Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Running the devtools/test-build.sh script on IBM Power systems fails
because the IXGBE_PMD is explicity disabled for Power as an untested
driver, but the examples/vm_power_manager application has a hard
dependency on a function call in the IXGBE_PMD.
Modify the example application so that all dependencies on PMD code
are conditionally compiled.
Bugzilla ID: 237
Fixes: c9a4779135c9 ("examples/vm_power_mgr: set MAC address of VF")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Hunt <david.hunt@intel.com>
A for loop to MAX_VFS had a break as the last line, so the w++
would never get called, breaking out of the loop after the
first iteration. Remove the break so that the loop can execute
properly.
Coverity issue: 337682
Fixes: ace158c4a821 ("examples/vm_power: add check for port count")
Cc: stable@dpdk.org
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
This patch adds a fifo channel to the vm_power_manager app through which
we can send commands and polices. Intended for sending JSON strings.
The fifo is at /tmp/powermonitor/fifo
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
For different workloads and poll loops, the theshold
may be different for when you want to scale up and down.
This patch allows changing of the default branch ratio
by using the -b command line argument (or --branch-ratio=)
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Change the app to now require three cores, as the third core
will be used to run the oob montoring thread.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add in the '-l' command line parameter (also --core-list)
So the user can now pass --corelist=4,6,8-10 and it will
expand out to 4,6,8,9,10 using the parse function provided
in parse.c (parse_set).
This list of cores is then used to enable out-of-band monitoring
to scale up and down these cores based on the ratio of branch
hits versus branch misses. The ratio will be low when a poll
loop is spinning with no packets being received, so the frequency
will be scaled down.
Also , as part of this change, we introduce a core_info struct
which keeps information on each core in the system, and whether
we're doing out of band monitoring on them.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
If we don't pass any ports to the app, we don't need to create
any mempools, and we don't need to init any ports.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b717d ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Current code only sets mac address of first VF. Fix code so that it
continues through the loop and sets the mac address of each VF.
Fixes: c9a4779135c9 ("examples/vm_power_mgr: set MAC address of VF")
Cc: stable@dpdk.org
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
We need to set vf mac from the host, so that they will be in sync on the
guest and the host. Otherwise, we'll have a random mac on the guest, and
a 00:00:00:00:00:00 mac on the host.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
We need to initialise the port's we're monitoring to be able to see
the throughput.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The file rte_config.h is automatically generated and included.
No need to #include it.
The example performance-thread needs a makefile fix to avoid
overwriting the default cflags.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
For launching CLI thread and Monitor thread and initialising
resources.
Requires a minimum of two lcores to run, additional cores specified by eal core
mask are not used.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
