PMDs available.
It then adds the software eventdev PMD to the listed event
devices.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
In a polling model, lcores poll ethdev ports and associated
rx queues directly to look for packet. In an event driven model,
by contrast, lcores call the scheduler that selects packets for
them based on programmer-specified criteria. Eventdev library
adds support for event driven programming model, which offer
applications automatic multicore scaling, dynamic load balancing,
pipelining, packet ingress order maintenance and
synchronization services to simplify application packet processing.
By introducing event driven programming model, DPDK can support
both polling and event driven programming models for packet processing,
and applications are free to choose whatever model
(or combination of the two) that best suits their needs.
This patch adds the eventdev specification header file.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Rename "rte_virtio_net.h" to "rte_vhost.h", to not let it be virtio
net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We used to use rte_vhost_driver_session_start() to trigger the vhost-user
session. It takes no argument, thus it's a global trigger. And it could
be problematic.
The issue is, currently, rte_vhost_driver_register(path, flags) actually
tries to put it into the session loop (by fdset_add). However, it needs
a set of APIs to set a vhost-user driver properly:
* rte_vhost_driver_register(path, flags);
* rte_vhost_driver_set_features(path, features);
* rte_vhost_driver_callback_register(path, vhost_device_ops);
If a new vhost-user driver is registered after the trigger (think OVS-DPDK
that could add a port dynamically from cmdline), the current code will
effectively starts the session for the new driver just after the first
API rte_vhost_driver_register() is invoked, leaving later calls taking
no effect at all.
To handle the case properly, this patch introduce a new API,
rte_vhost_driver_start(path), to trigger a specific vhost-user driver.
To do that, the rte_vhost_driver_register(path, flags) is simplified
to create the socket only and let rte_vhost_driver_start(path) to
actually put it into the session loop.
Meanwhile, the rte_vhost_driver_session_start is removed: we could hide
the session thread internally (create the thread if it has not been
created). This would also simplify the application.
NOTE: the API order in prog guide is slightly adjusted for showing the
correct invoke order.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Features could be changed after the feature negotiation. For example,
VHOST_F_LOG_ALL will be set/cleared at the start/end of live migration,
respecitively. Thus, we need a new callback to inform the application
on such change.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Rename "virtio-net" to "vhost" in the API comments and vhost prog guide.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
rename "virtio_net_device_ops" to "vhost_device_ops", to not let it
be virtio-net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
They are virtio-net specific and should be defined inside the virtio-net
driver.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We used to use rte_vhost_get_queue_num() for telling how many vrings.
However, the return value is the number of "queue pairs", which is
very virtio-net specific. To make it generic, we should return the
number of vrings instead, and let the driver do the proper translation.
Say, virtio-net driver could turn it to the number of queue pairs by
dividing 2.
Meanwhile, mark rte_vhost_get_queue_num as deprecated.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Assume there is an application both support vhost-user net and
vhost-user scsi, the callback should be different. Making notify
ops per vhost driver allow application define different set of
callbacks for different driver.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The rte_eth_vhost_feature_disable/enable/get APIs are just a wrapper of
rte_vhost_feature_disable/enable/get. However, the later are going to
be refactored; it's going to take an extra parameter (socket_file path),
to let it be per-device.
Instead of changing those vhost-pmd APIs to adapt to the new vhost APIs,
we could simply remove them, and let vdev to serve this purpose. After
all, vdev options is better for disabling/enabling some features.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Introduce few APIs to set/get/enable/disable driver features.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
So far, virtio-user with vhost-user as the backend can only support
client mode. So when vhost user backend is down, i.e., unix socket
connection is broken, the connection cannot be re-connected. We will
forcely set the link state to be down.
Note: virtio-user with vhost-kernel as the backend still cannot
support lsc now as we fail to find a way to monitor the backend, tap
device, up/down events.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
For rxq interrupt, the device (backend driver) will notify driver
through callfd. Each virtqueue has a callfd. To keep compatible
with the existing framework, we will give these callfds to
interrupt thread for listening for interrupts.
Before that, we need to allocate intr_handle, and fill callfds
into it so that driver can use it to set up rxq interrupt mode.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Update the "Virtio_user for Container Networking" doc, add the
"--file-prefix" option to testpmd in host and container to avoid
hugepage config file conflict.
Fixes: 50665deebd ("doc: add guide to use virtio-user for container networking")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch implements support for the Virtio MTU feature.
When negotiated, the host shares its maximum supported MTU,
which is used as initial MTU and as maximum MTU the application
can set.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a CLI in testpmd to test the TC min bandwidth
setting.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch fixes a trivial typo in i40e documentation;
The comment about the behavior upon DPDK application quit was wrongly
titled as "after DPDK application exist" instead of "after DPDK
application exit", and this trivial patch fixes it.
Fixes: edf1b61831 ("doc: add limitations for i40e PMD")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch exposes the following item fields through the flow command:
- MPLS label
- GRE protocol
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds MPLS and GRE items to generic rte flow.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch includes slowpath configuration and fastpath changes
to support LRO and TSO. A bit of revamping is needed in order
to make use of existing packet classification schemes in Rx fastpath
and for SG element processing in Tx.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add limited support for ntuple filter and flow director configuration.
The filtering is based on 4-tuples viz src-ip, dst-ip, src-port,
dst-port. The mask fields, tcp_flags, flex masks, priority fields,
Rx queue drop etc are not supported.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Updates the documentation and feature lists for the AVP PMD device.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds support for setting and clearing promiscuous mode on an AVP device.
When enabled the _mac_filter function will allow packets destined to any
MAC address to be processed by the receive functions.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds function required for receiving packets from the host application via
AVP device queues. Both the simple and scattered functions are supported.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds support for "dev_configure" operations to allow an application to
configure the device.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This commit introduces the AVP PMD file structure without adding any actual
driver functionality. Functional blocks will be added in later patches.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Most ConnectX-3 adapters expose two physical ports on a single PCI bus
address.
Add a new port parameter allowing the user to choose
either or both physical ports to be used by the application.
This parameter is used as follows:
Selecting only the second port:
-w 00:00.0,port=1
Selecting both ports:
-w 00:00.0,port=0,port=1
If no parameter is given, the default behavior is unchanged: all ports
are probed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add a CLI to set some TCs' strict link priority mode
on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific TC's max bandwidth
on a specific VF from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set TCs' min bandwidth on a specific VF
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific VF's TX max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set some TCs to strict priority mode.
It's a global setting on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set a specific TC's max bandwidth on a VF.
User can call the API to set VF TC's max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Allocate all TCs' relative bandwidth (percentage) on
a specific VF.
It can be taken as relative min bandwidth setting.
User can call the API to set VF TC's min bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Support setting VF max bandwidth from PF.
User can call the API on PF to set a specific VF's
max bandwidth.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
