Eliminate separate codepath/handling for single queue
as the multiqueue code path takes care of it as well.
The only difference being the end_grp_id being 1
now instead of 0 for single queue, but that does not matter
for single queue and does not alter any functionality.
Fixes: 6133f20797 ("net/bnxt: add Rx queue create/destroy")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Remove "__rte_unused" instances that are wrongly marked.
Fixes: 6dc83230b4 ("net/bnxt: support port representor data path")
Fixes: 1bf01f5135 ("net/bnxt: prevent device access when device is in reset")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When statically linked the function prandom_bytes is exposed
and might conflict with something in application. All driver
functions should use the same prefix.
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Clean up unused function parameters.
2. Declare no external referenced function as static and remove
their prototype from the header file.
Fixes: ec77c62983 ("net/bnxt: add stats context allocation")
Fixes: 200b64ba0b ("net/bnxt: free statistics context")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
An application using rte_flow may define a large number of queues
but only use a small subset of them at any one time.
Since querying the status of each queue requires a request/spin/reply
with the firmware, optimize by skipping the request for queues not
running.
For those queues the statistics will be 0.
This cuts the cost of single xstats query in half and has even
bigger gain for simple stats query.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fixes a few different things:
* Remove 'fw_version' NULL checks, it is allowed if the 'fw_size' is
zero, 'fw_version' being NULL but 'fw_size' not zero condition checked
in ethdev layer
* Be sure required buffer size is returned if provided one is not big
enough, instead of returning success (0)
* Document in doxygen comment the '-EINVAL' is a valid return type
* Take into account that 'snprintf' can return negative value
* Cast length to 'size_t' to compare it with 'fw_size'
Fixes: bb42aa9ffe ("net/atlantic: configure device start/stop")
Fixes: ff70acdf42 ("net/axgbe: support reading FW version")
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Fixes: 748eccb97c ("net/dpaa2: add support for firmware version get")
Fixes: b883c0644a ("net/e1000: add firmware version get")
Fixes: 293430677e ("net/enic: add handler to return firmware version")
Fixes: 1f5ca0b460 ("net/hns3: support some device operations")
Fixes: bd5b86732b ("net/hns3: modify format for firmware version")
Fixes: ed0dfdd0e9 ("net/i40e: add firmware version get")
Fixes: e31cb9a362 ("net/ice: support FW version getting")
Fixes: 4f09bc55ac ("net/igc: implement device base operations")
Fixes: eec10fb0ce ("net/ionic: support FW version")
Fixes: 8b0b565742 ("net/ixgbe: add firmware version get")
Fixes: 4d9f5b8adc ("net/octeontx2: add FW version get operation")
Fixes: f97b56f9f1 ("net/qede: support FW version query")
Fixes: 83fef46a22 ("net/sfc: add callback to retrieve FW version")
Fixes: bc84ac0fad ("net/txgbe: support getting FW version")
Fixes: 2191347120 ("ethdev: add firmware version get")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Driver cancels the health check alarm only if error recovery is enabled
in the FW. This can cause an issue. There is a small window where the
driver receives the async event from FW and port close is invoked
immediately. Driver clears BNXT_FLAG_RECOVERY_ENABLED flag when it gets
the async event from FW. As a result, the health check alarm will not
get canceled during port close and causes a segfault when the alarm tries
to read Heartbeat register.
Fix this by canceling the health check alarm unconditionally during
port stop.
Fixes: 9d0cbaecc9 ("net/bnxt: support periodic FW health monitoring")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
For Thor devices, RSS table can only accommodate 512 Rx queues.
When RSS is enabled, Cap the max Rx rings to 512.
For non-RSS case, the number will be limited by number of VNICs.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Fix resource cleanup in port close.
Once the pointers are freed, set them to NULL.
Make sure access to the pointers is validated before use.
Fixes: bb81e07323 ("net/bnxt: support LED on/off")
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Fixes: 1d0704f4d7 ("net/bnxt: add device configure operation")
Fixes: 698aa7e953 ("net/bnxt: add code to determine the Tx COS queue")
Fixes: 322bd6e702 ("net/bnxt: add port representor infrastructure")
Fixes: 0bf5a0b5eb ("net/bnxt: add a failure log")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The "Unregistered with fw" message was being logged in a wrong function.
Moved it to the right place.
Fixes: a7dda7e0a0 ("net/bnxt: log port id in async events")
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While configuring LRO, driver should check the return value
of bnxt_hwrm_vnic_tpa_cfg() HWRM command and return error
when the FW command fails.
Fixes: 0958d8b643 ("net/bnxt: support LRO")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During port start when bnxt_start_nic() fails, it tries to free
"intr_handle->intr_vec" but the variable is not set to NULL after that.
