The RX and TX Prefetch, Host, and Write-back threshold values are
defined but not used anywhere. They are leftovers from a previous
patch.
Fixes: 81f7ecd9 ("examples: use factorized default Rx/Tx configuration")
Cc: stable@dpdk.org
Signed-off-by: Bao-Long Tran <longtb5@viettel.com.vn>
Using memory on the stack instead of on the heap by calling malloc
also avoid memory leak in case of test case failures
Fixes: 88d0e47880 ("raw/skeleton: fix memory leak on test failure")
Cc: stable@dpdk.org
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The function rte_malloc_set_limit was defined but never implemented.
Mark it as deprecated for now, and remove in next release.
There is no point in keeping dead code.
"You Aren't Going to Need It"
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Linux EAL will attach the shared config at an arbitrary address,
find out where the shared config is mapped in the primary, and
then will reattach it at that exact address.
FreeBSD version doesn't seem to go for that extra reattach step,
which makes one wonder how did it ever work in the first place.
Fix the FreeBSD init to also reattach shared config to the exact
same place the primary process has it.
Fixes: 764bf26873 ("add FreeBSD support")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
When init is complete, EAL is supposed to update internal config
to indicate that initialization is complete. Add missing write.
Fixes: a99c96e96a ("eal: add internal flag of init completed")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The default policy for offload-specific fields is that
they are undefined unless the corresponding offloads are
requested in mbuf ol_flags. This is also the case for outer
L2 and L3 length fields which must not be assumed to contain
zeros for non-tunnel packets. The patch clarifies this behaviour
in the comments and also adds appropriate checks to the PMDs which
do not check any tunnel-related offloads before using the said fields.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Multi-process support for memif PMD.
Primary process handles connection establishment.
Secondary process queries for memory regions.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch enables need_wakeup flag for Tx and fill rings, when this
flag is set by the driver, it means that the userspace application has
to explicitly wake up the kernel Rx or kernel Tx processing by issuing
a syscall. Poll() can wake up both and sendto() or its alternatives
will wake up Tx processing only.
This feature is to provide efficient support for case that application
and driver executing on the same core.
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The API to prepare checksum offloads mistreats L4
checksum type enum values as self-contained flags.
Turning these flag checks into enum checks causes
warnings by GCC about possibly uninitialised IPv4
header pointer. The issue was found to show up in
the case of GCC versions 4.8.5 and 5.4.0, however,
it might be the case for a wider variety of other
versions. Initialise the pointer upon declaration.
and explain the reason behind this in the comment.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
It can be useful to use pcap files for some rudimental performance
testing. This patch enables this functionality in the pcap driver.
At a high level, this works by creating a ring of sufficient size to
store the packets in the pcap file passed to the application. When the
rx function for this mode is called, packets are dequeued from the ring
for use by the application and also enqueued back on to the ring to be
"received" again.
A tx_drop mode is also added since transmitting to a tx_pcap file isn't
desirable at a high traffic rate.
Jumbo frames are not supported in this mode. When filling the ring at rx
queue setup time, the presence of multi segment mbufs is checked for.
The PMD will exit on detection of these multi segment mbufs.
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The argument lists on some of the device creation functions are quite
large. Using a struct to hold the user options parsed in
'pmd_pcap_probe' will allow for cleaner function calls and definitions.
Adding user options will also be easier.
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The id values for VF stats were not being offset correctly.
And getting xstats for VF device only worked if VF device supported
it; it did not support the generic stats.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The xstats_get was not setting id correctly for each entry.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Mohsin Mazhar Shaikh <mohsinmazhar_shaikh@trendmicro.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Use the result from querying host to show the RSS info.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This is to fix the error:
```
drivers/net/mlx5/mlx5_defs.h:14:26:
error: format '%lx' expects argument of type 'long unsigned int',
but argument 5 has type 'off_t {aka long long int}' [-Werror=format=]
drivers/net/mlx5/mlx5_txq.c:569:48: note: format string is defined here
DRV_LOG(DEBUG, "port %u: uar_mmap_offset 0x%lx"
~~^
%llx
```
Which reproduces with gcc (Ubuntu 7.4.0-1ubuntu1~18.04.1) 7.4.0.
Fixes: 6bf10ab69b ("net/mlx5: support 32-bit systems")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The API to prepare checksum offloads employs outer
IP checksum flag to tell regular IPv4 packets from
tunnel packets with outer IPv4 encapsulation. This
flag cannot serve as a marker for the said purpose
because a packet can have outer IPv4 encapsulation
and may not have outer IP checksum offload request.
