So that we will not break ABI in future extension by adding few more
fields.
Struct vhost_virtqueue is reserved with 16 qwords (the later vhost-live
migration support would at least consume 3 of them), and struct virtio_net
is reserved with a bit more, 64 qwords, as there is only one instance for
a virtio nic instance.
Note that both reservation are not placed at the end of the struct, but
instead before the last field, since both the last field at the two struct
take a lot spaces. Putting the reservation after it would divide those
reserved fields to another cacheline. (we might need fix them in future, btw)
Suggested-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
RHEL 7.2 contains additional backports from newer upstream kernels.
Add RHEL_RELEASE_CODE logic for RHEL_RELEASE_VERSION(7,2) to pick up
the changes to kernel functions.
Signed-off-by: Lee Roberts <lee.roberts@hpe.com>
Implement vqtbl1q_u8 intrinsic function, which is not supported in armv7-a.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
CONFIG_* from config files can not be used in code.
Fixes: 12f45fa7e29b ("eal/arm: read timer from PMU if enabled")
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
This is one of those trivial things git and other tools complain
about.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The CHANNEL_CMDS_MAX_VM_CHANNELS is duplicated in the channel_commands
header file. This commit removes that duplication.
Fixes: 210c383e247b ("power: packet format for vm power management")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The rx_mbuf_alloc_failed counter was only cleared by virtio driver.
Now it is cleared by common rte_eth_stats_reset function for all
drivers at once.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Fixes the mbuf allocation not initialized problem. This problem will cause
the mbufs not be able to freed back to mempool by rte_pktmbuf_free().
Fixes: ef3403fb6f9a ("port: source and sink")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Give user a chance to customize the hash key compare function.
The default rte_hash_cmp_eq function is set in the rte_hash_create
function, but these builtin ones may not good enough, so the user
may call this to override the default one.
Signed-off-by: Yu Nemo Wenbin <yuwb_bjy@ctbri.com.cn>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
rte_hash_create function was accidentally duplicated in
DPDK_2.1 in rte_hash_version.map.
Fixes: 473d1beb ("hash: allow to store data in hash table")
Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
RTE_PMD_DEBUG_TRACE was changed also to support pedantic flag,
but not completely.
the macro changed only under the RTE_LIBRTE_ETHDEV_DEBUG define,
but when RTE_LIBRTE_ETHDEV_DEBUG is not defined the old format
was left.
fix the macro to support pedantic flag in any case.
Fixes: b974e4a40cb5 ("ethdev: make error checking macros public")
Signed-off-by: Yaacov Hazan <yaacovh@mellanox.com>
Irrelevant of the target, the preprocessor #ifdef SSE2 for the
grinder_pipe_exists function is inadequate since the __mm_testz_si128
function requires SSE4.1, PTEST instruction described in
https://en.wikipedia.org/wiki/SSE4#SSE4.1 (I do no have better spec
reference). I have bumped the preprocessor #ifdef to require SSE4.
The Atom N2600 does not have SSE4, http://ark.intel.com/products/58916,
and so I had trouble building rte_sched with optimized version of
grinder_pipe_exists, with following:
error: inlining failed in call to always_inline _mm_testz_si128’:
target specific option mismatch
GCC 4.9 correctly identifies my target as not having SSE4, and with
provided patch builds the non-optimized version of grinder_pipe_exists.
Signed-off-by: Mike Sowka <msowka@gmail.com>
The function rte_mempool_obj_iter used in mlx drivers
was not exported. So the driver loading was failing:
EAL: open shared lib librte_pmd_mlx4.so
EAL: x86_64-native-linuxapp-gcc/lib/librte_pmd_mlx4.so:
undefined symbol: rte_mempool_obj_iter
Fixes: 9d41beed24b0 ("lib: provide initial versioning")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
There is a new function in the EAL API for internal use.
It has neither a proper prefix nor a .map export:
libethdev.so: undefined reference to `is_xen_dom0_supported'
Fixes: 719dbebceb81 ("xen: allow determining DOM0 at runtime")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
gcc 4.3.4 does not include "immintrin.h", and will post below error:
lib/librte_sched/rte_sched.c:56:23: error:
immintrin.h: No such file or directory
This compiler issue is fixed with rte_vect.h
There is another issue, need SSE2 support
Fixes: 42ec27a0178a ("sched: enable SSE optimizations in config")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
- Fix for build error caused by flexible array member in
struct rte_ccryptodev_session:
error: flexible array member in otherwise empty struct
- Change void** casting of sess parameter in
rte_cryptodev_session_create which causes a strict-aliasing error.
Fixes: d11b0f30df88 ("cryptodev: introduce API and framework for crypto devices")
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
This patch is to adding hash table operations for key signature
computed on lookup ("do-sig") for LRU hash tables and Extendible buckets.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch relates to ABI change proposed for librte_table.
The key_mask parameter is added for 8-byte and 16-byte
key extendible bucket and LRU tables.The release notes
is updated and the deprecation notice is removed.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added functions for adding/deleting multiple records to table owned by
pipeline. The LIBABIVER number is incremented.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
New functions prototypes for bulk add/delete added to table API. New
functions allows adding/deleting multiple records with single function
call. For now those functions are implemented only for ACL table. For
other tables these function pointers are set to NULL.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Bug fixes for ring ports with IPv4/IPv6 reassembly support.
Previous implementation can't work properly due to incorrect choosing
process function.
Also, assuming that, when processing ip packet, ip header is know we can
set l3_len parameter here.
Fix usage RTE_MBUF_METADATA_* macros due to redefinition the macros.
