EFSYS_OPT_RX_SCATTER should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
EFSYS_OPT_EV_PREFECT allows to enable event prefetching
when event queue is polled.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
MAC statistics are either periodically (if supported/requested)
or on-demand written to provided DMA-mapped memory.
If periodic update is not supported (e.g. for EF10 virtual
functions), it is the driver responsibility to handle it.
EFSYS_OPT_MAC_STATS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
EFSYS_OPT_PHY_LED_CONTROL should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
EFSYS_OPT_PHY_STATS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
EFSYS_OPT_PHY_FLAGS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
EFSYS_OPT_QSTATS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
EFSYS_OPT_BIST should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
EFSYS_OPT_DIAG should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
SFN8xxx is the second family based on EF10 architecture.
It has few differences from SFN7xxx adapters family.
EFSYS_OPT_MEDFORD should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
SFN7xxx is the first family based on EF10 architecture.
EFSYS_OPT_HUNTINGTON should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
EFSYS_OPT_SIENA should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
MCDI proxy authorization may be used if privileged PCI
function (physical function) would like to intercept and
authorize MCDI requests done by unprivileged (e.g. virtual)
PCI function. It may be used to control unprivileged
function Rx mode (e.g. promiscuous, all-multicast), MTU
and default MAC address change requests etc.
Current libefx support is limited to client-side which
is required to work when function requests need to be
authorized.
Server side support required to request and do the
authorization is not implemented yet.
EFSYS_OPT_MCDI_PROXY_AUTH should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Driver can provide a function to be called to log MCDI
requests and responses to help with debugging.
Solarflare netlogdecode cross-platform tool may be used
to decode these logs.
EFSYS_OPT_MCDI_LOGGING should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Implement interface to talk to NIC management CPU. Provide
helpers to fill in MCDI requests, execute it and process
received response.
MCDI request is prepared in either PCI BAR mapped memory
(SFN5xxx/SFN6xxx) or DMA-mapped memory (SFN7xxx/SFN8xxx) and,
doorbell is pressed (memory-mapped register) to execute it.
Events about MCDI completion are delivered to house-keeping
event queue, but usage of these events is optional and MCDI
buffer may be simply polled waiting for completion
indication set.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The header defines data interface between host CPU and NIC
management CPU.
The header is automatically generated from firmware sources.
MCDI is used on NIC control path (configuration,
event/transmit/receive queues setup and teardown etc), but
not used on data path.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Filtering capabilities depend on NIC family and used firmware
variant. Provided API allows to get supported filter types
(in a priority order), add/delete individual filters and
restore entire filter table after, for example, NIC management
CPU reboot.
Rx filters allow to redirect matching flow to specified Rx queue.
Tx filters allow to control generated traffic (e.g. to implement
virtual function anti-spoofing control).
EFSYS_OPT_FILTER should be enabled to use it. It is required
for SFN7xxx and SFN8xxx adapter families support.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
libefx is a platform-independent library to implement drivers
for Solarflare network adapters. It provides unified adapter
family independent interface (if possible).
Driver must provide efsys.h header which defines options
(EFSYS_OPT_*) to be used and macros/functions to allocate
memory, read/write DMA-mapped memory, read/write PCI BAR
space, locks, barriers etc.
efx.h and efx_types.h provide external interfaces intended
to be used by drivers. Other header files are internal.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable the PMD by default on supported configurations.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Casting from structs which lay out data in typed members
to structs which have flat memory buffers, will cause
problems if the alignment of the former isn't as expected.
This patch removes the casting between structs.
Fixes: ae19955e7c ("i40evf: support reporting PF reset")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
For 25G devices auto link update was disabled because it was causing
link issues when enabled.
The problem found because of interface changes in admin queue command
"set_phy_config" and "get_phy_capabilities" for 25G.
This patch fixes the issue and enables auto link update for 25G devices.
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
MAC-PHY desync may occur causing misdetection of link up event.
Disabling K1-off feature can work around the problem.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This works around a possible stalled packet issue, which may occur due to
clock recovery from the PCH being too slow, when the LAN is transitioning
from K1 at 1G link speed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For I217 revision 6, when entering Ultra Low Power (ULP) we need to enable
Low Power Link Up (LPLU) and disable Gig speed to make it work.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
LANPHYPC low duration of 10 usec was too low for some corner cases
causing interface mismatches during Ultra Low Power (ULP) exit.
This patch increases the LANPHYPC low duration to 1 msec.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are some client PHY Ultra Low Power (ULP) register bits that are
configured by the Manageability Engine (ME) FW.
The driver must ensure that these bits are cleared on exit from ULP.
Ordinarily the ME FW would do that, but there are cases in which the
FW is not present, and the driver must handle that.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When Ultra Low Power (ULP) enabled, the client PHY needs to be set up
for link configuration after cable reconnected.
Previously link configuration was only done in auto-negotiate mode.
Do link configuration also in autoneg disabled mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add definition MAX_RX_JUMBO_FRAME_SIZE for igb.
All igb parts (82575 and newer) have 9.5K max jumbo frame size.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
I354 support was missing in the e1000_get_fw_version() which resulted in
the FW version not being reported. Support added.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The driver shouldn't give up if it fails to get the hardware mailbox lock.
This can happen in a situation where the PF-VF communication channel is
heavily loaded and causes complete communications failure between the PF
and VF drivers.
Add a counter and a delay. The driver will now retry ten times,
waiting one millisecond between retries.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
With new hardware (I219), Ultra Low Power (ULP) exit takes significantly
longer time. Therefore, driver must wait longer.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some virtual pmds report a different name than the vdev driver name
registered in eal.
While it does not hurt, let's try to be consistent.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since commit b1fb53a39d ("ethdev: remove some PCI specific handling"),
rte_eth_dev_info_get() relies on dev->data->drv_name to report the driver
name to caller.
Having the pmds set driver_info->driver_name in the pmds is useless,
since ethdev overwrites it right after.
The only thing the pmd must do is:
- for pci drivers, call rte_eth_copy_pci_info() which then sets
data->drv_name
- for vdev drivers, manually set data->drv_name
At this stage, virtio-user does not properly report a driver name (fixed in
next commit).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>
We can leave the title completion queue entry untouched since its contents
are not modified.
Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Completion queue entry data uses network endian, to access them we should
use ntoh*().
Fixes: c305090bba ("net/mlx5: replace countdown with threshold for Tx completions")
Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The list of segments to free was wrongly manipulated ending by only freeing
the first segment instead of freeing all of them. The last one still
belongs to the NIC and thus should not be freed.
Fixes: a1bdb71a32 ("net/mlx5: fix crash in Rx")
Reported-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The offsets used in rte_i40evf_stats_strings for transmission
statistics were wrong, returning the total byte count rather than
the respective (unicast, multicast, broadcast, drop, & error)
packet counts.
Fixes: da61cd0849 ("i40evf: add extended stats")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
When CONFIG_RTE_VIRTIO_USER is disabled (default on FreeBSD),
the virtio driver cannot be compiled:
librte_pmd_virtio.a(virtio_ethdev.o): In function `eth_virtio_dev_init':
(.text+0x1eba): undefined reference to `virtio_user_ops'
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
