OcteonTx was disabled for causing an internal compiler error on old gcc
versions.
See commit 4f760550a093 ("mk: disable OcteonTx for buggy compilers").
The condition that was added later to apply disabling OcteonTx
only on arm64 caused the condition to never be obeyed because it
compares ["arm64"] to [arm64].
This fixes the condition by using RTE_ARCH instead of CONFIG_RTE_ARCH,
because the former has the quotes removed, while the later doesn't.
Fixes: f3af3e44a444 ("mk: disable OcteonTx for buggy compilers only on arm64")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds an option to enable link time optimization. In addition
to LTO option itself (-flto) fat-lto-objects are being used. This is
because during the build pmdinfogen scans the generated ELF objects to
find this_pmd_name* symbol in symbol table. Without fat-lto-objects gcc
produces ELF only with extra symbols for internal use during linking.
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
dpaa and dpaa2 config have evolved to be same. The same binary
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add FIB (Forwarding Information Base) library. This library
implements a dataplane structures and algorithms designed for
fast longest prefix match.
Internally it consists of two parts - RIB (control plane ops) and
implementation for the dataplane tasks.
Initial version provides two implementations for both IPv4 and IPv6:
dummy (uses RIB as a dataplane) and DIR24_8 (same as current LPM)
Due to proposed design it allows to extend FIB with new algorithms
in future (for example DXR, poptrie, etc).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Add RIB (Routing Information Base) library. This library
implements an IPv4 routing table optimized for control plane
operations. It implements a control plane struct containing routes
in a tree and provides fast add/del operations for routes.
Also it allows to perform fast subtree traversals
(i.e. retrieve existing subroutes for a given prefix).
This structure will be used as a control plane helper structure
for FIB implementation. Also it might be used standalone in other
different places such as bitmaps for example.
Internal implementation is level compressed binary trie.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Any file with ABI versioned functions needs different macros for shared and
static builds, so we need to accommodate that. Rather than building
everything twice, we just flag to the build system which libraries need
that handling, by setting use_function_versioning in the meson.build files.
To ensure we don't get silent errors at build time due to this meson flag
being missed, we add an explicit error to the function versioning header
file if a known C macro is not defined. Since "make" builds always only
build one of shared or static libraries, this define can be always set, and
so is added to the global CFLAGS. For meson, the build flag - and therefore
the C define - is set for the three libraries that need the function
versioning: "distributor", "lpm" and "timer".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Andrzej Ostruszka <amo@semihalf.com>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The driver names for rawdevs were both different in make and meson builds
and were non-standard in the make version in that some included "rawdev" in
the name while others didn't.
Therefore, for global consistency of naming, we can use "rte_rawdev" rather
than "rte_pmd" for the prefix for the libraries. While most other driver
categories use "rte_pmd" as a prefix, there is precedent for this in the
mempool drivers use "rte_mempool" as a prefix.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When building dpdk with different kernel headers by specifying
RTE_KERNELDIR igb_uio is compiled to directory with a name of the
version of kernel thats running on the system instead of the one that
dpdk is actually compiled against. Fixed by replacing hardcoded value
with value from RTE_KERNELDIR.
Fixes: 3967af352aeb ("mk: install kernel modules")
Cc: stable@dpdk.org
Signed-off-by: Herakliusz Lipiec <herakliusz.lipiec@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
I modified the API config file to incorporate a search button into the
API documentation page.
Signed-off-by: Aideen McLoughlin <aideen.mcloughlin@intel.com>
Implementation still based on Intel SDK libraries
optimized for AVX512 instructions set and 5GNR.
This can be also build for AVX2 for 4G capability or
without SDK dependency for maintenance.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Adding compile flag to allow to build the turbo_sw PMD
without dependency to have the SDK libraries installed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the make and meson based build infrastructure along with the
eventdev(SSO) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Correct the wrong -march=-mcpu=armv8.2-a+crc+crypto+lse for
octeontx2 target. Since rte_cc_has_argument drops invalid
CFLAG and -mcpu=octeontx2 picks up the correct optimization,
this typo is not noticed in performance testing.
