Instead of FDIR filters RTE flow API should be used.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch fixes the failure of recreate flexible fdir rule.
The root cause is that the flex_mask_flag is not reset during
flow destroy and flow flush.
Fixes: 6ced3dd72f5f ("net/i40e: support flexible payload parsing for FDIR")
Cc: stable@dpdk.org
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes the fdir cannot receive rx writeback packet issue.
The root cause is FDIR interrupt is not correctly enabled.
Beside this, to make sure fdir programming works fine when the port
is stopped, move the fdir interrupt configure from start/stop to
setup/teardown.
Fixes: cfd662d22e7b ("net/i40e: fix interrupt throttling setting in PF")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch optimized the fdir update rate for i40e PF, by tracking
whether the fdir rule being inserted into the guaranteed space
or shared space.
For the flows that are inserted to the guaranteed space, we assume
that the insertion will always succeed as the hardware only report
the "no enough space left" error. In this case, the software can
directly return success and no need to retrieve the result from
the hardware. When destroying a flow, we also assume the operation
will succeed as the software has checked the flow is indeed in
the hardware.
See the fdir programming status descriptor format in the datasheet
for more details.
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
This patch allocated some memory pool for flow management to avoid
calling rte_zmalloc/rte_free every time.
This patch also improves the hash table operation. When adding/removing
a flow, the software will directly add/delete it from the hash table.
If any error occurs, it then roll back the operation it just done.
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
This patch introduces a FDIR flow management for guaranteed/shared
space tracking.
The fdir space is reported by the
i40e_hw_capabilities.fd_filters_guaranteed and fd_filters_best_effort.
The fdir space is managed by hardware and now is tracking in software.
The management algorithm is controlled by the GLQF_CTL.INVALPRIO.
Detailed implementation please check in the datasheet and the
description of struct i40e_fdir_info.fdir_invalprio.
This patch changes the global register GLQF_CTL. Therefore, when devarg
``support-multi-driver`` is set, the patch will not take effect to
avoid affecting the normal behavior of other i40e drivers, e.g., Linux
kernel driver.
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
The legacy filter API will be superseded by rte_flow.
There are also several small features which can not be
implemented in rte_flow. This patch re-implemented these
features as private API.
Three APIs are added:
rte_pmd_i40e_get_fdir_info.
rte_pmd_i40e_get_fdir_stats.
rte_pmd_i40e_set_gre_key_len.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Enable source MAC address and destination MAC address as FDIR's
input set for ipv4-other, ipv4-udp and ipv4-tcp. When OVS-DPDK is
working as a pure L2 switch, enable MAC address as FDIR input set
with Mark+RSS action would help the performance speed up. And FVL
FDIR supports to change input set with MAC address.
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Merge of ESP and L2TP code in i40e_fdir.c added checks on
cus_pctype->index which caused flow creation for ESP to fail.
Added fill_ipv4_function()
Refactored code to have one path for customized and non customized
pctype's.
Fixes: c5f8365bc85d ("net/i40e: support flow director for L2TPv3 over IP")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Rory Sexton <rory.sexton@intel.com>
add fill_ip6_head()
hardcode udp destination port to 4500
handle ESP and AH pctypes in ESP-AH profile
update the i40e user guide with ESP information.
update release notes for i40e changes
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Adding FDIR support for L2TPv3 over IP header matching and adding
a new customized pctype for l2tpv3 over IP.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This commit adds a fdir_enable flag in a uint8_t sized hole
the rx queue structure The flag enables the rx code path to
easily identify if fdir is active. This can be used to skip
fdir id processing when it is not required.
The flag is zero by default (as rxq is zmalloc-ed at startup),
and the flag is set to 1 on configuration of a flow director rule.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Mesut Ali Ergin <mesut.a.ergin@intel.com>
Since we change these macros, we might as well avoid triggering complaints
from checkpatch because of mixed case.
old=RTE_IPv4
new=RTE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv4
new=RTE_ETHER_TYPE_IPV4
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
old=RTE_ETHER_TYPE_IPv6
new=RTE_ETHER_TYPE_IPV6
git grep -lw $old | xargs sed -i -e "s/\<$old\>/$new/g"
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Also rename arp_hrd, arp_pro, arp_hln, arp_pln and arp_op fields
to avoid conflict with the #defines in gnu libc.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This reverts commit 7546dc4a1331340ecb665af9af0a005bb8b657c8.
In i40e FDIR PMD code for checking programming status,
when the action of add FDIR filter is ok, i40e NIC will
not write back to programming status descriptor, so if
PMD code check DD is not done after period of time dealy,
it means the add or remove filter action is ok. It only write
back descriptor when fail. So, there is no issue for the original
code.
