The GRO/GSO library doesn't re-calculate checksums for
merged/fragmented packets. If users want the packets to
have correct IP checksums, they should select HW IP
checksum calculation for the port which the packets are
transmitted to. But if the port doesn't support HW IP
checksum, users may perform a SW IP checksum.
Fixes: b7091f1dcf ("app/testpmd: enable the heavyweight mode TCP/IPv4 GRO")
Fixes: 52f38a2055 ("app/testpmd: enable TCP/IPv4 VxLAN and GRE GSO")
Cc: stable@dpdk.org
Signed-off-by: Wenwu Ma <wenwux.ma@intel.com>
Reviewed-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Starting or stopping a bonded port also starts or stops all active slaves
under the bonded port. If this port is a bonded device, we need to modify
the port status of all slaves.
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
- move RSA padding into separate struct.
More padding members should be added into padding,
therefore having separate struct for padding parameters will
make this more readable.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
- Moved DH operation type to DH operation struct.
Operation type (PUBLIC_KEY_GENERATION, SHARED_SECRET) should
be free to choose for any operation. One xform/session should
be enough to perform both DH operations, if op_type would be xform
member, session would have to be created twice for the same
group. Similar problem would be observed in sessionless case.
Additionally, it will help extend DH to support Elliptic Curves.
- Changed order of Diffie-Hellman operation phases.
Now it corresponds with the order of operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
- Separated key exchange enum from asym op type.
Key exchange and asymmetric crypto operations like signatures,
encryption/decryption should not share same operation enum as
its use cases are unrelated and mutually exclusive.
Therefore op_type was separate into:
1) operation type
2) key exchange operation type
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Allowing auth generation followed by encryption mode.
--optype auth-then-cipher can take cipher-op as encrypt
and auth-op as generate now.
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
FLR timeout register is not used in 5GNR FPGA.
Signed-off-by: Hernan Vargas <hernan.vargas@intel.com>
Reviewed-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch supports raw buffer APIs testing for
PDCP test cases.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
PMD name for DPAA raw buffer crypto driver test cases is
updated with correct name.
Fixes: cd8166c28c ("test/crypto: add raw API test for dpaax")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Patch adds unit tests for IPv6 flow label set & copy
operations.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added cases to test anti replay for inline IPsec processing
with and without extended sequence number support.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added more inline IPsec functional verification cases.
These cases do not have known vectors but are verified
using encap + decap test for all the algo combinations.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added unit test cases for IP reassembly of inline IPsec
inbound scenarios.
In these cases, known test vectors of fragments are first
processed for inline outbound processing and then received
back on loopback interface for inbound processing along with
IP reassembly of the corresponding decrypted packets.
The resultant plain text reassembled packet is compared with
original unfragmented packet.
In this patch, cases are added for 2/4/5 fragments for both
IPv4 and IPv6 packets. A few negative test cases are also added
like incomplete fragments, out of place fragments, duplicate
fragments.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added combined encap and decap test cases for various algorithm
combinations
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added test cases for inline Inbound protocol offload
verification with known test vectors from Lookaside mode.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
A new test suite is added in test app to test inline IPsec protocol
offload. In this patch, predefined vectors from Lookaside IPsec test
are used to verify the IPsec functionality without the need of
external traffic generators. The sent packet is loopbacked onto the same
interface which is received and matched with the expected output.
The test suite can be updated further with other functional test cases.
In this patch encap only cases are added.
The testsuite can be run using:
RTE> inline_ipsec_autotest
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Test eventdev app is updated to add new option for asymmetric
crypto ops for event crypto adapter.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Test app is updated to add cases for asymmetric crypto
sessions for event crypto adapter.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Used the new API rte_cryptodev_set_session_event_mdata to set
event crypto metadata from the applications (app/test and
app/test-eventdev) instead of using session userdata.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Check if the returned op is NULL because of failure,
before using it and causing a segmentation fault.
Fixes: 4c99481f49 ("app/test: add ZUC")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
According to RFC791,the options may appear or not in datagrams.
They must be implemented by all IP modules (host and gateways).
What is optional is their transmission in any particular datagram,
not their implementation. So we have to deal with it during the
fragmenting process.