Fixes: 01d184798731 ("config: add octeontx2 machine")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a component uses either XOPEN_SOURCE or POSIX_C_SOURCE macro
explicitly in its build recipe, it restricts visibility of a non POSIX
features subset, such as IANA protocol numbers (IPPROTO_* macros).
Non standard features are enabled by default for DPDK both for Linux
thanks to _GNU_SOURCE and for FreeBSD thanks to __BSD_VISIBLE. However
using XOPEN_SOURCE or POSIX_(C_)SOURCE in a component causes
__BSD_VISIBLE to be defined to 0 for FreeBSD, causing different feature
sets visibility for Linux and FreeBSD. It restricts from using IPPROTO
macros in public headers, such as rte_ip.h, despite the fact they are
already widely used in sources.
Add __BSD_VISIBLE macro specified unconditionally for FreeBSD targets
which enforces feature sets visibility unification between Linux and
FreeBSD.
Add single -D_GNU_SOURCE to config/meson.build as a project argument
instead of adding separate directive for each project subtree.
This patch solves the problem of build breaks for [1] on FreeBSD [2]
following the discussion [3].
[1] https://mails.dpdk.org/archives/dev/2019-May/131885.html
[2] http://mails.dpdk.org/archives/test-report/2019-May/082263.html
[3] https://mails.dpdk.org/archives/dev/2019-May/132110.html
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add the make and meson based build infrastructure along
with the mempool(NPA) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add the make and meson based build infrastructure along with
HW definition header file.
This patch adds skeleton otx2_mbox.c file to make sure
all header files are intact, subsequent patches add content
to otx2_mbox.c
This patch also updates CONFIG_RTE_MAX_VFIO_GROUPS
value to 128 as the system can have up to 128 PFs/VFs.
For octeontx2 meson build target, CONFIG_RTE_MAX_VFIO_GROUPS
defined as 128 so no additional changes required.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Shared memory packet interface (memif) PMD allows for DPDK and any other
client using memif (DPDK, VPP, libmemif) to communicate using shared
memory. The created device transmits packets in a raw format. It can be
used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only
Ethernet mode is supported in DPDK memif implementation. Memif is Linux
only.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Weak functions don't work well with static libraries and require the use of
"whole-archive" flag to ensure that the correct function is used when
linking. Since the weak functions are only used as placeholders within
this library alone, we can replace them with non-weak functions using
preprocessor ifdefs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Per armv8 crypto extension support, make build always enable it by default
as long as compiler supports the feature while meson build only enables it
for 'default' machine of generic armv8 architecture.
It is known that not all the armv8 platforms have the crypto extension. For
example, Mellanox BlueField has a variant which doesn't have it. If crypto
enabled binary runs on such a platform, rte_eal_init() fails.
'+crypto' flag currently implies only '+aes' and '+sha2' and enabling it
will generate the crypto instructions only when crypto intrinsics are used.
For the devices supporting 8.2 crypto or newer, compiler could generate
such instructions beyond intrinsics or asm code. For example, compiler can
generate 3-way exclusive OR instructions if sha3 is supported. However, it
has to be enabled by adding '+sha3' as of today.
In DPDK, armv8 cryptodev is the only one which requires the crypto support.
As it even uses external library of Marvell which is compiled out of DPDK
with crypto support and there's run-time check for required cpuflags,
crypto support can be disabled in DPDK.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The meson build never checked for the presence of rdrand and rdseed
instructions, while make build never checked for rdseed. Ensure builds
always have the appropriate checks - and therefore defines - for these
instructions. For runtime, we also add in rdseed to the list of known
bits returned from cpuid() instruction, so we can confirm its presence at
application init time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
By default on 32-bit systems, file offsets are given as 32-bit values
which prevents support for large files. While this is unlikely to be
a problem, enabling large file support globally makes "make" and
"meson" builds consistent, since meson always enables large file
support, and without this change, the size of "struct stat" fields
will be different between the two builds.
