Device detach triggered through IPC leaked some memory.
It allocated a devargs objects just to use it for
parsing the devargs string in order to retrieve the
device name. Those devargs weren't passed anywhere
and were never freed.
First of all, let's put those devargs on the stack,
so they doesn't need to be freed. Then free the
additional arguments string as soon as it's allocated,
because we won't need it.
Fixes: ac9e4a1737 ("eal: support attach/detach shared device from secondary")
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Consider the following scenario:
1) primary process (A) starts, probes the bus
2) a secondary process (B) starts, probes the bus
3) yet another secondary process (C) starts
4) (C) registers the pci driver and hotplugs the device
* an IPC attach req is sent to the primary (A)
* (A) ignores the -EEXIST from process-local probe
* (A) propagates the request to all secondary processes
* (B) responds with -EEXIST
* (A) replies to the original request with the -EEXIST
return code
* the -EEXIST is returned back to the user, although the
device was successfully attached both locally and in
all other processes
This patch makes the primary process reply with rc=0 even if
there was another secondary process with the device already
attached. The primary process already didn't reply with -EEXIST
when the device was attached locally, so now this behavior is
even more consistent. Looking by the code, this seems to be the
originally intended behavior.
Fixes: ac9e4a1737 ("eal: support attach/detach shared device from secondary")
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When primary process receives an IPC attach request
of a device that's already locally-attached, it
doesn't setup its variables properly and is prone to
segfaulting on a subsequent rollback.
`ret = local_dev_probe(req->devargs, &dev)`
The above function will set `dev` pointer to the
proper device *unless* it returns with error. One of
those errors is -EEXIST, which the hotplug function
explicitly ignores. For -EEXIST, it proceeds with
attaching the device and expects the dev pointer to
be valid.
This patch makes `local_dev_probe` set the dev pointer
even if it returns -EEXIST.
Fixes: ac9e4a1737 ("eal: support attach/detach shared device from secondary")
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If a device fails to attach before it's plugged,
the subsequent rollback will still try to detach it,
causing a segfault. Unplugging a device that wasn't
plugged isn't really supported, so this patch adds
an extra error check to prevent that from happening.
While here, fix this also for normal (non-rollback)
detach, which could also theoretically segfault on
non-plugged device.
Fixes: 244d513071 ("eal: enable hotplug on multi-process")
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Setting up a device that wasn't setup in the primary
process will possibly break the primary process. That's
because the IPC message to retrieve the group fd in the
primary will also *open* that group if it wasn't opened
before. Even though the secondary process closes that fd
soon after as a part of its error handling path, the
primary process leaks it.
What's worse, opening that fd on the primary will
increment the process-local counter of opened groups.
If it was 0 before, then the group will never be added
to the vfio container, nor dpdk memory will be ever
mapped.
This patch moves the proper error checks earlier in the
code to fully prevent setting up devices in secondary
processes that weren't setup in the primary process.
Fixes: 2f4adfad0a ("vfio: add multiprocess support")
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The pci_resource_by_index called strlen() on uninitialized
memory which would lead to the wrong size of memory allocated
for the path portion of the resource map. This would either cause
excessively large allocation, or worse memory corruption.
Coverity issue: 300868
Fixes: ea9d56226e ("pci: introduce function to map uio resource by index")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In case of running with not enough capabilities, i.e. running as
non-root user any application linked with DPDK prints the message
about IOPL call failure even if it was just called like
'./testpmd --help'. For example, this breaks most of the OVS unit
tests if it built with DPDK support.
Let's register the virtio driver unconditionally and print error
message while probing the device. Silent iopl() call left in the
constructor to have privileges as early as possible as it was before.
Fixes: 565b85dcd9 ("eal: set iopl only when needed")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
If rte_eal_iopl_init() will be called more than once we'll leak
the file descriptor.
Fixes: b46fe31862 ("eal/bsd: fix virtio on FreeBSD")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This commit improves the programmer guide of the hash
library to be more accurate on new features introduced
in 18.11.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Signed-off-by: Sameh Gobriel <sameh.gobriel@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The --server-socket-path and --client-socket-path options
have already been removed. So also remove them from the doc
to avoid confusion.