Add some test data for the IPv4 header optional field fragmenting.
Signed-off-by: Huichao Cai <chcchc88@163.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Within ACL rule IPv6 address can be represented in different ways:
either as 4x4B fields, or as 2x8B fields.
Till now, only first format was supported.
Extend test-acl to support both formats, mainly for testing and
demonstrating purposes.
To control desired behavior '--ipv6' command-line option is extended
to accept an optional argument:
To be more precise:
'--ipv6' - use 4x4B fields format (default behavior)
'--ipv6=4B' - use 4x4B fields format (default behavior)
'--ipv6=8B' - use 2x8B fields format
Also replaced home brewed IPv4/IPv6 address parsing with inet_pton() calls.
Signed-off-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
Current pmd_perf_autotest() in continuous mode tries
to enqueue MAX_TRAFFIC_BURST completely before starting
the test. Some drivers cannot accept complete
MAX_TRAFFIC_BURST even though rx+tx desc count can fit it.
This patch changes behaviour to stop enqueuing after few
retries.
Fixes: 002ade70e9 ("app/test: measure cycles per packet in Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@marvell.com>
Forcing inlining in test_ring_enqueue and test_ring_dequeue can cause
the compiled code to grow extensively when compiled with no optimization
(-O0 or -Og). This is default in the meson's debug configuration. This
can collide with compiler bugs and cause issues during linking of unit
tests where the api_type or esize are non-const variables causing
inlining cascade. In perf tests this is not the case in perf-tests as
esize and api_type are const values.
One such case was discovered when porting DPDK to RISC-V. GCC 11.2 (and
no fix still in 12.1) is generating a short relative jump instruction
(J <offset>) for goto and for loops. When loop body grows extensively in
ring test, the target offset goes beyond supported offfset of +/- 1MB
from PC. This is an obvious bug in the GCC as RISC-V has a
two-instruction construct to jump to any absolute address (AUIPC+JALR).
However there is no reason to force inlining as the test code works
perfectly fine without it.
GCC has a bug report for a similar case (with conditionals):
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93062
Fixes: a9fe152363 ("test/ring: add custom element size functional tests")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
Establish unit test for testing thread api. Initial unit tests
for rte_thread_{get,set}_affinity_by_id().
Signed-off-by: Narcisa Vasile <navasile@linux.microsoft.com>
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Added test cases to test changing of queue QoS attributes priority,
weight and affinity at runtime.
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Quiesce event ports used by the workers core on exit to free up
any outstanding resources.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Event ports are configured to implicitly release the scheduler contexts
currently held in the next call to rte_event_dequeue_burst().
A worker core might still hold a scheduling context during exit, as the
next call to rte_event_dequeue_burst() is never made.
This might lead to deadlock based on the worker exit timing and when
there are very less number of flows.
Add clean up function to release any scheduling contexts held by the
worker by using RTE_EVENT_OP_RELEASE.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Remove rte_*_dev calls from signal handler callback as signal handlers
are supposed to be light weight.
Split ethdev teardown into Rx and Tx sections, wait for
workers to finish processing after disabling Rx to allow workers
to complete processing currently held packets.
Verified SW event device on ARM64 using the following command:
./build/app/dpdk-test-eventdev -l 7-23 -s 0xf00 --vdev=event_sw0
-a 0002:02:00.0 -- --prod_type_ethdev --nb_pkts=0 --verbose 2
--test=pipeline_queue --stlist=o --wlcores 16-23
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The macro RTE_ETHER_MIN_LEN isn't the minimum value of MTU. But testpmd
used it when execute 'port config mtu 0 xx' cmd. This patch fixes it.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
In function 'fwd_stats_display', if function 'rte_eth_stats_get' fails,
'stats' is uncertainty value. The display result will be abnormal.
This patch check the return value of 'rte_eth_stats_get' to avoid
display abnormal stats.
Fixes: 53324971a1 ("app/testpmd: display/clear forwarding stats on demand")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Enable ASan, this can greatly help identify leaks and buffer overflows.
Running unit tests relying on multiprocess is unreliable with ASan
enabled, so skip them.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
As described in bugzilla, ASan reports accesses to all memory segment as
invalid, since those parts have not been allocated with rte_malloc.
