The necessary vDPA ops have already been implemented
in ifcvf driver. So just need to announce the necessary
protocol features to enable the host notifier support.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When the first ETH_LINK_UP slave is added to a bonding device, it is
immediately activated. If these are polling slaves, there will be a
later link state event, when last_link_status doesn't match link_status.
But because this slave is already activated, the bonding device's link
status isn't updated.
To fix this, we always attempt to update the bonding device's link status
in the link state change callback.
Fixes: 46fb43683679 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Since the kni library is an optional library, we need to add a check
here to ensure that the kni wrapper PMD is only built when the main kni
lib is being built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Make the compiler switch name and document name consistent as ``ifc`` to
avoid confusion. Also rename the map file to standard name for meson
build in the process.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
TX descriptor eop_offset field is not initialized and it could
contain garbage. This patch fixes the potential problem setting
EOP as the only subfield. The other subfield, data offset, is
not used by now.
Fixes: b812daadad0d ("nfp: add Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Add API to flush all the filters under specified port.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to query filter hit and byte counts from hardware.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to construct delete filter work request to remove filter
at specified index in LE-TCAM (maskfull) region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Define filter work request API used to construct filter operations
to be communicated with firmware. These requests are sent via
control queue and completions come asynchronously in firmware event
queue.
Implement flow create operation to create filters in LE-TCAM
(maskfull) region at specified index.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add control queue to communicate filter creation/deletion requests
with firmware. This API will be used by subsequent patches.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Introduce rte_flow skeleton and implement validate operation.
Parse and convert <item>, <action>, <attributes> into hardware
specification. Perform validation, including basic sanity tests
and underlying device's supported filter capability checks.
Currently add support for:
<item>: IPv4, IPv6, TCP, and UDP.
<action>: Drop, Queue, and Count.
Also add sanity checks to ensure filters are created at specified
index in LE-TCAM region. The index in LE-TCAM region indicates
the filter rule's priority with index 0 having the highest priority.
If no index is specified, filters are created at closest available
free index.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch available filter resources from firmware and allocate table for
book-keeping and managing filters in hardware. Also define the hardware
filter specification (ch_filter_specification) used to describe each
filter rule.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Apart from not being used, this is causing problem when compiling
DPDK with the musl library as reported by bugzilla.
Bugzilla ID: 40
Fixes: c7e9729da6b5 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Link speed should is not limited to 10Gb/s and it shouldn't be hardcoded.
They link speed is set to none instead and the applications shouldn't
rely on this value when using ENA PMD.
Fixes: 1173fca25af9 ("ena: add polling-mode driver")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
The pointer received from rte_memzone_reserve from macro
ENA_MEM_ALLOC_COHERENT_NODE was not stored anywhere, and as a result
memory allocated by this macro could not been released.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
When use GENMASK_ULL(63,0) left shift by 64 bits is performed.
Shifting by number greater or equal then word length
is undefined operation and failed on some platforms.
Fixes: 9ba7981ec992 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
ENA_MEM_ALLOC_NODE not need to use contiguous physical memory.
Also using memset without checking if allocation succeed can cause
segmentation fault.
To avoid both issue use rte_zmalloc_socket.
Fixes: 3d3edc265fc8 ("net/ena: make coherent memory allocation NUMA-aware")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Need to check if memory allocation succeed before using it.
Using memset on NULL pointer cause segfault.
Fixes: 9ba7981ec992 ("ena: add communication layer for DPDK")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
During initializing Tx queues update Non-Uniform Memory Access
configuration in NIC firmware.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Adjust error checking and cleaning to Linux driver:
* add checking if MTU is to small,
* fix error messages (mismatched Rx and Tx),
* return error received from base driver or proper error
code instead of -1,
* in case of error release occupied resources,
* in case of Rx error trigger NIC reset.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Validate Tx req id during clearing completed packets.
If id is wrong, trigger NIC reset.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Move configuration of IO queue numbers to separate function and take
into consideration max number of IO completion queues.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Enable AENQ FATAL_ERROR and WARNING callbacks by setting flags
in aenq_groups. They are handled by "unimplemented handler".
If unimplemented handler is called, error is logged.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
In function ena_infos_get driver provides information about minimal
and maximal number of Rx and Tx descriptors.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Function ena_check_and_linearize_mbuf check Tx mbuf for number of
segments and linearize (defragment) it if necessary. It is called
before sending each packet.
Information about maximum number of segments is stored per each ring.
Maximum number of segments supported by NIC is taken from ENA COM in
ena_calc_queue_size function and stored in adapter structure.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
Add variable wd_state to make driver functional without keep alive
AENQ handler.
The watchdog will be executed only if the aenq group has keep alive
enabled.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
The admin queue can stop responding or became inactive due to unexpected
behaviour of the device. In that case, the whole device should be
restarted.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Keep alive is executing AENQ interrupt periodically. It allows to check
health of the device and trigger reset event if the device will stop
responding.
To check for the state of the device, the DPDK application must call
rte_timer_manage().
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reset routine can be used by the DPDK application to reset the device in
case of receiving RTE_ETH_EVENT_INTR_RESET from the PMD.
The reset event is not triggered by the driver, yet. It will be added in
next commits to enable error recovery in case of misfunctioning of the
device.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
There is no need to check for restart all queues. It is sufficient to
check only previously initialized queues.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
When ENA notifications are provided ena_notification handler is called.
It checks if received value is not corrupted and if necessary it
reports proper warnings.
Data received from NIC is parsed in ena_update_hints. Fields for
storing those information was added to ena_adapter structure.
ENA notification are enabled by setting ENA_ADMIN_NOTIFICATION flag in
aenq_groups.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
To make the LSC interrupt working, the AENQ must be configured properly
in the ENA device. The AENQ interrupt is common for all maintenance
interrupts - the proper handler is then executed depending on the
received descriptor.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Lack of uninit routine could lead to memory leak.
Stop was added to fulfill allowed PMD operations.
Checks for the PMD states in the start and configure routine were
removed, as the upper layer is already checking for them.
The interrupt setup was moved from start to init function.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The ENA device is able to send MSI-X when it will complete an command
when polling mode is deactivated. Further, the same interrupt handler
will be used for the AENQ handling - services of the ENA device, that
allows to implement watchdog or LSC handler.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
The legacy LLQ should no longer be supported by the drivers, as this API
is deprecated. Because of that, it was removed from the driver.
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
