Since this driver does not distinguish unicast/multicast addresses,
applications could always rely on the standard MAC add/remove/set
interface to configure both types.
As a result, the multicast address list interface never got implemented
(rte_eth_dev_set_mc_addr_list()) however PMD-agnostic applications still
rely on it for compatibility reasons; a wrapper is therefore required.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Mellanox mlx5 PMD implements the list of devices to process the memory
free events to reflect the actual memory state to Memory Regions.
Because this list contains the devices and devices may share the
same context the callback routine may be called multiple times
with the same parameter, that is not optimal. This patch modifies
the list to contain the device contexts instead of device objects
and shared context is included in the list only once.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The multiport Infiniband device support was introduced [1].
All active ports, belonging to the same Infiniband device use the single
shared Infiniband context of that device and share the resources:
- QPs are created within shared context
- Verbs flows are also created with specifying port index
- DV/DR resources
- Protection Domain
- Event Handlers
This patchset adds support for Memory Regions sharing between
ports, created on the base of multiport Infiniband device.
The datapath of mlx5 uses the layered cache subsystem for
allocating/releasing Memory Regions, only the lowest layer L3
is subject to share due to performance issues.
[1] http://patches.dpdk.org/cover/51800/
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
There are some physical link settings can be queried from
Ethernet devices: link status, link speed, speed capabilities,
duplex mode, etc. These setting do not make a lot of sense for
representors due to missing physical link. The new kernel drivers
dropped query for link settings for representors causing the
ioctl call to fail. This patch adds some kind of emulation
of link settings to PMD - representors inherit the link parameters
from the master device. The actual link status (up/down)
is retrieved from the representor device.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When creating the modify action using Direct Rules, we need to
add flags to mark, if the action will be done on root table or on
private table.
Fixes: 4f84a19779 ("net/mlx5: add Direct Rules API")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The RX stats will increase even no packets sent, this patch fix this issue
by modifying ipackets and ibytes statistics based on vsi instead of port
to avoid statistics error.
Fixes: a37bde5631 ("net/ice: support statistics")
Cc: stable@dpdk.org
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Identified by LGTM, the loop was incorrectly incrementing a different
variable and conditional on another.
Fixes: fe2b986ac6 ("net/dpaa2: support generic flow")
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Fix the potential overflow in expression 1 << begin by using 1ULL.
Coverity issue: 279437, 279445
Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
'rte_eth_dev_get_port_by_name()' return value is not checked caught by
coverity, adding return value check.
Coverity issue: 305853
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The ring name is passed in as part of this drivers API, but it
doesn't check that the name is not truncated.
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Fixes: e1e4017751 ("ring: add new driver")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Don't hard code string length in two place; use sizeof() instead.
Ring name should use RTE_RING_NAMESIZE.
Fixes: 96cb195211 ("net/ring: use EAL APIs in PMD specific API")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Whitespace fixes to bring inline with current DPDK style.
Fixes: e1e4017751 ("ring: add new driver")
Fixes: a74a99bbb8 ("ring: free rings when detaching device")
Fixes: 61934c0956 ("ring: convert to use of PMD_REGISTER_DRIVER and fix linking")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix the issues reported by Coverity check, "Null-checking
vsi suggests that it may be null, but it has already been
dereferenced on all paths leading to the check."
Coverity issue: 328509, 328519, 328523
Fixes: e0dcf94a0d ("net/ice: support VLAN ops")
Fixes: ff963bfa7c ("net/ice: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Rx queue setup function checks configured MTU to make sure that
no oversized packets can be received. But a following call to
set MTU function might make this check irrelevant.
Add a function to check MTU size against Rx buffer size and
additional Rx queue info, including Rx scatter offload.
Fixes: e961cf425e ("net/sfc: support MTU change")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
If there is the support of DevX is exposed by rdma-core but
DevX is not supported by or disabled for the specific interface
the mlx5_devx_cmd_query_hca_attr() routine returns an error
preventing the device from successful probing. The routine
should be invoked only in case of enabled DevX.
Fixes: e2b4925ef7 ("net/mlx5: support Direct Rules E-Switch")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In mlx5_rxq.c, in some comments, text includes "Tx" instead of "Rx".
In mlx5_txq.c, in some comments, text includes "Rx" instead of "Tx".
This patch fixes these typos.
Fixes: faf2667fe8 ("net/mlx5: separate DPDK from verbs Tx queue objects")
Fixes: a1366b1a2b ("net/mlx5: add reference counter on DPDK Rx queues")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
All the library calls must be called via the glue layer.
Fixes: b2177648b8 ("net/mlx5: add Direct Rules flow data alloc/free routines")
Fixes: 79e35d0d59 ("net/mlx5: share Direct Rules/Verbs flow related structures")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Looking for an ethdev port is better (and more efficient)
with an ethdev API than an EAL one.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The flow group should be initialized.
For example selecting if the encapsulation is for root or private tables
is based on the flow->group value.
Fixes: 4f84a19779 ("net/mlx5: add Direct Rules API")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
stats_reset has been missed when support stats in iavf driver.
