Since switched to kernel dynamic debugging it is possible to remove
compile time debug log configuration.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This code provides the initial implementation of the libcrypto
poll mode driver. All cryptography operations are using Openssl
library crypto API. Each algorithm uses EVP_ interface from
openssl API - which is recommended by Openssl maintainers.
This patch adds libcrypto poll mode driver support to librte_cryptodev
library.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms ZUC EEA3 and EIA3
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_ZUC_EEA3
- RTE_CRYPTO_SYM_AUTH_ZUC_EIA3
The ZUC hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
And add read memory barrier to avoid status inconsistency
between two Rx descriptors readings.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
remove vhost-cuse code, including the eventfd_link kernel module that
is for vhost-cuse only.
The lib/virt/qemu-wrap.py is also removed, as it's mainly for vhost-cuse
usage.
As we have one vhost implementation now, one vhost config option is
needed only. Thus, CONFIG_RTE_LIBRTE_VHOST_USER is removed.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds port for ACL library in ppc64le.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds ppc64le port for LPM library in DPDK.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Following discussions on the mailing list [1] and since nobody stood up to
implement the necessary cleanups, here is the ivshmem integration removal.
There is not much to say about this patch, a lot of code is being removed.
The default configuration file for packet_ordering example is replaced with
the "native" x86 file.
The only tricky part is in eal_memory with the memseg index stuff.
More cleanups can be done after this but will come in subsequent patchsets.
[1]: http://dpdk.org/ml/archives/dev/2016-June/040844.html
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
With current config structure, all configuration parameters put into
common_base with a default value, and overwritten in environment file
if required, CONFIG_RTE_VIRTIO_USER is missing in common_base.
This fix is simple, by adding CONFIG_RTE_VIRTIO_USER=n as the default
macro value.
Fixes: ce2eabdd43 ("net/virtio-user: add virtual device")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Inline TX will be fully managed by the PMD after Verbs is bypassed in the
data path. Remove the current code until then.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There is no scatter/gather support anymore, CONFIG_RTE_LIBRTE_MLX5_SGE_WR_N
has no purpose and can be removed.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
- Add device id to the PCI table
- Add polling for the slowpath events for CMT mode device
- Add prerequisites to allow 100g mode
* Min number of queues needed is 2
* Only even number of queues are allowed
- Update documentation
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Introduce driver initialization and enable build infrastructure for
nicvf pmd driver.
By default, It is enabled only for defconfig_arm64-thunderx-*
config as it is an inbuilt NIC device.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Signed-off-by: Kamil Rytarowski <kamil.rytarowski@caviumnetworks.com>
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Signed-off-by: Slawomir Rosek <slawomir.rosek@semihalf.com>
Signed-off-by: Radoslaw Biernacki <rad@semihalf.com>
This patch adds the initial skeleton for bnxt driver along with the
nic guide, and ties the driver into the build system.
At this point, the driver simply fails init.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Reviewed-by: David Christensen <david.christensen@broadcom.com>
[Release Note Addition]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Use ARM NEON intrinsic to implement ixgbe vPMD
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[style fixes as highlighted by checkpatch.pl]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
By default, the mempool ops used for mbuf allocations is a multi
producer and multi consumer ring. We could imagine a target (maybe some
network processors?) that provides an hardware-assisted pool
mechanism. In this case, the default configuration for this architecture
would contain a different value for RTE_MBUF_DEFAULT_MEMPOOL_OPS.
Signed-off-by: David Hunt <david.hunt@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Added new SW PMD which makes use of the libsso_kasumi SW library,
which provides wireless algorithms KASUMI F8 and F9
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_KASUMI_F8
- RTE_CRYPTO_SYM_AUTH_KASUMI_F9
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
The librte_pdump library provides a framework for
packet capturing in dpdk. The library provides set of
APIs to initialize the packet capture framework, to
enable or disable the packet capture, and to uninitialize
it.
The librte_pdump library works on a client/server model.
The server is responsible for enabling or disabling the
packet capture and the clients are responsible
for requesting the enabling or disabling of the packet
capture.
Enabling APIs are supported with port, queue, ring and
mempool parameters. Applications should pass on this information
to get the packets from the dpdk ports.
For enabling requests from applications, library creates the client
request containing the mempool, ring, port and queue information and
sends the request to the server. After receiving the request, server
registers the Rx and Tx callbacks for all the port and queues.