Fix the API by changing the said criterion to test
outer IPv4 flag rather than outer IP checksum flag.
Use simpler spelling of the conditional expression.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch add package sending and receiving function codes.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add various headers that define mgmt commands, cmdq commands
and basic defines for use in the code.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Work queue is used for cmdq and Rx/Tx buff description.
NIC business needs to configure cmdq context and txq/rxq
context. This patch adds data structures and function codes
for work queue and context.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The items of configurations and queries for NIC business include
MAC, VLAN, MTU, RSS and so on. These configurations and queries
are handled by mgmt module. This patch introduces related
data structures and function codes.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add code for hardware operation, including configuration,
query and so on.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Mgmt module is a kind of administration module for the chip.
It is responsible for handling administration command from host.
It uses api channel. This patch adds related data structures,
packaged interfaces and function codes.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Eqs include aeq and ceq. PMD supports aeq only. Aeq is a kind of
queue for mgmt asynchronous message and mgmt command response message.
This patch introduces data structures, initialization, and related
interfaces about aeq.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Microcode is named ucode in Hi1822. Its main responsibility is data
transmission and reception. But it can also handle some administration
works. It uses cmdq mechanism. This patch introduces data structures,
initialization, interfaces, and commands sending functions of cmdq.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
API command channel is for communicating with mgmt module of chip.
This patch introduces data structures, initialization, interfaces,
and commands sending functions of API command channel.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds some HW interfaces for bar operation interfaces,
including: mapped bar address getting, HW attributes getting,
msi-x reg operation, function type getting and so on.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
If we don't clear mac_addrs, ethdev will double free it on cleanup.
Fixes: e16adf08e5 ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
mac_addrs points to a field in dev_private.
We can't let ethdev free it.
Fixes: e16adf08e5 ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Clearing mac_addrs on remove will prevent ethdev from freeing it.
Fixes: 6435f9a0ac ("net/nfb: add new netcope driver")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The rte_eth_dev_close() function now handles freeing resources for
devices (e.g., mac_addrs). To conform with the new close() behaviour we
are asserting the RTE_ETH_DEV_CLOSE_REMOVE flag so that
rte_eth_dev_close() releases all device level dynamic memory.
Second level memory allocated to each individual rx/tx queue is now
freed as part of the close() operation therefore making it safe for the
rte_eth_dev_close() function to free the device private data without
orphaning the rx/tx queue pointers.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Matt Peters <matt.peters@windriver.com>
This check on Linux environment has been added at a time when we already
had switched to using the boolean RTE_EXEC_ENV_LINUXAPP.
It was then missed when converting to RTE_EXEC_ENV_LINUX.
Fixes: 7709a63bf1 ("net/softnic: add connection agent")
Fixes: 742bde12f3 ("build/linux: rename macro from LINUXAPP to LINUX")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add internal usage flag, bit 91 as described in spec.
Update width of internal queue state to 122 also as described in spec.
Signed-off-by: Ashish Shah <ashish.n.shah@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
- Add function to remove ES profile map as it is now being used in
clearing and freeing HW tables.
- Locks were initially not used for releasing ES profile maps and
flow profiles as the sequence is part of driver unload. Adding
calls to acquire and release locks to ensure that any calls made
by the VF VSI during VFR or unload do not result in memory
access violations.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
According to recent specification versions, the field in the Queue
Shutdown AdminQ command consisting of the "driver unloading" indication
is not a 4 byte field (it is byte.bit 16.0). Change it to a byte and
remove the unnecessary endian conversion.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added refresh_required flag to determine if we need to update the
recipe to profile mapping cache. This will reduce the number of
calls made to refresh the profile map.
Signed-off-by: Shivanshu Shukla <shivanshu.shukla@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Correct NVGRE header structure and its field offsets.
Fixes: 04b8ec1ea8 ("net/ice/base: add protocol structures and defines")
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A couple of places in the code use a 'sizeof(bitmap) * BITS_PER_BYTE'
construction to calculate the size of the bitmap when calling
ice_zero_bitmap. Instead of doing this, just use the same value as in
the ice_declare_bitmap declaration.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A few places in the code used ice_memset instead of ice_zero_bitmap to
initialize a bitmap to zeros.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix ice_cp_bitmap to copy the entire storage.
Fixes: c9e37832c9 ("net/ice/base: rework on bit ops")
Cc: stable@dpdk.org
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix ice_zero_bitmap to zero the entire storage.
Fixes: c9e37832c9 ("net/ice/base: rework on bit ops")
Cc: stable@dpdk.org
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In CEE mode, the TSA information can be derived from the reported
priority value.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
