The related dependency to build the PMD based on the
SDK libraries is now enabled through pkgconfig.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
This library has no maintainer and, for now, nobody expressed interest
in taking over.
Mark this experimental library as deprecated and announce plan for
removal in v23.11.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ferruh Yigit <ferruh.yigit@amd.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Makes apps configurable from meson, like already possible for drivers.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
To ensure all users are aware of KNI's deprecated status at build time,
this library is marked as a deprecated library: the library is disabled
by default. It can be re-enabled by setting disabled_libs to the empty
string (or other string not including 'kni').
The dependent NIC driver, drivers/net/kni, is disabled accordingly as it
depends on the library.
NOTE: This is part of the deprecation process for KNI agreed by the DPDK
technical board.[1]
[1] https://mails.dpdk.org/archives/dev/2022-June/243596.html
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
IOVA mode in DPDK is either PA or VA.
The new build option enable_iova_as_pa configures the mode to PA
at compile time.
By default, this option is enabled.
If the option is disabled, only drivers which support it are enabled.
Supported driver can set the flag pmd_supports_disable_iova_as_pa
in its build file.
mbuf structure holds the physical (PA) and virtual address (VA).
If IOVA as PA is disabled at compile time, PA field (buf_iova)
of mbuf is redundant as it is the same as VA
and is replaced by a dummy field.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
NVIDIA acquired Mellanox Technologies in 2020.
The DPDK documentation and code might still include instances
of or references to Mellanox trademarks (like BlueField and ConnectX)
that are now NVIDIA trademarks.
The PCI IDs and copyrights are unchanged.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gal Cohen <galco@nvidia.com>
RTE_MBUF_REFCNT_ATOMIC = 0 is not necessary for applications like
Seastar, where it's safe to assume that the mbuf refcnt is only
updated by a single core only.
Signed-off-by: Kefu Chai <tchaikov@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add an option to automatically discover the host's NUMA and CPU counts
and use those values for a non cross-build.
Give users the option to override the per-arch default values or values
from cross files by specifying them on the command line with -Dmax_lcores
and -Dmax_numa_nodes.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The current meson option 'machine' should only specify the ISA, which is
not sufficient for Arm, where setting ISA implies other settings as well
(and is used in Arm configuration as such).
Use the existing 'platform' meson option to differentiate the type of
the build (native/generic) and set ISA accordingly, unless the user
chooses to override it with a new option, 'cpu_instruction_set'.
The 'machine' option set the ISA in x86 builds and set native/default
'build type' in aarch64 builds. These two new variables, 'platform' and
'cpu_instruction_set', now properly set both ISA and build type for all
architectures in a uniform manner.
The 'machine' option also doesn't describe very well what it sets. The
new option, 'cpu_instruction_set', is much more descriptive. Keep
'machine' for backwards compatibility.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for the disable_libs option, to allow disabling the build of
particular libraries. As part of this, maintain a list of what libraries
can safely be disabled, without breaking the build - for now this list is
solely those libraries which are not built on FreeBSD, kni, power and
vhost. This list can be expanded by future patches.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Switch from using tabs to 4 spaces for meson.build indentation, for the
basic infrastructure and tooling files, as well as doc and kernel
directories.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add Arm SoC configuration sets to Arm meson.build and add an arch
agnostic meson option, 'platform', to select from these SoC
configurations for meson native builds. This is preferable to
specifying a cross file when doing aarch64 -> aarch64 builds, since the
cross file specifies the toolchain as well.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add support for enabling or disabling drivers for Arm cross build. Do
not implement any enable/disable lists yet.
Enabling drivers is useful when building for an SoC where we only want
to build a few drivers. That way the list won't be too long.
Similarly, disabling drivers is useful when we want to disable only a
few drivers.
Both of these are advantageous mainly in aarch64 -> aarch64 (or arch ->
same arch) builds, where the build machine may have the required driver
dependencies, yet we don't want to build drivers for a specific SoC.
If enable_drivers is a non-empty list, build only those drivers,
otherwise build all drivers and add them to enable_drivers. If
disable_drivers is non-empty list, build all drivers specified in
enable_drivers except those in disable_drivers.
There are two drivers, bus/pci and bus/vdev, which break the build if
not enabled. Address this by always enabling these if the user disables
them or doesn't specify in their allowlist.
Also remove the old Makefile arm configuration options which don't do
anything in Meson.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The current machine='default' build name is not descriptive. The actual
default build is machine='native'. Add an alternative string which does
the same build and better describes what we're building:
machine='generic'. Leave machine='default' for backwards compatibility.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
To allow support for additional build checks and tests only really
relevant for developers, we add support for a developer mode option to
DPDK. The default, "auto", value for this enables developer mode if a
".git" folder is found at the root of the source tree - as was the case
with the previous "make" build system. There is also support for
explicitly enabling or disabling this option using "meson configure" if
so desired.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Introduce a meson option 'enable_driver_sdk', when true installs internal
driver headers for ethdev. This allows drivers that do not depend on
stable api/abi to be built external to the dpdk source tree.