After the callbacks registration, registered callbacks will get the
Rx and Tx packets. Packets then will be copied to the new mbufs that
are allocated from the user passed mempool. These new mbufs then will
be enqueued to the application passed ring. Applications need to dequeue
the mbufs from the rings and direct them to the devices like
pcap vdev for viewing the packets outside of the dpdk
using the packet capture tools.
For disabling requests, library creates the client request containing
the port and queue information and sends the request to the server.
After receiving the request, server removes the Rx and Tx callback
for all the port and queues.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The commit 66819e6 has introduced a dependency on libarchive to be able
to use some tar resources in the unit tests.
It is now an optional dependency because some systems do not have it
installed.
If CONFIG_RTE_APP_TEST_RESOURCE_TAR is disabled, the PCI test will not
be run. When a "configure" script will be integrated, the libarchive
availability could be checked to automatically enable the option.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
The qede driver depends on libz but the LDLIBS entry in makefile
was missing. Also because of the external dependency, make it
disabled in default config as per common DPDK policy on external deps.
Fixes: ec94dbc573 ("qede: add base driver")
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch introduces dpaa2 machine target to address difference
in cpu parameter, number of core to 8 and no numa support
w.r.t default armv8-a machine
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
IGB_UIO not supported for arm64 arch in kernel so disable.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The qede PMD driver is failing when building for ARMv7:
drivers/net/qede/base/ecore_dev.c:1150:6:
error: variable ‘prs_reg’ set but not used
[...]
drivers/net/qede/base/ecore_dev.c:2492:13:
error: variable ‘p_phys’ set but not used
[...]
drivers/net/qede/base/ecore_dev.c:2532:39:
error: variable ‘pbl_size’ set but not used
Fixes: 3eae93a9bf ("qede: enable PMD build")
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
The default was to compile every logs (including debug) and set
the default level to debug.
As some debug logs may hurt performance, a notice is added and the
default level is now info.
In order to enable debug logs, they must be compiled with
RTE_LOG_LEVEL=RTE_LOG_DEBUG and enabled at runtime with --log-level=8.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The driver i40e was using a specific PCI config before the release 16.04.
Since 16.04, it is always enabled in i40e (commit 56465cfaf).
The API has been deprecated in the commit 68f7759382.
The igb_uio implementation has been deprecated in commit b7cf8e155.
The config helper - through igb_uio sysfs entries - is now removed.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The cryptodev API was introduced in the DPDK 2.2 release.
Since then it has
- been reviewed and iterated for the DPDK 16.04 release
- had extensive use by the l2fwd-crypto app,
the ipsec-secgw example app,
the test app.
We believe it is now stable and the EXPERIMENTAL label should be removed.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch fixes the max logic number and memory channel number settings
on IBM POWER8 platform.
1. The max number of logic cores of a POWER8 processor is 96. Normally,
there are two sockets on a server. So the max number of logic cores
are 192. So this parch set CONFIG_RTE_MAX_LCORE to 256.
2. The socket number on POWER8 little endian platform can be larger than 16.
This patch set CONFIG_RTE_MAX_NUMA_NODES to 32 for POWER8.
3. Currently, the max number of memory channels are hardcoded to 4. However,
on a POWER8 machine, the max number of memory channels are 8. This patch
removes the constraint.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Previously, vector driver is not the first (default) choice for i40e,
as it cannot fill packet type info for l3fwd to work well. Now there
is an option for l3fwd to analysis packet type softly. So enable it
by default.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The patch introduces a new PMD. This PMD is implemented as thin wrapper
of librte_vhost. It means librte_vhost is also needed to compile the PMD.
The vhost messages will be handled only when a port is started. So start
a port first, then invoke QEMU.
The PMD has 2 parameters.
- iface: The parameter is used to specify a path to connect to a
virtio-net device.
- queues: The parameter is used to specify the number of the queues
virtio-net device has.
(Default: 1)
Here is an example.
$ ./testpmd -c f -n 4 --vdev 'eth_vhost0,iface=/tmp/sock0,queues=1' -- -i
To connect above testpmd, here is qemu command example.
