Note: virtio is a para-virtualization device, which indicates that its
features depend on not only front end but also back end. Here by X, we
just mean the feature is supported in front end.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
The link speed configuration is now done with bitmaps so 100G speed
requires only a new bit flag.
The actual link speed is a number so its size must be increased from
16-bit to 32-bit.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tested-by: Matej Vido <vido@cesnet.cz>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
VLAN insertion can be done in hardware when supported in Verbs. A software
fallback is provided otherwise. The software implementation is also used
when multi-packet send is enabled on a queue, as both features are mutually
exclusive.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Environment variable MLX5_PMD_ENABLE_PADDING enables HW packet padding
in PCI bus transactions.
When packet size is cache aligned and CRC stripping is enabled, 4 fewer
bytes are written to the PCI bus. Enabling padding makes such packets
aligned again.
In cases where PCI bandwidth is the bottleneck, padding can improve
performance by 10%.
This is disabled by default since this can also decrease performance for
unaligned packet sizes.
Signed-off-by: Olga Shern <olgas@mellanox.com>
fix packet padding macro check
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Secondary processes are expected to use queues and other resources
allocated by the primary, however Verbs resources can only be shared
between processes when inherited through fork().
This limitation can be worked around for TX by configuring separate queues
from secondary processes.
Signed-off-by: Or Ami <ora@mellanox.com>
The patch introduces a new PMD. This PMD is implemented as thin wrapper
of librte_vhost. It means librte_vhost is also needed to compile the PMD.
The vhost messages will be handled only when a port is started. So start
a port first, then invoke QEMU.
The PMD has 2 parameters.
- iface: The parameter is used to specify a path to connect to a
virtio-net device.
- queues: The parameter is used to specify the number of the queues
virtio-net device has.
(Default: 1)
Here is an example.
$ ./testpmd -c f -n 4 --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1' -- -i
To connect above testpmd, here is qemu command example.
$ qemu-system-x86_64 \
<snip>
-chardev socket,id=chr0,path=/tmp/sock0 \
-netdev vhost-user,id=net0,chardev=chr0,vhostforce,queues=1 \
-device virtio-net-pci,netdev=net0,mq=on
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Update for queue state event name:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Mmap PCI resource file and add inline functions for reading from and
writing to PCI resource address space.
Add description of IBUF and OBUF address space.
Add configuration option for setting which firmware type will be used.
Right address space values for IBUFs and OBUFs offsets are used
according to configuration option CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS.
Setting link up/down and getting info about link status is done through
mmapped PCI resource address space.
Signed-off-by: Matej Vido <vido@cesnet.cz>
PMD was of type PMD_VDEV which means that PCI device is not recognised
automatically during EAL initialization, but it has to be created by
EAL option --vdev.
Now, PMD is of type PMD_PDEV which means that PCI device is probed
and recognised during EAL initialization automatically.
Path to szedata2 device file is matched with device and the count
of available RX and TX DMA channels is found out during device
initialization.
Initialization, starting and stopping of queues is changed to better
correspond with Ethernet device API model. Function callbacks
(rx|tx)_queue_(start|stop) are added. Unnecessary items are removed
from ethernet device private data structure.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Allows HW to strip the 802.1Q header from incoming frames and report it
through the mbuf structure.
This feature requires MLNX_OFED >= 3.2.
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch enables reading sglort (global resource tag) info into the
mbuf for RX and inserting an FTAG (Fabric Tag) at the beginning of the
packet for TX. The vlan_tci_outer field selected from rte_mbuf structure
for sglort is not used in fm10k now.
In FTAG based forwarding mode, the switch will forward packets according
to glort info in FTAG rather than mac and vlan table.
To activate this feature, user needs to pass a devargs parameter to eal
for fm10k device like "-w 0000:84:00.0,enable_ftag=1". Currently this
feature is supported only on PF, because FM10K_PFVTCTL register is
read-only for VF.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
In interrupt mode, each rx queue can have one interrupt to notify the
application when packets are available in that queue. Some queues
also can share one interrupt.
