rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/flow_classify according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_eth_dev_info_get() return value was changed from void to
int, so this patch modify rte_eth_dev_info_get() usage across
examples/ipsec-secgw according to its new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
rte_eth_dev_info_get() always fills in device information memory
with zeros on entry.
Fixes: b671987985 ("ethdev: avoid getting uninitialized info for bad port")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update Scapy version requirement from 2.4.3rc1 to 2.4.3, which has been
used because 2.4.2 had a bug which made this version unable to install.
Accept future versions of Scapy too.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
One issue caught by Coverity 343408
*deref_parm: Directly dereferencing parameter val->val.
In writeback_tdes_hex_str(), tmp_val is initialised to null.
tmp_val.val is updated only if keys are found.
If keys are not found,it doesn't fails but continues
to invoke writeback_hex_str(),where val->val is accessed
without null check.
The fix is to return the error,
if keys are not found in writeback_tdes_hex_str().
Coverity issue: 343408
Fixes: 527cbf3d5e ("examples/fips_validation: support TDES parsing")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When sending an encrypted packet which size after encapsulation exceeds
MTU, ipsec-secgw application tries to fragment it. If --reassemble
option has not been set it results with a segmantation fault, because
fragmentation buckets have not been initialized.
Fix crashing by adding extra check if --ressemble option has not been
set and packet exceeds MTU after encapsulation - drop it.
Fixes: b01d1cd213 ("examples/ipsec-secgw: support fragmentation and reassembly")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
IPv6 tunnels are already supported in case of inline and
lookaside none cases. In case of protocol offload, the details
for IPv6 header need to be added in session configuration
for security session create.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
For unknown/unsupported packets, the packet would get checked for inline
offloads after the packet is freed.
Fixes: 0ccfd14bc1 ("examples/ipsec-secgw: support inline protocol")
Cc: stable@dpdk.org
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Check the return value of the rte_eth_dev_rss_hash_conf_get function.
Coverity issue: 344970
Fixes: 3a690d5a65 ("examples/ipsec-secgw: fix first packet with inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In APP_MODE_SRTCM_COLOR_AWARE mode, sample app compilation fails
due to wrong meter color type conversion.
error log-
/qos_meter/main.c:error: conversion to incomplete type
(enum rte_meter_color) input_color);
Fixes: c1656328db ("meter: replace color definitions")
Cc: stable@dpdk.org
Reported-by: Yuan Peng <yuan.peng@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The sched library checks the subport tc ov weight value regardless
of whether RTE_SCHED_SUBPORT_TC_OV flag is enabled or not.
This fix allows application to always set valid tc ov weight value.
error log
SCHED: pipe_profile_check: Incorrect value for tc ov weight
SCHED: rte_sched_port_check_params: Pipe profile check failed(-22)
Command "tmgr" failed.
Fixes: 25961ff3bc ("examples/ip_pipeline: add traffic manager object")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Example BPF programs t2.c, t3.c in folder examples/bpf are
failing to compile with latest dpdk.org master.
The reason is changes in some core DPDK header files, that causes
now inclusion of x86 specific headers.
To overcome the issue, minimize inclusion of DPDK header files
into BPF source code.
Bugzilla ID: 321
Fixes: 9dfc06c26a ("test/bpf: add samples")
Cc: stable@dpdk.org
Reported-by: Michel Machado <michel@digirati.com.br>
Suggested-by: Michel Machado <michel@digirati.com.br>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds return value checking for fseek function to fix
error handling issue found by coverity scan.
Coverity issue: 344996
Fixes: c5eebf85ba ("examples/ntb: add example for NTB")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
There should not be blank lines at end of files.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Since all PMDs doesn't implement per queue offload capabilities but
supports RX timestamping and also since rx_offload_capa includes all
rx_queue_offload_capa's. Hence moving the logic to enable HW timestamp
via DEV_RX_OFFLOAD_TIMESTAMP flag before device configuration so that
this application can work with all PMDs.
Fixes: cd1dadeb9b ("examples/rxtx_callbacks: support HW timestamp")
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Add RED configuration to more traffic classes in app configuration
files.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Observed an issue with the length and domain number of the
delay request message sent out by the client. Due to which delay
response from master was not received.
Fixes: ab129e9065 ("examples/ptpclient: add minimal PTP client")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Application uses different pool to allocate direct and indirect
mbufs which are further spliced together to consturct a fragmented
packet and same is transmitted over the port which is configured
with DEV_TX_OFFLOAD_MBUF_FAST_FREE enabled i.e. all segments
must belong to the same pool. But constructed packet violates
the conditions.
So fixing DEV_TX_OFFLOAD_MBUF_FAST_FREE flag during device
configuration.