If port start fails, driver invokes bnxt_dev_stop() which will lead
to a double free of "intr_handle->intr_vec".
Fix it by removing the call to free "intr_handle->intr_vec" in the
bnxt_start_nic() failure path as it is anyway doing in bnxt_dev_stop().
Fixes: 9d276b439a ("net/bnxt: fix error handling in device start")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The flag ETH_LINK_SPEED_AUTONEG is 0,
so it cannot be used in a capability bitmap.
Having 0 in speed capability means all speeds are accepted.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Driver re-allocates memory for the command response buffer
when the installed firmware version is newer (and has a larger
max response length) than the version of HWRM that was used to
build the PMD.
This change helps to avoid the re-allocation by allocating the
memory for the command response buffer with PAGE_SIZE.
Coverity issue: 366256, 366204, 366180
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
When the mask field of an rte_flow pattern item is NULL,
the default mask for that item type should be used.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Remove early buffer posting logic from burst receive loop to address
several issues:
- Posting receive descriptors without first posting completion
entries risks overflowing the completion queue.
- Posting receive descriptors without updating rx_raw_prod
creates the possibility that the receive descriptor doorbell
can be written twice with the same value.
- Having this logic in the inner descriptor processing loop
can impact performance.
Fixes: 637e34befd ("net/bnxt: optimize Rx processing")
Fixes: 04067844a3 ("net/bnxt: reduce CQ queue size without aggregation ring")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fixed to return error when PTP support is not supported on the port.
Also, removed an unnecessary check inside bnxt_get_rx_ts().
Fixes: b11cceb83a ("net/bnxt: support timesync")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
VFs does not have the privilege to change link configuration.
But the driver silently returns success to these ethdev callbacks
without actually issuing the HWRM command to bring the link up/down.
Fixes: 5c206086fe ("net/bnxt: add link state operations")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The PMD is allocating an extra RSS context with each port start.
But it is freeing only one RSS context during port stop. So at some point
we run out of RSS contexts when we do multiple port stop/start sequences.
bnxt_hwrm_vnic_ctx_alloc() is called by bnxt_setup_one_vnic(), but
bnxt_hwrm_vnic_ctx_free() is not called in the corresponding
bnxt_free_one_vnic().
Fix this by calling bnxt_hwrm_vnic_ctx_free() in bnxt_free_one_vnic().
Fixes: 7fe5668d2e ("net/bnxt: support VLAN filter and strip")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
CID 363716 (#1 of 1): Unchecked return value (CHECKED_RETURN)
check_return: Calling rte_pci_write_config without checking
return value (as is done elsewhere 46 out of 49 times).
Coverity issue: 363716
Fixes: be14720def ("net/bnxt: support FW reset")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fix to read the sequence ID register to get Tx timestamp.
Reading the sequence ID register is necessary for the HW FIFO to
advance and thereby get the correct value of the timestamp on Tx side.
This patch fixes that.
Fixes: b11cceb83a ("net/bnxt: support timesync")
Cc: stable@dpdk.org
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
To support more representor type, this patch introduces representor type
enum. The enum is subject to be extended to support new representor in
patches upcoming.
For each devarg structure, only one type supported.
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
timesync adjust and write_time APIs needed to account for the Rx and Tx
timestamp counters as well. Fix it since it was not done earlier.
Fixes: b11cceb83a ("net/bnxt: support timesync")
Cc: stable@dpdk.org
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fix to return count in xstats get op in all cases.
Driver was returning 0 if the 'xstats' parameter being passed to
xstats_get_op was NULL. This won't work on some applications that
rely on a valid count being passed even in this case so that it can
allocate memory accordingly followed by a reissue of the xstats_get_op
to get the actual stats populated by the driver.
Fixes: 063e59ddd2 ("net/bnxt: fix crash in xstats get")
Cc: stable@dpdk.org
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Address build issues with Clang and without glibc on ppc64le.
Vector can be a keyword and should not be used in code.
Renaming it to avoid conflict.
Reported-by: Piotr Kubaj <pkubaj@freebsd.org>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In the init path, driver ignores few of the HWRM command failures.
There is no need to log the error message in those cases.
Fixes: 3fb93bc7c3 ("net/bnxt: initialize parent PF information")
Fixes: 4e3f887bec ("net/bnxt: support HWRM port PHY qcaps")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix to return an error when the HWRM version that the driver
is compiled against is incompatible with the FW that is actually
running on the card. This is determined based on the req length
indicated by FW against the value supported in the HWRM.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
1. Renamed bnxt_hwrm_alloc_vf_info()/bnxt_hwrm_free_vf_info to
bnxt_alloc_vf_info()/bnxt_free_vf_info as it does not
issue any HWRM command to fw.
