There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Currently, most ethdev callback API use queue ID as parameter, but Rx
and Tx queue release callback use queue object which is used by Rx and
Tx burst data plane callback.
To align with other eth device queue configuration callbacks:
- queue release callbacks are changed to use queue ID
- all drivers are adapted
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Definition of `rte_ether_addr` structure used a workaround allowing DPDK
and Windows SDK headers to be used in the same file, because Windows SDK
defines `s_addr` as a macro. Rename `s_addr` to `src_addr` and `d_addr`
to `dst_addr` to avoid the conflict and remove the workaround.
Deprecation notice:
https://mails.dpdk.org/archives/dev/2021-July/215270.html
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Start a new release cycle with empty release notes.
The ABI version becomes 22.0.
The map files are updated to the new ABI major number (22).
The ABI exceptions are dropped and CI ABI checks are disabled because
compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
There is already a break above for the case "count >= 1", so at this
stage 'count' should be always '0'.
Fixes: 1a85922369 ("net/avp: add device configuration")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Steven Webster <steven.webster@windriver.com>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
A lot of drivers export headers, reproduce the same facility than for
libraries.
Note: this change fixes an issue with the crypto scheduler headers which
were not installed properly. A separate backport will be sent to stable
branches.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The secondary processes are not allowed to release shared resources.
Only process-private resources should be freed in a secondary process.
Most of the time, there is no process-private resource,
so the close operation is just forbidden in a secondary process.
After adding proper check in the port close functions,
some redundant checks in the device remove functions are dropped.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The temporary flag RTE_ETH_DEV_CLOSE_REMOVE is removed.
It was introduced in DPDK 18.11 in order to give time for PMDs to migrate.
The old behaviour was to free only queues when closing a port.
The new behaviour is calling rte_eth_dev_release_port() which does
three more tasks:
- trigger event callback
- reset state and few pointers
- free all generic port resources
The private port resources must be released in the .dev_close callback.
The .remove callback should:
- call .dev_close callback
- call rte_eth_dev_release_port()
- free multi-port device shared resources
Despite waiting two years, some drivers have not migrated,
so they may hit issues with the incompatible new behaviour.
After sending emails, adding logs, and announcing the deprecation,
the only last solution is to declare these drivers as unmaintained:
ionic, liquidio, nfp
Below is a summary of what to implement in those drivers.
* The freeing of private port resources must be moved
from the ".remove(device)" function to the ".dev_close(port)" function.
* If a generic resource (.mac_addrs or .hash_mac_addrs) cannot be freed,
it must be set to NULL in ".dev_close" function to protect from
subsequent rte_eth_dev_release_port() freeing.
* Note 1:
The generic resources are freed in rte_eth_dev_release_port(),
after ".dev_close" is called in rte_eth_dev_close(), but not when
calling ".dev_close" directly from the ".remove" PMD function.
That's why rte_eth_dev_release_port() must still be called explicitly
from ".remove(device)" after calling the ".dev_close" PMD function.
* Note 2:
If a device can have multiple ports, the common resources must be freed
only in the ".remove(device)" function.
* Note 3:
The port is supposed to be in a stopped state when it is closed.
If it is not the case, it is free to the PMD implementation
how to react when trying to close a non-stopped port:
either try to stop it automatically or just return an error.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
gcc 10.0.1 reports:
../drivers/net/avp/avp_ethdev.c: In function ‘avp_xmit_scattered_pkts’:
../drivers/net/avp/avp_ethdev.c:1791:24:
warning: ‘avp_bufs[count]’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
1791 | tx_bufs[i] = avp_bufs[count];
| ~~~~~~~~^~~~~~~
../drivers/net/avp/avp_ethdev.c:1791:24:
warning: ‘avp_bufs[count]’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
Fix by initializing the array.
Fixes: 295abce2d2 ("net/avp: add packet transmit functions")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Steven Webster <steven.webster@windriver.com>
There is a common macro __rte_packed for packing structs,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There is a common macro __rte_aligned for alignment,
which is now used where appropriate for consistency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Remove setting ALLOW_EXPERIMENTAL_API individually for each Makefile and
meson.build. Instead, enable ALLOW_EXPERIMENTAL_API flag across app, lib
and drivers.
This changes reduces the clutter across the project while still
maintaining the functionality of ALLOW_EXPERIMENTAL_API i.e. warning
external applications about experimental API usage.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.
Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.
When correct return status is unclear from driver code, -EAGAIN is used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace rte_intr_enable() with rte_intr_ack() API
for acking an interrupt in interrupt handlers and
rx_queue_intr_enable() callbacks of PMD's.
This is inline with original intent of this change in PMDs
to ack interrupts after handling is completed if
device is backed by UIO, IGB_UIO or VFIO(with INTx).
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Tested-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The rte_eth_dev_close() function now handles freeing resources for
devices (e.g., mac_addrs). To conform with the new close() behaviour we
are asserting the RTE_ETH_DEV_CLOSE_REMOVE flag so that
rte_eth_dev_close() releases all device level dynamic memory.
Second level memory allocated to each individual rx/tx queue is now
freed as part of the close() operation therefore making it safe for the
rte_eth_dev_close() function to free the device private data without
orphaning the rx/tx queue pointers.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Matt Peters <matt.peters@windriver.com>
Transmit errors must not be reported in q_errors[] which is for
reception.
Fixes: 5a5abe2de9 ("net/avp: add device statistics operations")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Disabled avp build in FreeBSD because it is not supported.
Added changes to enable avp build if it is Linux OS and
disable in FreeBSD.
Fixes: ed71204dd0 ("net/avp: add to meson build")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.
It is probably fixing some memory leaks for PMDs which were
not freeing all data.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
When compiling with meson, extra warnings are enabled about casting from
integers to different size pointers. This triggers an error in AVP as the
addition of the offset to the pointer address causes the result to be a
64-bit integer which doesn't fit a 32-bit pointer. The fix here is to
explicitly indicate that the offset is of type "uintptr_t" which prevents
any promotion which would cause errors.
Fixes: c0ad584222 ("net/avp: add device initialization")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The drivers avp, bnx2x and liquidio were using the helper function
rte_eth_dev_pci_allocate() and can be replaced by
rte_eth_dev_pci_generic_probe() which calls the former.
Fixes: dcd5c8112b ("ethdev: add PCI driver helpers")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
As per the following commit the AVP files maintained by Wind River are
converted to use the SPDX license tag format.
commit a4862c9e1a ("license: introduce SPDX identifiers")
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This change updates the AVP driver to conform with the new ethdev
offload API. As per these commits:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")'
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")'
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
This commit aligns the names for dynamic logging with
the newly defined logging format.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