Fixes: fdb9eff67f ("examples/ip_fragmentation: convert to new offloads API")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The eth_dev_info was used with content that was obsolete. Added update
of struct content prior to use.
Fixes: 6b7780bfeb ("examples/ip_frag: fix use of ethdev internal device array")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Update ip pipeline sample app for configuration flexiblity of
pipe traffic classes and queues.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
All higher priority traffic classes contain only one queue, thus
remove wrr function for them. The lowest priority best-effort
traffic class conitnue to have multiple queues and packet are
scheduled from its queues using wrr function.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Abraham Tovar <abrahamx.tovar@intel.com>
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Remove workaround in tun_aesgcm_defs.sh and trs_aesgcm_defs.sh
to get around the bug where the first inbound packet is dropped
for inline crypto.
Fixes: 9297844520 ("examples/ipsec-secgw: add scripts for functional test")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Inline crypto installs a flow rule in the NIC. This flow
rule must be installed before the first inbound packet is
received.
The create_session() function installs the flow rule,
create_session() has been refactored into create_inline_session()
and create_lookaside_session(). The create_inline_session() function
uses the socket_ctx data and is now called at initialisation in
sa_add_rules().
The max_session_size() function has been added to calculate memory
requirements.
The cryprodev_init() function has been refactored to drop calls to
rte_mempool_create() and to drop calculation of memory requirements.
The main() function has been refactored to call max_session_size() and
to call session_pool_init() and session_priv_pool_init() earlier.
The ports are started now before adding a flow rule in main().
The sa_init(), sp4_init(), sp6_init() and rt_init() functions are
now called after the ports have been started.
The rte_ipsec_session_prepare() function is called in fill_ipsec_session()
for inline which is called from the ipsec_sa_init() function.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch add parameter --mtu parse key and enumeration value.
Fixes: b01d1cd213 ("examples/ipsec-secgw: support fragmentation and reassembly")
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch changes the key pointer data types in cipher, auth,
and aead xforms from "uint8_t *" to "const uint8_t *" for a
more intuitive and safe sessionn creation.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Liron Himi <lironh@marvell.com>
The timer subsystem should be initialized in the l3fwd-thread app before
the L-thread subsystem can be used.
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Cc: stable@dpdk.org
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
The state of virtio device has been defined in both header file and
source file, keep the definition in header file for public use.
Fixes: a50245ede7 ("examples/tep_term: initialize VXLAN sample")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Right now app blindly set IPv4 ether type for all non IPv6 packets.
Instead we can save and later restore original type value.
Fixes: 74de12b7b6 ("examples/ip_fragmentation: overhaul")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With latest changes l3fwd_simple_forward() blindly set
(PKT_TX_IPV4 | PKT_TX_IP_CKSUM) ol_flags for all IPv4 packets.
Though for un-fragmented packets we also do have to set l3_len
to make HW IP cksum offload to work properly.
That causes HW/PMD to drop or generate invalid packets.
Though for un-fragmented packets we don't need to regenerate
IPv4 cksum, as L3 header is not modified.
Fix by setting ol_flags only when required.
Fixes: 16863bbb4a ("examples/ip_fragmentation: enable IP checksum offload")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Modify ip_fragmentation example app to use rte_eth_info_get instead
of global rte_eth_devices structure.
Apps should not be using internal DPDK data structures directly.
Fixes: 9758b956dc ("examples/ip_fragmentation: fix Tx queues init")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Modify ipsec-secgw example app to use rte_eth_dev_info_get instead of
rte_eth_dev.
Apps should not be using internal DPDK data structures directly.
Fixes: a4677f7836 ("examples/ipsec-secgw: add target queues in flow actions")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Modify l3fwd and related example apps to use locally defined port_conf
instead of global rte_eth_devices which is not a part of public API.
Apps should not be using internal DPDK data structures directly.
Fixes: 1ef9600b2d ("examples/l3fwd: convert to ethdev offloads API")
Fixes: ba8c103d24 ("examples/l3fwd-acl: convert to new ethdev offloads API")
Fixes: 40df1d7a69 ("examples/l3fwd-power: convert to new ethdev offloads API")
Fixes: 43fc038262 ("examples/l3fwd-vf: convert to new ethdev offloads API")
Fixes: 373149c631 ("examples/performance-thread: convert to new offloads API")
Cc: stable@dpdk.org
Signed-off-by: Marcin Zapolski <marcinx.a.zapolski@intel.com>
While the core frequency scale-up and scale down all works fine with the
fifo-per-core functionality, there was a gap for policy handling. When
creating or destroying a policy, the core associated with the FIFO
needs to be automatically added to the core list, so the policy is
associated with the correct core.
