Cross compiling DPDK for BE mode on ARM results into errors
"PMDINFO portal/dpaa2_hw_dpio.o.pmd.c No drivers registered"
The original code assumes the sh_size to be 32 bit, while it can
be Elf32_Word or Elf64_Xword based on 32bit or 64 bit systems.
This patches replaces the sh_size conversion routines to use ADDR_SIZE
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Cc: stable@dpdk.org
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In func locate_pmd_entries(), pointer 'new' returned from call to func
'calloc' may be NULL. It is dereferenced without null point check.
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
This commit zeros out the elf_info struct at startup of the
pmdinfogen code. If it is not zeroed, later in the code gcc
produces "may be unused" prints. Clang does not report any
issue.
This issue is only observed when compiling pmdinfogen as an
optimized build, hence this warning is not disabled in the
existing Makefile.
This commit enables a simplification in the meson build
system, removing the requirement for "-Wno-maybe-uninitialized".
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Coverity reports a forward null dereference from a for loop
that works with a variable previously tested for null that had no error
handling or condition to prevent it. Pretty obvious fix below.
Coverity issue: 139593
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
pmdinfogen has a bug in which, during build, it pulls in rte_byteorder.h to
obtain the rte macros for byteswapping between the cpu byte order and big or
little endian. Unfortunately, pmdinfogen is a tool that is only meant to be run
during the build of dpdk components, and so, it runs on the host. In cross
compile environments however, the rte_byteorder.h is configured using a target
cpu, who's endianness may differ from that of the host, leading to improper
swapping.
The fix is to use host system defined byte swapping routines rather than the
dpdk provided routines. Note that we are using non posix compliant routines, as
the posix compliant api only addresses 16 and 32 bit swaps, and we also need 64
bit swaps. Those macros exist (via endian.h), but BSD and Linux put that header
in different locations so some ifdeffery is required.
Tested successfully by myself on Linux and BSD systems.
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Compile error:
CC mlx5.o.pmd.o
mlx5.o.pmd.c:1:227:
error: no newline at end of file [-Werror,-Wnewline-eof]
...__attribute__((used)) = "PMD_INFO_STRING= {...}";
^
Produced with clang 3.8.0 and MLX5_PMD and MLX5_DEBUG
config options enabled.
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The following tools may be installed system-wide.
It may be cleaner and more convenient to find them with the same
dpdk- prefix (especially for autocompletion).
Moreover, the script dpdk_nic_bind.py deserves a new name because it is
not restricted to NICs and can be used for e.g. crypto.
These files are renamed:
pmdinfogen -> dpdk-pmdinfogen
pmdinfo.py -> dpdk-pmdinfo.py
dpdk_pdump -> dpdk-pdump
dpdk_proc_info -> dpdk-procinfo
dpdk_nic_bind.py -> dpdk-devbind.py
setup.sh -> dpdk-setup.sh
The tools pmdinfogen, pmdinfo.py and dpdk_pdump are new in 16.07.
The scripts dpdk_nic_bind.py and setup.sh may have been used with
previous releases by end users. That's why a symbolic link still
provide the old name in the installed tools directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
error on compilation caused by missing include for libgen.h.
buildtools/pmdinfogen/pmdinfogen.c:402:4: error:
implicit declaration of function 'basename' is invalid in C99
basename(argv[0]));
Fixes: 840e5dfea3 ("pmdinfogen: fix usage message")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The name of the tool is pmdinfogen.
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When compiled with a standard clang, pmdinfogen can raise a warning:
buildtools/pmdinfogen/pmdinfogen.c:365:1: warning:
control reaches end of non-void function
Actually there can be more warnings with stricter compilers.
In order to catch them early and fix most of them, the DPDK standard flags
WERROR_FLAGS are used.
The warnings fixed are:
no previous prototype for ...
no return statement in function returning non-void
variable ‘secstrings’ set but not used
‘sec_name’ defined but not used
‘get_symbol_index’ defined but not used
pointer of type ‘void *’ used in arithmetic
Fixes: 98b0fdb0ff ("pmdinfogen: add buildtools and pmdinfogen utility")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
pmdinfogen is a tool used to parse object files and build json strings for
use in later determining hardware support in a dso or application binary.
pmdinfo looks for the non-exported symbol names this_pmd_name<n> and
this_pmd_tbl<n> (where n is a integer counter). It records the name of
each of these tuples, using the later to find the symbolic name of the
pci_table for physical devices that the object supports. With this
information, it outputs a C file with a single line of the form:
static char *<pmd_name>_driver_info[] __attribute__((used)) = " \
PMD_DRIVER_INFO=<json string>";
Where <pmd_name> is the arbitrary name of the pmd, and <json_string> is the
json encoded string that hold relevant pmd information, including the pmd
name, type and optional array of pci device/vendor ids that the driver
supports.
This c file is suitable for compiling to object code, then relocatably
linking into the parent file from which the C was generated. This creates
an entry in the string table of the object that can inform a later tool
about hardware support.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