2. Fix missing unlock when memory allocation fails.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix HWRM_VER_GET command to handle DEV_NOT_RDY state.
Driver should fail probe if the device is not ready.
Conversely, the HWRM_VER_GET poll after reset can safely
retry until the existing timeout is exceeded.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When host SW issues a HWRM_RING_FREE for Tx/Rx/AGG ring in HW,
the FW flushes the BDs associated with the ring and performs other
cleanup in the HW. The host software should ideally check for an
indication from the FW indicating this step has been completed
successfully to avoid unexpected errors during cleanup.
The FW issues a HWRM_DONE response to the RING_FREE request on
the corresponding CQ ring. Poll the CQs during cleanup and
ensure the HWRM_FREE command is completed not just based on the
value of valid bit but also the HWRM_DONE response for the ring.
If the HWRM_DONE response is not seen, force the cleanup to
complete just based on the valid bit.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Remove code for setting consumed mbuf pointers to NULL from the
vector receive functions as a minor performance optimization.
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fix a number of issues in the bnxt receive descriptor status
function, including:
- Provide status of receive descriptor instead of completion
descriptor.
- Remove invalid comparison of raw ring index with masked ring
index.
- Correct misinterpretation of offset parameter as ring index.
- Correct misuse of completion ring index for mbuf ring (the
two rings have different sizes).
Fixes: 0fe613bb87 ("net/bnxt: support Rx descriptor status")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
On Thor, Rx timestamp is present in the Rx completion record.
Only 32 bits of the timestamp is present in the completion.
The driver needs to periodically poll the current 48 bit
free running timer using the HWRM_PORT_TS_QUERY command.
It can combine the upper 16 bits from the HWRM response
with the lower 32 bits in the Rx completion to produce
the 48 bit timestamp for the Rx packet.
This patch adds an alarm thread to periodically poll the current 48 bit
free running timer using the HWRM_PORT_TS_QUERY command.
This avoids issuing the hwrm command from the Rx handler.
This patch also handles the timer roll over condition.
Fixes: 6cbd89f9f3 ("net/bnxt: support PTP for Thor")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Moved fw readiness check to a new routine bnxt_check_fw_ready().
During error recovery, driver needs to wait for fw readiness.
For that, it uses bnxt_hwrm_ver_get() function now and that
function does parsing of the VER_GET response as well.
Added a new lightweight function bnxt_hwrm_poll_ver_get() for polling
the firmware readiness which issues VER_GET and checks for success
without processing the command response.
Fixes: df6cd7c1f7 ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During some fatal firmware error conditions, the PCI config space
register 0x2e which normally contains the subsystem ID will become
0xffff. This register will revert back to the normal value after
the chip has completed core reset. If we detect this condition,
we can poll this config register immediately for the value to revert.
Because we use config read cycles to poll this register, there is no
possibility of Master Abort if we happen to read it during core reset.
This speeds up recovery significantly as we don't have to wait for the
conservative min_time before polling to see if the firmware has come
out of reset. As soon as this register changes value we can proceed
to re-initialize the device.
Fixes: df6cd7c1f7 ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This is a new async message that the firmware can send to check if it
can communicate with the driver. This is an added error detection
scheme that firmware can use if it suspects errors in the PCIe
interface. When the driver receives this async message, it will reply
back echoing some data in the async message. If the firmware is not
getting the reply with the proper data after some retries, error
recovery will kick in.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Used port id in async event logs.
2. Added a debug log in bnxt_hwrm_func_driver_unregister().
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update HWRM headers to version 1.10.2.15
which updates the backing store API for additional TQM rings.
Add support for 9th TQM ring using latest firmware interface.
Also make sure that we set only necessary bits in the enables
field in backing store request.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Brought in the latest hsi_struct_def_dpdk.h.
HWRM API is now updated to version 1.10.2.15.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Update queues per VNIC in single queue mode.
bp->rx_num_qs_per_vnic is not initialized in the single queue mode.
As a result of this when an interface is reconfigured to single
queue mode from an existing multiqueue mode, bp->rx_num_qs_per_vnic
is not updated to the value of 1. Hence, the driver will try to
access more than one queue resulting in a crash.
This patch fixes it by initializing bp->rx_num_qs_per_vnic in the
single queue mode as well.
Fixes: 36024b2e7f ("net/bnxt: allow dynamic creation of VNIC")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Removed an unnecessary extra blank line.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
PMD should not set any flags to receive RoCE traffic while
configuring the vnic. Since the PMD does not support RoCE
some of the flags and code is unused. Clean it up.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
bnxt_alloc_hwrm_rings() was duplicating a snippet of code that was
already present in bnxt_alloc_hwrm_rx_ring() with just one line/function
invocation missing. Add that line and replace the snippet of code
with a call to bnxt_hwrm_alloc_rx_ring
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