Fixes: 7546dc4a1331 ("net/i40e: fix check of flow director programming status")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In i40e FDIR PMD code for checking programming status
function i40e_check_fdir_programming_status(), the initial value
of return value ret should be set to -1 not 0, because if DD bit of
I40E_RX_DESC_STATUS_DD is not write back, this function will return
0 to upper function, this give an error info to upper function, the
fact for this is it is time out for DD write back and it should return
-1.
Fixes: 05999aab4ca6 ("i40e: add or delete flow director")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The summarized global register change info will be logged
no matter if there's real global register change. Since
only real changes are logged now, there's no need to
summarize global register change info, otherwise will
cause misunderstanding.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Global register change info during enabling
flexible payload is not printed.
This patch changes macro to print the global
register change info.
Fixes: d2f9fe8ae309 ("net/i40e: turn off flexible payload on driver init")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch provides the option to disable writing some global registers
in PMD, in order to avoid affecting other drivers, when multiple drivers
run on the same NIC and control different physical ports. Because there
are few global resources shared among different physical ports.
Fixes: ec246eeb5da1 ("i40e: use default filter input set on init")
Fixes: 98f055707685 ("i40e: configure input fields for RSS or flow director")
Fixes: f05ec7d77e41 ("i40e: initialize flow director flexible payload setting")
Fixes: e536c2e32883 ("net/i40e: fix parsing QinQ packets type")
Fixes: 19b16e2f6442 ("ethdev: add vlan type when setting ether type")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
There are several func calls to rte_zmalloc() which don't have null
pointer check on the return value. And before return, the memory
is not freed. It fixes by adding null pointer check and rte_free().
Fixes: 078259773da9 ("net/i40e: store ethertype filter")
Fixes: 425c3325f0b0 ("net/i40e: store tunnel filter")
Fixes: c50474f31efe ("net/i40e: support tunnel filter to VF")
Fixes: 5c53c82c8174 ("net/i40e: store flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Increase the internal limit for flow types from 32 to 64
to support future flow type extensions.
Change type of variables from uint32_t[] to uint64_t[]:
rte_eth_fdir_info.flow_types_mask
rte_eth_hash_global_conf.sym_hash_enable_mask
rte_eth_hash_global_conf.valid_bit_mask
This modification affects the following components:
net/i40e
net/ixgbe
app/testpmd
ABI versioning used to keep ABI stability.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Function i40e_GLQF_reg_init() overwrites global register for
flexible payload, forcing extraction of first 16 bytes of
L2/L3/L4 payload to the field vector even if flexible payload
is not used by an application. Such unconditional turn on of
flexible payload effectively disables ability to use outer
IP Destination address for RSS/FDIR for tunnelled packets,
as flexible payload overwrites outer IP destination address
on the field vector.
Now flexible payload turned on only when flow director is
enabled and configured.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The struct rte_memzone field .phys_addr is renamed to .iova.
The deprecated name is kept in an anonymous union to avoid breaking
the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
For complex packets use raw flow type with pre-constructed packet buffer
instead of creating a packet internally in PMD.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Previously, to get MFN address in dom0, this API is a wrapper to
obtain the "physical address".
As we will removed xen dom0 support, this API is not necessary.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds FDIR support for GTP-C and GTP-U. The
input set of GTP-C and GTP-U is TEID.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
rte_eth_fdir_* structures are still used in FDIR functions.
This patch adds i40e private FDIR related structures and
functions to finish integration FDIR with generic flow API.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Implement dynamic mapping of software flow types to hardware pctypes.
This allows to add new flow types and pctypes for DDP without changing
API of the driver. The mapping table is located in private
data area for particular network adapter and can be individually
modified with set of appropriate functions.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After adding a fdir rule for IPv6 with input set TC, IPv6 packets
with the specific TC can't be assigned the right queue.
The root cause is that TC is parsed wrongly, this patch fixes
TC parsing problem.
Fixes: 7d83c152a207 ("net/i40e: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
rte_driver->name has the driver name and all physical and virtual
devices has access to it.
Previously it was not possible for virtual ethernet devices to access
rte_driver->name field (because eth_dev used to keep only pci_dev),
and it was required to save driver name in the device private struct.
After re-works on bus and vdev, it is possible for all bus types to
access rte_driver.
It is able to remove the driver name from ethdev device private data and
use eth_dev->device->driver->name.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
This patch adds flexible payload parsing support for
flow director filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously, the FDIR programming time is +11ms on i40e.
This patch will result in an average programming time of
22usec with a max of 60usec .
Signed-off-by: Michael Lilja <ml@napatech.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds i40e_flow_flush function to flush all
filters for users. And flow director flush function
is involved first.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