Fixes: 50f54a84dfb7 ("port: add IPv6 reassembly port")
Fixes: ba92d511ddac ("port: move metadata offset reference at mbuf head")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
ring_multi_reader input port (on top of multi consumer rte_ring)
ring_multi_writer output port (on top of multi producer rte_ring)
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
select hash function for cuckoo, fbk as rte_hash_crc_4byte
if arm64-CRC extension available
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
armv8-a has optional CRC32 extension, march=armv8-a+crc enables code
generation for the ARMv8-A architecture together with
the optional CRC32 extensions.
added RTE_MACHINE_CPUFLAG_CRC32 to detect the availability of
CRC32 extension in compile time. At run-time, The RTE_CPUFLAG_CRC32
can be used to find the availability.
armv8-a+crc target support added in GCC 4.9,
Used inline assembly and emulated __ARM_FEATURE_CRC32 to work
with tool-chain < 4.9
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The following measurements shows improvement over the default
libc memcmp function
Length(B) by X% over libc memcmp
16 149.57%
32 122.7%
48 104.96%
64 98.21%
80 93.75%
96 90.55%
112 110.48%
128 137.24%
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This fix is for IPv6 checksum offload error on RHEL65.
Any optimalisation above -O0 provide error in IPv6 checksum
flag "-fstrict-aliasing" is default for optimalisation above -O0.
Step 1: testpmd -c 0x6 -n 4 -- -i --portmask=0x3 --disable-hw-vlan
--enable-rx-cksum --crc-strip --txqflags=0
Step 2: settings and start
set verbose 1
set fwd csum
start
Step 3: send scapy with bad checksum IPv6/TCP packet
Ether(src="52:00:00:00:00:00",
dst="90:e2:ba:4a:33:5d")/IPv6(src="::1")/TCP(chksum=0xf)/("X"*46)
Step 4: Received packets:
RESULTS: IPv6/TCP': ['0xd41'] or other unexpected.
EXPECTED RESULTS: IPv6/TCP': ['0x9f5e']
Fixes: 2b039d5f20a3 ("net: fix build with gcc 4.4.7 and strict aliasing")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The crypto API is in an early state.
It requires more discussions and experiments to declare it stable,
as discussed in http://dpdk.org/ml/archives/dev/2015-November/028634.html
A documentation section will be required in the guides.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This library add support for adding a chain of offload operations to a
mbuf. It contains the definition of the rte_mbuf_offload structure as
well as helper functions for attaching offloads to mbufs and a mempool
management functions.
This initial implementation supports attaching multiple offload
operations to a single mbuf, but only a single offload operation of a
specific type can be attach to that mbuf.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch contains the initial proposed APIs and device framework for
integrating crypto packet processing into DPDK.
features include:
- Crypto device configuration / management APIs
- Definitions of supported cipher algorithms and operations.
- Definitions of supported hash/authentication algorithms and
operations.
- Crypto session management APIs
- Crypto operation data structures and APIs allocation of crypto
operation structure used to specify the crypto operations to
be performed on a particular mbuf.
- Extension of mbuf to contain crypto operation data pointer and
extra flags.
- Burst enqueue / dequeue APIs for processing of crypto operations.
Signed-off-by: Des O Dea <des.j.o.dea@intel.com>
Signed-off-by: John Griffin <john.griffin@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Adding a new macro for specifying __aligned__ attribute, and updating the
current __rte_cache_aligned macro to use it.
Also adding a new macro to specify the __packed__ attribute
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The functions rte_eth_rx_queue_count and rte_eth_descriptor_done are
supported by very few PMDs. Therefore, it is best to check for support
for the functions in the ethdev library, so as to avoid run-time crashes
at run-time if the application goes to use those APIs. Similarly, the
port parameter should also be checked for validity.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The functions for rx/tx burst, for rx_queue_count and descriptor_done in
the ethdev library all had two copies of the code. One copy in
rte_ethdev.h was inlined for performance, while a second was in
rte_ethdev.c for debugging purposes only. We can eliminate the second
copy of the functions by moving the additional debug checks into the
copies of the functions in the header file. [Any compilation for
debugging at optimization level 0 will not inline the function so the
result should be same as when the function was in the .c file.]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Move the function pointer and port id checking macros to rte_ethdev and
rte_dev header files, so that they can be used in the static inline
functions there. Also replace the RTE_LOG call within
RTE_PMD_DEBUG_TRACE so this macro can be built with the -pedantic flag
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The macros to check that the function pointers and port ids are valid
for an ethdev are potentially useful to have in a common headers for
use with all PMDs. However, since they would then become externally
visible, we apply the RTE_ & RTE_ETH_ prefix to them as approtiate.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
pthread_setname_np() function added in glibc 2.12, using this function
in older glibc versions cause compile error:
error: implicit declaration of function "pthread_setname_np"
This patch adds "rte_thread_setname" macro and set it according
glibc >= 2.12 check, thread naming disabled for older glibc versions,
glibc versions that support "pthread_setname_np" will keep using this
function.
Fixes: 67b6d3039e9e ("eal: set name to threads")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Otherwise mbufs will leak when the port is destroyed. The
rte_sched_port_qbase() and rte_sched_port_qsize() functions are used
in free now, so move them up.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Increase the number of possible subports per port to allow up to 16 bits.
It is still possible that this will require excessive RAM.
Although mbuf structure is changed, it is ABI compatiable since it
just expands existing sched part of structure to overlap pre-existing hole
in the hash element of structure.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Make rte_sched conform to kernel/DPDK coding style.
Fix missing whitespace and some of the excessively long lines.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Only use RTE_SCHED_PORT_N_GRINDERS from config.
Use RTE_BUILD_BUG_ON for errors.
The remaining implementation constants can be put together.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Drop conditional code which was for debugging credit checks.
It is hard to maintain code with any additional #ifdef baggage.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