Fixes: 09f4aa2b95 ("app/pdump: remove unused socket path options")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add a paragraph to the patch contribution guide suggesting that developers
keep doc updates in the same patch as the code, rather than one big
doc update as the final patch in a patch set.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added a note into the coding style to
highlight the use of a bool within a struct
Signed-off-by: Marko Kovacevic <marko.kovacevic@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
It was agreed by the Technical Board to increase the minimal
supported Linux version, and written in Linux guide.
An announce was missing in the deprecation notices.
Fixes: 8c58f1b837 ("doc: note minimun Linux version increase for 19.02")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
There will be change in API functions because of mbuf sched field
updates, outlined in deprecation note of mbuf->hash.sched.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Below are details and reasoning for proposed changes.
1.rte_cryptodev_sym_session_init()/ rte_cryptodev_sym_session_clear()
operate based on cytpodev device id, though inside
rte_cryptodev_sym_session device specific data is addressed
by driver id (not device id).
That creates a problem with current implementation when we have
two or more devices with the same driver used by the same session.
Consider the following example:
struct rte_cryptodev_sym_session *sess;
rte_cryptodev_sym_session_init(dev_id=X, sess, ...);
rte_cryptodev_sym_session_init(dev_id=Y, sess, ...);
rte_cryptodev_sym_session_clear(dev_id=X, sess);
After that point if X and Y uses the same driver,
then sess can't be used by device Y any more.
The reason for that - driver specific (not device specific)
data per session, plus there is no information
how many device instances use that data.
Probably the simplest way to deal with that issue -
add a reference counter per each driver data.
2.rte_cryptodev_sym_session_set_user_data() and
rte_cryptodev_sym_session_get_user_data() -
with current implementation there is no defined way for the user to
determine what is the max allowed size of the private data.
rte_cryptodev_sym_session_set_user_data() just blindly copies
user provided data without checking memory boundaries violation.
To overcome that issue propose to add 'uint16_t priv_size' into
rte_cryptodev_sym_session structure.
3.rte_cryptodev_sym_session contains an array of variable size for
driver specific data.
Though number of elements in that array is determined by static
variable nb_drivers, that could be modified by
rte_cryptodev_allocate_driver().
That construction seems to work ok so far, as right now users register
all their PMDs at startup, though it doesn't mean that it would always
remain like that.
To make it less error prone propose to add 'uint16_t nb_drivers'
into the rte_cryptodev_sym_session structure.
At least that allows related functions to check that provided
driver id wouldn't overrun variable array boundaries,
again it allows to determine size of already allocated session
without accessing global variable.
4.#2 and #3 above implies that now each struct rte_cryptodev_sym_session
would have sort of readonly type data (init once at allocation time,
keep unmodified through session life-time).
That requires more changes in current cryptodev implementation:
Right now inside cryptodev framework both rte_cryptodev_sym_session
and driver specific session data are two completely different sctrucures
(e.g. struct cryptodev_sym_session and struct null_crypto_session).
Though current cryptodev implementation implicitly assumes that driver
will allocate both of them from within the same mempool.
Plus this is done in a manner that they override each other fields
(reuse the same space - sort of implicit C union).
That's probably not the best programming practice,
plus make impossible to have readonly fields inside both of them.
To overcome that situation propose to changed an API a bit, to allow
to use two different mempools for these two distinct data structures.
5. Add 'uint64_t userdata' inside struct rte_cryptodev_sym_session.
I suppose that self-explanatory, and might be used in a lot of places
(would be quite useful for ipsec library we develop).
The new proposed layout for rte_cryptodev_sym_session:
struct rte_cryptodev_sym_session {
uint64_t userdata;
/**< Can be used for external metadata */
uint16_t nb_drivers;
/**< number of elements in sess_data array */
uint16_t priv_size;
/**< session private data will be placed after sess_data */
__extension__ struct {
void *data;
uint16_t refcnt;
} sess_data[0];
/**< Driver specific session material, variable size */
};
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Add 'uint64_t opaque_data' inside struct rte_security_session.