The only location where this appears to be significant is in the
dpaax common code, where a printf needs to be updated for 32-bit
builds.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
gcc 9 on Fedora 30 gives an error
"taking address of packed member may result in an
unaligned pointer value" warnings.
For clang builds this warning is already disabled,
so disable "-Waddress-of-packed-member" for gcc builds
also.
Snippet of build error:
lib/librte_eal/linux/eal/eal_memalloc.c: In function ‘alloc_seg_walk’:
lib/librte_eal/linux/eal/eal_memalloc.c:768:12: error:
taking address of packed member of ‘struct rte_mem_config’ may result
in an unaligned pointer value [-Werror=address-of-packed-member]
768 | cur_msl = &mcfg->memsegs[msl_idx];
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
On Skylake platform, with native build, KNI kernel module crashes
because of the corrupted values passed to kernel module.
The corruption occurs because the userspace kni library works
unexpectedly. Compiler [1] is using AVX512 instructions and generated
binary is wrong [2].
It turned around gcc does its job correct, but gas is generating binary
wrong. And expected binutils 2.30, 2.31 & 2.31.1 are affected. Issue has
been fixed in binutils 2.32 with:
Commit x86: don't mistakenly scale non-8-bit displacements
AVX512 was already disabled with bintuils 2.30 [3], extending it to
2.31 & 2.31.1 too.
[1] gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2)
[2] gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
[3] Bugzilla ID 97 has the details.
Bugzilla ID: 249
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Introduce rte_cc_has_argument() Makefile helper to
check a given argument is support by the compiler.
Example Usage:
include $(RTE_SDK)/mk/rte.helper.mk
MACHINE_CFLAGS += $(call rte_cc_has_argument, -mcpu=octeontx2)
This would allow adding -mcpu=octeontx2 in MACHINE_CFLAGS
if it is only supported by the compiler. The use case for such
scheme is to enable the mcpu optimization if the compiler
supports else it needs to compile the source code without
any errors.
This patch also moves inclusion of toolchain's rte.vars.mk
to before the machine's rte.vars.mk inclusion to make
correct CC available for the cross compile case.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The rte_stack library provides an API for configuration and use of a
bounded stack of pointers. Push and pop operations are MT-safe, allowing
concurrent access, and the interface supports pushing and popping multiple
pointers at a time.
The library's interface is modeled after another DPDK data structure,
rte_ring, and its lock-based implementation is derived from the stack
mempool handler. An upcoming commit will migrate the stack mempool handler
to rte_stack.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This patch adds Poll Mode Driver for asymmetric crypto
functions of Intel QuickAssist Technology hardware.
It contains plain driver with no functions implemented, specific
algorithms will be introduced in separate patches.
This patch depends on a QAT PF driver for device initialization. See
the file docs/guides/cryptodevs/qat.rst for configuration details.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Added rte_os.h files to support OS specific functionality.
Updated build system to contain OS headers in the include
path.
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since we have the version number in a separate file at the root level,
we should not need to duplicate this in rte_version.h too. Best
approach here is to move the macros for specifying the year/month/etc.
parts from the version header file to the build config file - leaving
the other utility macros for e.g. printing the version string, where they
are.
For "make", this is done by having a little bit of awk parse the version
file and pass the results through to the preprocessor for the config
generation stage.
For "meson", this is done by parsing the version and adding it to the
standard dpdk_conf object.
In both cases, we need to append a large number - in this case "99",
previously 16 in original code - to the version number when we want to do
version number comparisons. Without this, the release version e.g. 19.05.0
will compare as less than it's RC's e.g. 19.05.0-rc4. With it, the
comparison is correct as "19.05.0.99 > 19.05.0-rc4.99".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add a new file VERSION to hold the current DPDK version number.
Have meson use this file for it's project version, and have make use
it for reporting out "showversion" and "showversionum".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