Currently, fm10k needs one separate interrupt for mailbox. So, only those
drivers which support multiple interrupt vectors e.g. vfio-pci can work
in fm10k interrupt mode.
This patch uses the RXINT/INT_MAP registers to map interrupt causes
(rx queue and other events) to vectors, and enable these interrupts
through kernel drivers like vfio-pci.
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Fill in the supported features matrix for CXGBE PMD.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Add introductions on how to enable Vector FM10K Rx/Tx functions,
the preconditions and assumptions on Rx/Tx configuration parameters.
The new content also lists the limitations of vector, so app/customer
can do better to select best Rx/Tx functions.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch documents that the statistics of fm10k based NICs must be
read regularly in order to avoid an undetected 32 bit integer-overflow.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds a note to the ixgbe PMD guide, stating
the minimum time that statistics must be polled from
the hardware in order to avoid register values becoming
saturated and "sticking" to the max value.
Reported-by: Jerry Zhang <jerry.zhang@intel.com>
Tested-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Announce that Malicious Driver Detection is not supported.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
The physically linked-together combined library has been an increasing
source of problems, as was predicted when library and symbol versioning
was introduced. Replace the complex and fragile construction with a
simple linker script which achieves the same without all the problems,
remove the related kludges from eg mlx drivers.
Since creating the linker script is practically zero cost, remove the
config option and just create it always.
Based on a patch by Sergio Gonzales Monroy, linker script approach
initially suggested by Neil Horman.
Suggested-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It was requested by Intel, more than one year ago, to replace the name
"Intel DPDK" by "DPDK".
Some references to the old name were still in some docs and code comments,
leading to confusion.
Fixes: ac8ada004c12 ("doc: remove Intel references from release notes")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
In order to better compare the drivers and check what is missing
for a common baseline, we need to fill a matrix.
A CSS trick is used to fit the HTML page.
The PDF output needs some LaTeX wizardry.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove **Contents** and |Today| from the rst doc index files since
these are already added automatically to PDF files and are of
little value to the Html files where the Contents is shown in a
sidebar.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add note to the documentation that only x86_64 versions of the external
libraries are currently provided.
Signed-off-by: Matej Vido <matejvido@gmail.com>
- Update features, limitations, configuration and prerequisites sections.
- Add a note to describe RSS behavior differences with librte_pmd_mlx4 in
testpmd.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
-Split "Features" and "Limitations" sections.
-Update limitations with missing information.
-Update prerequisites with supported MLNX_OFED release, firmware and
CPU architectures.
-Enhance usage example with openibd script.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This documentation covers introductions and limitations on Intel
FM10000 series products.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update interrupt related limitations for e1000em nic.
It only support one interrupt source and not support auto-clear.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Correct the sample code in the pcap_ring.rst file to match the latest
rte_eth_ring.c code.
The parameters to the rte_eth_from_rings() function have changed since
the documentation was written.
The API change occurred before DPDK 1.8 when the rst files were added.
The original documentation on which the pcap_ring.rst file was based was
not correct.
Fixes: fc1f2750a3ec ("doc: programmers guide")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Describe how applications can benefit from CQE compression.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add virtual PMD which communicates with COMBO cards through sze2
layer using libsze2 library.
Since link_speed is uint16_t, there can not be used number for 100G
speed, therefore link_speed is set to ETH_LINK_SPEED_10G until the
type of link_speed is solved.
Signed-off-by: Matej Vido <matejvido@gmail.com>
Increase max_rx_pktlen to accommodate jumbo frame size. Perform sanity
checks and enable jumbo mode in rx queue setup. Set link mtu based on
max_rx_pktlen.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
The RX_OLFLAGS option was renamed from DISABLE to ENABLE in driver code
and linux config.
It is now renamed also in bsd config and documentation.
Fixes: 359f106a69a9 ("ixgbe: prefer enabling olflags rather than not disabling")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