That allows upper layer to easily associate some user defined
data with the session.
Proposed new layout for:
struct rte_security_session {
void *sess_private_data;
/**< Private session material */
+ uint64_t opaque_data;
+ /**< Opaque user defined data */
};
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Maximum and minimum MTU values vary between hardware devices. In
hardware agnostic DPDK applications access to such information would
allow a more accurate way of validating and setting supported MTU values on
a per device basis rather than using a defined default for all devices.
The following solution was proposed:
http://mails.dpdk.org/archives/dev/2018-September/110959.html
This patch adds a depreciation notice for ``rte_eth_dev_info`` as new
members will be added to represent min and max MTU values. These can be
added to fit a hole in the existing structure for amd64 but not for 32 bit,
as such ABI change will occur as size of the structure will be impacted.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_dpaa2_memsegs is no more required once the dpaax (pa-va) translation
library has been introduced. This can be made internal (for fallback
operations) in subsequent release.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
After processing a kvlist in rte_kvargs_process(),
it may be needed to loop again over kvlist in order to know
whether the key is matched or not.
In order to simplify implementation of kvargs checks,
a new pointer parameter may be used to get the match count.
The change of the function prototype would be as below:
int
rte_kvargs_process(const struct rte_kvargs *kvlist,
const char *key_match,
+ int *match_count,
arg_handler_t handler,
void *opaque_arg)
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Currently, the most complete (but still incomplete) user guide for
EAL command-line parameters resides in user guide for testpmd.
This is wrong on multiple levels, and should not be the case.
To fix it, we have to create a document that lists all supported
EAL command-line arguments. However, because different platforms
support different subsets of available EAL parameters, instead of
creating a single file, we will create a common file in
doc/guides/common containing documentation for EAL parameters
that are supported on all of our supported platforms (Linux and
FreeBSD at the time of this writing).
We will then include this document in the Getting Started guides
for all supported platforms, so that any changes made to
documentation for commonly supported EAL parameters will be
reflected in Getting Started guides for all platforms.
This patch also removes EAL parameters documentation from the
testpmd user guide, and instead adds references to the newly
created documents in both testpmd user guides and in sample
applications guide.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Rami Rosen <roszenrami@gmail.com>
Add tested Intel platforms with Intel NICs to the release note.
Signed-off-by: Lijuan Tu <lijuan.tu@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
When device has been bound to igb_uio driver and application is running,
hot-unplugging the device may cause kernel crash.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Document that AVX512F has been disabled for GCC builds [1] and document
its potential implications on release notes, known issue section.
[1]
Commit 8d07c82b23 ("mk: disable gcc AVX512F support")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The PCI bus is an independent driver and not part of EAL
as it was in the early days.
EAL must be understood as a generic layer.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
The references to the figures and tables in the index
are not maintained.
It is probably better to have no list than an incomplete list.
Anyway the usage of such figures list is not obvious.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
The packed ring defines were declared only if kernel
header does not declare them.
The problem is that they are not applied in upstream kernel,
and some changes in the names have been required.
This patch declares the defines unconditionally, which
fixes potential build issues.
Fixes: 297b1e7350 ("vhost: add virtio packed virtqueue defines")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch adds limitation notice for MLX5 PMD regarding
VXLAN tunnels support on E-Switch Flows.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The VLAN push action on E-Switch supports only 802.1Q (0x8100)
and 802.1AD (0x88A8) Tag Protocol ID (TPID) insertions. The
parameter check for RTE_FLOW_ACTION_TYPE_OF_PUSH_VLAN action
is added.
Fixes: 57123c00c1 ("net/mlx5: add Linux TC flower driver for E-Switch flow")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The TCA_FLOWER_KEY_VLAN_ETH_TYPE should be specified for the E-Switch
Flows with VLAN and L3 pattern items in the Netlink messages. The patch
adds missing flower key to the messages. This patch partially reverts to
the code smashed by http://patches.dpdk.org/patch/47781
Fixes: 251e8d02cf ("net/mlx5: add VXLAN to flow translate routine")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The only time that software should write to the TDH register
is after a reset (hardware reset or CTRL.RST) and
before enabling the transmit function (TXDCTL.ENABLE).