This patch add statistics reset function.
Fixes: f4a41a6953 ("net/avf: support stats")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The rte_timer_alt_manage function should track which is the running
timer and whether or not it was updated by a callback in the priv_timer
structure that corresponds to the running lcore, so that restarting
or stopping the timer from the callback works correctly.
Fixes: c0749f7096 ("timer: allow management in shared memory")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
A null array is allowed to be passed as one of the parameters to
rte_timer_alt_manage() as a convenience. When that happened, an
anonymous array was created using compound literal syntax, and Coverity
detected that the object was out of scope in later uses of it. Create
an object in the proper scope instead.
Coverity issue: 337919
Fixes: c0749f7096 ("timer: allow management in shared memory")
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
The DSW event device didn't set RTE_EVENT_DEV_CAP_MULTIPLE_QUEUE_PORT
and RTE_EVENT_DEV_CAP_NONSEQ_MODE, even though it has both these
capabilities.
Fixes: 4540ee9c68 ("event/dsw: add device and queue configuration")
Cc: stable@dpdk.org
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
"VFIO group is not viable" error message is correct
but not very user friendly for something which can
usually be easily rectified.
Add some additional text to give more of a hint.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
As part of the documentation update on the changes made to the power
library for 19.05, information on SST-BF was added. This patch updates
the comment to clarify that a priority core is an SST-BF high
frequency core.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
In the Power Library, a new bit has been added to the mask returned by
rte_power_get_capabilities which indicates whether the core is an
Intel SST-BF high frequency core.
The distributor sample application has been enhanced to be aware of
Intel SST-BF high frequency cores. Docs also contain a link to
the Intel SST-BF application note.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The function check_input() was returning a bool as error code.
It is changed to return an int, semantically more correct.
While at it, make checks of validate_action_name() return
explicit as described in the coding guidelines.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
IPC is a big part of secondary process infrastructure now,
and I have been de-facto maintainer for it since 18.05.
Update MAINTAINERS file to match.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Length of buffer and number of fd's to send are signed values, so
they can be negative, but the API doesn't check for that. Fix it
by checking for negative values as well.
Fixes: bacaa27540 ("eal: add channel for multi-process communication")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Currently, IPC does not check received messages for invalid data
and passes them to user code unchanged. This may result in buffer
overruns on reading message data. Fix this by checking the message
length and fd number on receive, and discard any messages that
are not valid.
Fixes: bacaa27540 ("eal: add channel for multi-process communication")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
According to manpage, ENOBUFS error indicates that either the
input or the output queue is full. This should be considered
an error, but it is treated as an "ignore" condition. Fix the
code to report an error instead.
Fixes: bacaa27540 ("eal: add channel for multi-process communication")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
When sending synchronous IPC requests, the caller must free the response
buffer if the request was successful and reply is no longer needed.
Fix the code to correctly
use the IPC API.
Bugzilla ID: 228
Fixes: c9aa56edec ("net/tap: access primary process queues from secondary")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
When sending multiple requests, rte_mp_request_sync
can succeed sending a few of those requests, but then
fail on a later one and in the end return with rc=-1.
The upper layers - e.g. device hotplug - currently
handles this case as if no messages were sent and no
memory for response buffers was allocated, which is
not true. Fixed by always freeing memory buffers on
failure.
Bugzilla ID: 228
Fixes: 783b6e5497 ("eal: add synchronous multi-process communication")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
This message was missing newline, and should capitalize
"Cannot" like all the others in this area.
Fixes: ac9e4a1737 ("eal: support attach/detach shared device from secondary")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rami Rosen <ramirose@gmail.com>
coverity complains about a null-termination after a read,
so we terminate once we exit the do-while read loop.
Coverity issue: 337680
Fixes: a63504a90f ("examples/power: add JSON string handling")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
The freqs array in freq_info struct has RTE_MAX_LCORE_FREQS elements,
yet the code can attempt to look at the index at RTE_MAX_LCORE,
which may be greater than RTE_MAX_LCORE_FREQS. Fix to limit index to
RTE_MAX_LCORE_FREQS.
Coverity issue: 337660
Fixes: d26c18c932 ("examples/vm_power: cpu frequency in host")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
For client_server_mp, the total number of buffers for the mbuf mempool
should be correctly calculated. Otherwise, having more clients will stop
traffic.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Traditionally, only a single buffer pool per port
(or, per-port-per-socket) is created in l3fwd application.
If separate pools are created per-port, it might lead to gain in
performance as packet alloc/dealloc requests would be isolated
across ports (and their corresponding lcores).
This patch adds an argument '--per-port-pool' to the l3fwd application.
By default, old mode of single pool per port (split on sockets) is
active.
L3fwd user guide is also updated by this patch.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
In rte_fpga_do_pr() function, if 'stat' return error the
'file_fd' is never closed thus leading a fd leak.
This patch avoids this.
Coverity issue: 279441
Fixes: ef1e8ede3d ("raw/ifpga: add Intel FPGA bus rawdev driver")
Cc: stable@dpdk.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
vdev driver names are not available in create if called from probe.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