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The KNI linux module is using a custom target for building, which
doesn't take into account any cross compilation arguments. The arguments
in question are ARCH, CROSS_COMPILE (for gcc, clang) and CC, LD (for
clang). Get those from the cross file and pass them to the custom
target.
The user supplied path may not contain the 'build' directory, such as
when using cross-compiled headers, so only append that in the default
case (when no path is supplied in native builds) and use the unmodified
path from the user otherwise. Also modify the install path accordingly.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
AMD CPU can present a high number of NUMA nodes.
On a dual-socket with 16 CCXs per CPU,
the option "CCX (or LLC) as NUMA domain" will expose 32 NUMA nodes.
The DPDK default should be 32 for better compatibility.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Asaf Penso <asafp@nvidia.com>
To verify that all DPDK headers are ok for inclusion directly in a C file,
and are not missing any other pre-requisite headers, we can auto-generate
for each header an empty C file that includes that header. Compiling these
files will throw errors if any header has unmet dependencies.
For some libraries, there may be some header files which are not for direct
inclusion, but rather are to be included via other header files. To allow
later checking of these files for missing includes, we separate out the
indirect include files from the direct ones.
To ensure ongoing compliance, we enable this build test as part of the
default x86 build in "test-meson-builds.sh".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
With pkg-config support available within musdk library
(from musdk-release-SDK-10.3.5.0-PR2 version),
meson option 'lib_musdk_dir' can be removed.
PKG_CONFIG_PATH environment variable should be set appropriately
to use the musdk library.
docs are updated with new musdk version and meson instructions.
Signed-off-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With pkg-config support available within AArch64crypto library,
meson option 'armv8_crypto_dir' can be removed.
PKG_CONFIG_PATH environment variable should be set appropriately
to use the crypto library.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Define the public API for trace support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the trace subsystem.
The 8 bytes tracepoint object is a global variable, and can be used in
fast path. Created a new __rte_trace_point section to store the
tracepoint objects as,
- It is a mostly read-only data and not to mix with other "write"
global variables.
- Chances that the same subsystem fast path variables come in the same
fast path cache line. i.e, it will enable a more predictable
performance number from build to build.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The libibverbs (and libmlx4/5) can be statically embedded
in the shared PMD library, or in the application with the static PMD.
It was supported with make build system in
commit 2c0dd7b69f ("config: add static linkage of mlx dependency").
The same feature is enabled with meson when using pkg-config
(i.e. only if the call to dependency() is successful).
The fallback method for searching library with cc.find_library()
is not supported because the dependencies of the found library
would not be linked (no such info in .a file unlike .so).
The main difference, in meson build system, is the generated .pc file
giving arguments to link DPDK with the application.
Unfortunately the .pc file will not keep memory of the static linkage
option for libibverbs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
As per new ABI policy [1], all of the libraries are now versioned using
one global ABI version. Stable libraries use the MAJOR.MINOR ABI
version for their shared objects, while experimental libraries
use the 0.MAJORMINOR convention for their versioning.
Experimental library versioning is managed globally. Changes in this
patch implement the necessary steps to enable that.
The CONFIG_RTE_MAJOR_ABI option was introduced to permit multiple
DPDK versions installed side by side. The problem is now addressed
through the new ABI policy, and thus can be removed.
[David] For external libraries relying on Makefile, LIBABIVER is
preserved to avoid using DPDK global ABI version.
[1] https://doc.dpdk.org/guides/contributing/abi_policy.html
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The meson option has been missed when removing this code.
Fixes: 8e35792c53 ("eal: remove dead code on NUMA node detection")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for a new build option to turn off certain drivers. Any other
drivers which depend on the one being disabled will also be disabled with a
suitable debug message.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Turbo_sw PMD driver now building with meson/ninja
with or without SDK libraries.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently kernel modules are installed into /usr/src instead of
/lib/modules when meson build system is used. This patch fixes that.
Cc: stable@dpdk.org
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
max_ethports was merged after the other patch was written:
e04ea7fcf0 ("build: use integers for numerical options")
So convert this one too like the others have already been.
Fixes: d5555fc900 ("build: add option to override max ethdev ports")
Signed-off-by: Luca Boccassi <bluca@debian.org>
Now that the minimum Meson version has been bumped past 0.45 we can use
integer as an option type directly.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Sort the options alphabetically and make a note of the preferred
order at the top of the file.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Allow users and packagers to override the default RTE_MAX_ETHPORTS.
This adds a new meson option, max_ethports which defaults to the
current value.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Rename options CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS and
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS to a single option
CONFIG_RTE_IBVERBS_LINK_DLOPEN.
Rename meson option enable_driver_mlx_glue to ibverbs_link.