If software were to write to this register while the transmit
function was enabled, the on-chip descriptor buffers might
be invalidated and the hardware could become confused.
Fixes: 029fd06d40 ("ixgbe: queue start and stop")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Following commit updated the Tx offload mask
commit 1037ed842c ("mbuf: fix Tx offload mask").
So, not having PKT_TX_IPV6 and PKT_TX_IPV4 in qede PMDs supported
Tx offload mask breaks TSO support since application will fail in transmit
prepare function.
Fixes: 1037ed842c ("mbuf: fix Tx offload mask")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
rx_buffer_info should be refill not linearly, but out of order.
IDs should be taken from empty_rx_reqs array.
rx_refill_buffer is introduced to temporary storage
bulk of mbufs taken from pool.
In case of error unused mbufs are put back to pool.
Fixes: c203497667 ("net/ena: add Rx out of order completion")
Cc: stable@dpdk.org
Signed-off-by: Rafal Kozik <rk@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
The memcpy operation overwrites the device info fields set
by ethdev API and leaves the device field undefined.
Thus, replaces memcpy by only updating the required fields
at the driver layer.
error log: testpmd> show port info 1
**** Infos for port 1 ****
MAC address: 00:00:00:00:00:00
Device name: net_softnic0
Segmentation fault.
port_infos_display (port_id=1) at /dpdk/app/test-pmd/config.c:418
if (dev_info.device->devargs && dev_info.device->devargs->args)
Fixes: cc6d421574 ("net/softnic: add softnic PMD")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
DEFERRED state replaced by ownership concept and it is no more used as
code comment states.
ethdev ABI broken on this release use this opportunity to remove
DEFERRED state.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch fixes the mismatch keyword in vhost_crypto sample
application guide.
Fixes: 709521f4c2 ("examples/vhost_crypto: support multi-core")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
DCR is Intel internal information, no need to be in public code.
Fixes: de2cd512b1 ("net/i40e/base: new AQ commands for cloud filter")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some kernel drivers are not able to handle the link status correctly
after DPDK application sets the PHY to link down.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Following APIs are not currently implemented by any of the
drivers, so marking them as rte_experimental again.
Fixes: 1a81dce780 ("security: remove experimental tag")
rte_security_get_userdata;
rte_security_session_stats_get;
rte_security_session_update;
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
When running dpdk applications on cores whose ids are bigger
than original max_core setting, eal error as below:
EAL: Detected 104 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: invalid core list
-l CORELIST core indexes between 0 and 128
The fix is to increase max_core to 256 on arm64 platform.
Fixes: b3ce00e5 ("mk: introduce ARMv8 architecture")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
In the eth Rx adapter SW service function,
move the return to after the spinlock unlock.
Coverity issue: 302857
Fixes: a66a837446 ("eventdev: fix Rx SW adapter stop")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
When compiling with -O1, this error can appear:
app/test-eventdev/test_pipeline_common.c:332:6: error:
‘ret’ may be used uninitialized in this function
If there is no device, then ret is returned without being initialized.
It is fixed by setting 0 as initial value.
Fixes: 032a965a8f ("app/eventdev: support Tx adapter")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When compiling with -O1, this error can appear:
lib/librte_eventdev/rte_event_eth_tx_adapter.c:705:6: error:
‘ret’ may be used uninitialized in this function
If tx_queue_id is -1 and nb_queues is 0, then ret is returned
without being initialized.
It is fixed by setting 0 as initial value.
Fixes: a3bbf2e097 ("eventdev: add eth Tx adapter implementation")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
When compiling with gcc -O1, this error appears:
drivers/net/mlx4/mlx4_ethdev.c: In function ‘mlx4_rxmode_toggle’:
rte_log.h:321:3: error:
‘mode’ may be used uninitialized in this function
The function mlx4_rxmode_toggle is never called with a value which
is not in the switch block, but GCC complains about it with -O1.
So the default case is "fixed" by setting string "undefined".
Fixes: eacaac7bae ("net/mlx4: restore promisc and allmulti support")
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