$ qemu-system-x86_64 \
<snip>
-chardev socket,id=chr0,path=/tmp/sock0 \
-netdev vhost-user,id=net0,chardev=chr0,vhostforce,queues=1 \
-device virtio-net-pci,netdev=net0,mq=on
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Update for queue state event name:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is a PMD for the Amazon ethernet ENA (Elastic Network Adapters)
family.
The driver operates variety of ENA adapters through feature negotiation
with the adapter and upgradable commands set.
ENA driver handles PCI Physical and Virtual ENA functions.
Signed-off-by: Evgeny Schemeilin <evgenys@amazon.com>
Signed-off-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jakub Palider <jpa@semihalf.com>
Release Note addition:
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The new flag CONFIG_RTE_ARCH_ARM_NEON_MEMCPY is used to enable memcpy
optimizations in EAL.
As it is not always the performance benefit, the feature is disabled.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
ARMv7 machines have usually the NEON available.
Customization of the -mfpu=neon must be done by hand or by defining
another machine rte.vars.mk.
So, the CONFIG_RTE_ARCH_ARM_NEON is useless (and confusing).
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Mmap PCI resource file and add inline functions for reading from and
writing to PCI resource address space.
Add description of IBUF and OBUF address space.
Add configuration option for setting which firmware type will be used.
Right address space values for IBUFs and OBUFs offsets are used
according to configuration option CONFIG_RTE_LIBRTE_PMD_SZEDATA2_AS.
Setting link up/down and getting info about link status is done through
mmapped PCI resource address space.
Signed-off-by: Matej Vido <vido@cesnet.cz>
The CROSS variable has empty default value (for native) and
must be set when using a cross-toolchain.
Signed-off-by: Liming Sun <lsun@ezchip.com>
Acked-by: Zhigang Lu <zlu@ezchip.com>
Originally, source ports in librte_port is an input port used as packet
generator. Similar to Linux kernel /dev/zero character device, it
generates null packets. This patch adds optional PCAP file support to
source port: instead of sending NULL packets, the source port generates
packets copied from a PCAP file. To increase the performance, the packets
in the file are loaded to memory initially, and copied to mbufs in circular
manner. Users can enable or disable this feature by setting
CONFIG_RTE_PORT_PCAP compiler option "y" or "n".
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Enabled CONFIG_RTE_LIBRTE_LPM, CONFIG_RTE_LIBRTE_TABLE,
CONFIG_RTE_LIBRTE_PIPELINE libraries for arm and arm64
TABLE, PIPELINE libraries were disabled due to LPM library dependency.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Parse the device parameters from rte_eal_vdev_init,
instead of the config file, so user can change the parameters
at runtime.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch provides the implementation of a NULL crypto PMD, which supports
NULL cipher and NULL authentication operations, which can be chained together
as follows:
- Authentication Only
- Cipher Only
- Authentication then Cipher
- Cipher then Authentication
As this is a NULL operation device the crypto operations which are submitted for
processing are not actually modified and are stored in a queue pairs processed
packets ring ready for collection when rte_cryptodev_burst_dequeue() is called.
The patch also contains the related unit tests function to test the PMDs
supported operations.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch provides the implementation of an AES-NI accelerated crypto PMD
which is dependent on Intel's multi-buffer library, see the white paper
"Fast Multi-buffer IPsec Implementations on Intel® Architecture Processors"
This PMD supports AES_GCM authenticated encryption and authenticated
decryption using 128-bit AES keys
The patch also contains the related unit tests functions
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
Added new SW PMD which makes use of the libsso SW library,
which provides wireless algorithms SNOW 3G UEA2 and UIA2
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_SNOW3G_UEA2
- RTE_CRYPTO_SYM_AUTH_SNOW3G_UIA2
The SNOW 3G hash and cipher algorithms, which are enabled
by this crypto PMD are implemented by Intel's libsso software
library. For library download and build instructions,
see the documentation included (doc/guides/cryptodevs/snow3g.rst)
The patch also contains the related unit tests function to test the PMD
supported operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
As cryptodev library does not depend on mbuf_offload library
any longer, this patch removes it.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Remove pci configuration of 'extended tag' and 'max read request
size', as they are not required by all devices and it lets PMD to
configure them if necessary.
In addition, 'pci_config_space_set()' is deprecated.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
CONFIG_RTE_LIBRTE_EAL_*APP can be replaced by CONFIG_RTE_EXEC_ENV_*APP.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