Fixes: 221e7026d5 ("examples/power: add FIFO per core for JSON interface")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Current implementation only outputs 3 numbers for busyness, 0, 50 and 100.
Fix this so that the 50% is replaced by a curve, more meaningful.
This can be replaced in each use case by a suitable calculation for
that use case.
Fixes: 609e79841f ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
replace strcpy with strlcpy to prevent buffer overrun
With fix, attempting to use a VERY lonng vm name results in a nicely
truncated 32 character name rather than a segfault:
Setting VM Name to [sdfdsfsfsdffdsdsasdsadasdakjshd]
Using strlcpy rather than rte_strlcpy, as the rte_ version is only a
fallback.
As well as the fix in main.c, this patch also changes an occurrence of
rte_strlcpy in channel_manager.c and channel_monitor.c to strlcpy.
Fixes: 59287933a0 ("examples/vm_power: add options to guest app")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Samples apps that depend on the power library should not build if
the power library is not present. So now the following apps will
check to see if it's built, else skip building.
* l3fwd-pwer
* vm_power_manager
* guest_cli
Fixes: e013078857 ("examples/power: support meson/ninja build")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
6 issues caught by Coverity 343465
* Possible divide by zero on 3 lines
* Convert to float then back to int, losing precision on 3 lines
This patch modifies the code so that it only assigns calculated
values if the divisor is > 0, otherwise sets metrics to zero.
Also removes the un-needed round() function.
Coverity issue: 343465
Fixes: 609e79841f ("examples/l3fwd-power: add telemetry mode")
Signed-off-by: David Hunt <david.hunt@intel.com>
This patch implements a separate FIFO for each cpu core to improve the
previous functionality where anyone with access to the FIFO could affect
any core on the system. By using appropriate permissions, FIFO interfaces
can be configured to only affect the particular cores.
Because each FIFO is per core, the following fields have been removed
from the command JSON format: core_list, resource_id, name.
Signed-off-by: Lukasz Krakowiak <lukaszx.krakowiak@intel.com>
Signed-off-by: Lukasz Gosiewski <lukaszx.gosiewski@intel.com>
Signed-off-by: Marcin Hajkowski <marcinx.hajkowski@intel.com>
Tested-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The current implementation using the '__sync' built-ins to synchronize
statistics within worker threads. The '__sync' built-ins functions are
full barriers which will affect the performance, so add a per worker
packets statistics to remove the synchronisation between worker threads.
Since the maximum core number can get to 256, so disable the per core
stats print in default and add the --insight-worker option to enable it.
For example:
sudo examples/packet_ordering/arm64-armv8a-linuxapp-gcc/packet_ordering \
-l 112-115 --socket-mem=1024,1024 -n 4 -- -p 0x03 --insight-worker
RX thread stats:
- Pkts rxd: 226539223
- Pkts enqd to workers ring: 226539223
Worker thread stats on core [113]:
- Pkts deqd from workers ring: 77557888
- Pkts enqd to tx ring: 77557888
- Pkts enq to tx failed: 0
Worker thread stats on core [114]:
- Pkts deqd from workers ring: 148981335
- Pkts enqd to tx ring: 148981335
- Pkts enq to tx failed: 0
Worker thread stats:
- Pkts deqd from workers ring: 226539223
- Pkts enqd to tx ring: 226539223
- Pkts enq to tx failed: 0
TX stats:
- Pkts deqd from tx ring: 226539223
- Ro Pkts transmitted: 226539168
- Ro Pkts tx failed: 0
- Pkts transmitted w/o reorder: 0
- Pkts tx failed w/o reorder: 0
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
As per the documentation to use any IP offload features, application
must set required offload flags into mbuf->ol_flags.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As per the documentation to use any IP offload features, application
must set required offload flags into mbuf->ol_flags.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch updates the ipsec-secgw application to support
header reconstruction. In addition a series of tests have
been added to prove the implementation's correctness.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add simple test-case with all traffic in BYPASS mode.
Useful for some basic test of your network environment.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add optional ability to fragment packet bigger then mtu,
and reassemble fragmented packet.
To minimize possible performance effect, reassembly is
implemented as RX callback.
To support these features ipsec-secgw relies on librte_ipsec ability
to handle multi-segment packets.
Also when reassemble/fragmentation support is enabled, attached
crypto devices have to support 'In Place SGL' offload capability.
To enable/disable this functionality, two new optional command-line
options are introduced:
--reassemble <val> - number of entries in reassemble table
--mtu <val> - MTU value for all attached ports
As separate '--mtu' option is introduced, '-j <val>' option is now used
to specify mbuf data buffer size only.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