There was no good reason for setting a different link option
for mlx4 and mlx5. Having a single common option makes it
easier to understand and unify make and meson systems.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Allow users and packagers to override the default dpdk/drivers
subdirectory where the PMDs get installed under $lib.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Timothy Redaelli <tredaelli@redhat.com>
Compile Mellanox driver when its external dependencies are met. A
glue version of the driver can still be requested by using the
-Denable_driver_mlx_glue=true
Meson will try to find the required external libraries. When they are
not installed system wide, they can be provided though CFLAGS, LDFLAGS
and LD_LIBRARY_PATH environment variables, example (considering
RDMA-Core is installed in /tmp/rdma-core):
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
meson output
# LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
ninja -C output install
Note: LD_LIBRARY_PATH before ninja is necessary when the meson
configuration has changed (e.g. meson configure has been called), in
such situation the LD_LIBRARY_PATH is necessary to invoke the
autoconfiguration script.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Install in $kerneldir/../extra/dpdk. Usually $kerneldir should something
like: /lib/modules/$kver/build, so this directory will match the default
one used by legacy makefiles.
Fixes: a52f4574f7 ("igb_uio: build with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for building MRVL MVPP2 PMD with meson. To avoid cluttering
the build environment and to keep all relevant settings local to a cross
build we get MUSDK library installation path from a meson option.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables the test/test app to be built. It also adds
the test binary to be a meson-test, which allows the meson test
infrastructure to be used to run tests.
Tests are listed using the same test binary, however each test
sets a different DPDK_TEST environment variable. The string contents
of this DPDK_TEST env var is entered in the command line interface.
As such, the familiar test names such as "ring_perf_autotest" etc
are valid tests to run using this meson test infrastructure.
Note that the tests are run serially, given that we cannot run
multiple primary processes at a time. As each test must initialize
EAL this takes some time depending on the number of hugepages.
In future, we could improve this to run multiple tests from one
EAL init, but it is out of scope for this patchset.
Finally, an option to build the tests is added to the meson build
options. When disabled, the unit test code in test/test is not
compiled. The default is set to 'true'. To disable, run:
$ meson configure -Dtests=false
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add support for having selected example apps built as part of a meson,
ninja build. By default none are built, and those to be built should be
named directly in the -Dexamples='' meson configuration argument.
This is useful for developers working on a feature who want to use a
suitable example, or examples, to test that feature, as they can compile
everything up in one go, and run the example without having to do a ninja
install first.
This commit adds examples which don't consist of multiple apps in
subdirectories to the meson build, so they can be built by default by
passing -Dexamples parameter to meson.
Not included are the following examples:
* ethtool
* multi-process
* netmap_compat
* performance-thread
* quota_watermark
* server_node_efd
* vm_power_manager
To test the apps added here, use the following command, merged to one line,
to add them to your meson build (command to be run inside the build
directory):
meson configure -Dexamples=bbdev_app,bond,cmdline,distributor,\
eventdev_pipeline_sw_pmd, exception_path,helloworld,\
ip_fragmentation,ip_pipeline,ip_reassembly, ipsec-secgw,\
ipv4_multicast,kni,l2fwd-cat,l2fwd-crypto,l2fwd-jobstats,\
l2fwd-keepalive,l2fwd,l3fwd-acl,l3fwd-power,l3fwd-vf,l3fwd,\
link_status_interrupt,load_balancer,packet_ordering,ptpclient,\
qos_meter,qos_sched,rxtx_callbacks,skeleton,tep_termination,\
timer,vhost,vhost_scsi,vmdq,vmdq_dcb
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Wrap each entry at the description value to avoid really long lines also.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
A subset of the dpdk headers are arch-dependent, but have common names
and thus cause a clash in a multiarch installation.
For example, rte_config.h is different for each target.
Add a "include_subdir_arch" option to allow a user to specify a
subdirectory for arch independent headers to fix multiarch support.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Normally, each library has it's own version number based on the ABI.
Add an option to have all libs just use the DPDK version number as the
.so version.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Support building igb_uio using meson and ninja. For this, we still use the
kernel's kbuild system, by calling out to make, since it's safer and easier
than trying to reproduce that in meson. A list of suitable file
dependencies is given so that we have a reasonable chance of a rebuild when
necessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
To build with meson and ninja, we need some initial infrastructure in
place. The build files for meson always need to be called "meson.build",
and options get placed in meson_options.txt
This commit adds a top-level meson.build file, which sets up the global
variables for tracking drivers, libraries, etc., and then includes other
build files, before finishing by writing the global build configuration
header file and a DPDK pkgconfig file at the end, using some of those same
globals.
From the top level build file, the only include file thus far is for the
config folder, which does some other setup of global configuration
parameters, including pulling in architecture specific parameters from an
architectural subdirectory. A number of configuration build options are
provided for the project to tune a number of global variables which will be
used later e.g. max numa nodes, max cores, etc. These settings all make
their way to the global build config header "rte_build_config.h". There is
also a file "rte_config.h", which includes "rte_build_config.h", and this
file is meant to hold other build-time values which are present in our
current static build configuration but are not normally meant for
user-configuration. Ideally, over time, the values placed here should be
moved to the individual libraries or drivers which want those values.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