Move __rte_no_asan to rte_common.h and disable ASan on a part of the test.
Bugzilla ID: 880
Fixes: 6cc51b1293 ("mem: instrument allocator for ASan")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
In hash_readwrite_perf_autotest a single read and write operation is
benchmarked for both HTM and non HTM cases. However the result summary
only shows the HTM value. Therefore add the non HTM value for
completeness.
Fixes: 0eb3726ebc ("test/hash: add test for read/write concurrency")
Signed-off-by: Stanislaw Kardach <kda@semihalf.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
Added test vector file for AES-128-GCM for
64B and 512B length buffers.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
For decrypt, ICV mismatch can come as data is dummy and
latency will be calculated for error path. Hence populate
mbuf with test vector data.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Extended support for asymmetric crypto perf throughput test.
Added support for new modulus lengths.
Added new parameter --modex-len.
Supported lengths are 60, 128, 255, 448. Default length is 128.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added tunnel and transport AH known test vectors for
SHA256 HMAC.
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Added auth only and null cipher + auth under combined mode
for following combinations.
1. Tunnel IPv4
2. Transport IPv4
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
test_bpf_convert is being conditionally registered depending on the
presence of RTE_HAS_LIBPCAP except the UT unconditionally lists it as a
test to run.
When the UT runs test_bpf_convert test-dpdk can't find the registration
and assumes the DPDK_TEST environment variable hasn't been defined
resulting in test-dpdk dropping to interactive mode and subsequently
waiting for the remainder of the UT fast-test timeout period before
reporting the test as having timed out.
* unconditionally register test_bpf_convert,
* if ! RTE_HAS_LIBPCAP provide a stub test_bpf_convert that reports the
test is skipped similar to that done with the test_bpf test.
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Cc: stable@dpdk.org
Signed-off-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Testpmd reads flex item configuration from a JSON file.
Flex item input link description is stored in testpmd
flow item format. For example, `eth type is 0x0800`.
The item description is placed into a general testpmd CLI
flow rule command template and parsed to convert string into
flow item object.
The patch adds the `actions` section to the flow rule template.
Fixes: 59f3a8acbc ("app/testpmd: add flex item commands")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
GTP header can be followed by an optional 32 bits extension.
GTP notifies about the extension presence through the E, S or PN
header bits.
Csum GTP header parser did not check the extension bits value.
The patch updates GTP header length if at-least one of the
extension bits is set.
Fixes: d8e5e69f3a ("app/testpmd: add GTP parsing and Tx checksum offload")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Replaced using strtoul with strtoull when converting to
64-bit mask field.
In Windows strtoul returns 32-bit values which cause an
issue with show RSS RETA.
Fixes: 66c594904a ("ethdev: support multiple sizes of redirection table")
Cc: stable@dpdk.org
Signed-off-by: Adham Masarwah <adham@nvidia.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Testpmd forwards packets in checksum mode that it needs to calculate
the checksum of each layer's protocol.
In process_inner_cksums, when parsing tunnel packets, inner L4 offset
should be outer_l2_len + outer_l3_len + l2_len + l3_len.
In process_outer_cksums, when parsing tunnel packets, outer L4 offset
should be outer_l2_len + outer_l3_len.
Fixes: e6b9d6411e ("app/testpmd: add SW L4 checksum in multi-segments")
Cc: stable@dpdk.org
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Aman Singh <aman.deep.singh@intel.com>
Depending on number of jobs specified on command line, part of the
data buffer may not get searched, resulting in incorrect number of
matches being reported.
Additional change to ensure the "All Matches" summary outputs the
correct match start locations in the supplied data buffer.
Fixes: de06137cb2 ("app/regex: add RegEx test application")
Cc: stable@dpdk.org
Signed-off-by: Gerry Gribbon <ggribbon@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Currently dumpcap tries to initialize dpdk before parsing command line
arguments, this makes it impossible to check version or help without
having the primary process running already.
Signed-off-by: Ben Magistro <koncept1@gmail.com>
If the rte_eth_promiscuous_enable() fails, then log the error
and continue.
Coverity issue: 373662
Fixes: cbb44143be ("app/dumpcap: add new packet capture application")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
