To allow other projects to easily use DPDK as a subproject, add in the
necessary dependency definitions. Slightly different definitions are
necessary for static and shared builds, since for shared builds the
drivers should not be linked in, and the internal meson dependency
objects are more complete.
To use DPDK as a subproject fallback i.e. use installed DPDK if present,
otherwise the shipped one, the following meson statement can be used:
libdpdk = dependency('libdpdk', fallback: ['dpdk', 'dpdk_dep'])
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ben Magistro <koncept1@gmail.com>
Tested-by: Ben Magistro <koncept1@gmail.com>
At device probe, the fslmc bus driver calls rte_vfio_get_group_fd() to
get a fd associated to a vfio group. This function first checks if the
group is already opened, else it opens /dev/vfio/%u, and increases the
number of active groups in default_vfio_cfg (which references the
default vfio container).
When adding the first group to a vfio_cfg, the caller is supposed to
pick an IOMMU type and set up DMA mappings for container, as it's done
by pci bus, but it is not done here. Instead, a new container is created
and used.
This prevents the pci bus driver, which uses the default_vfio_cfg
container, to configure the container because
default_vfio_cfg->active_group > 1.
This patch fixes the issue by always creating a new container (and its
associated vfio_cfg) and binding the group to it.
Fixes: a69f793002 ("bus/fslmc: support multi VFIO group")
Cc: stable@dpdk.org
Signed-off-by: Romain Delhomel <romain.delhomel@6wind.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch replaces instances of zero-sized arrays i.e. those at the end
of structures with "[0]" with the more standard syntax of "[]".
Replacement was done using coccinelle script, with some revert and
cleanup of whitespace afterwards.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
PAC N6000 is the first OFS platform, its device id is added to ifpga
device support list.
Previous FPGA platform like Intel PAC N3000 and N5000, FME DFL (Device
Feature List) starts from BAR0 by default, port DFL location is indicated
in PORTn_OFFSET register in FME. In OFS implementation, FME DFL and port
DFL location can be defined individually in PCIe VSEC (Vendor Specific
Extended Capabilities). In this patch, DFL definition is searched in VSEC,
the legacy DFL is used only when DFL VSEC is not present.
In original DFL enumeration process, AFU is expected to locate in port DFL,
but this is not the case in OFS implementation. In this patch, enumeration
can search AFU in any PF/VF which has no FME and port.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
There is an API rte_pmd_ifpga_cleanup provided by ifpga driver to
free the software resource used by ifpga card. The function call
of rte_pmd_ifpga_cleanup is list below.
rte_pmd_ifpga_cleanup()
ifpga_rawdev_cleanup()
rte_rawdev_pmd_release()
rte_rawdev_close()
ifpga_rawdev_close()
The interrupts are unregistered in ifpga_rawdev_destroy instead of
ifpga_rawdev_close function, so rte_pmd_ifpga_cleanup cannot free
interrupt resource as expected.
To fix such issue, interrupt unregistration is moved from
ifpga_rawdev_destroy to ifpga_rawdev_close function. The change of
function call of ifpga_rawdev_destroy is as below.
ifpga_rawdev_destroy()
ifpga_unregister_msix_irq() // removed
rte_rawdev_pmd_release()
rte_rawdev_close()
ifpga_rawdev_close()
Fixes: e0a1aafe2a ("raw/ifpga: introduce IRQ functions")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Virtual devices created on ifpga raw device will not be removed
when ifpga device has closed. To avoid resource leak problem,
this patch introduces an ifpga virtual device remove function,
virtual devices will be destroyed after the ifpga raw device closed.
Fixes: ef1e8ede3d ("raw/ifpga: add Intel FPGA bus rawdev driver")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
These APIs are introduced in DPDK 21.05 and have been tested in several
release, experimental tag can be formally removed.
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
The device config script currently uses some defaults to configure
devices in a generic way.
With the addition of this option, users have more control over how
queues are configured.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Sunil Pai G <sunil.pai.g@intel.com>
The CQ (completion queue) descriptors were updated by hardware, and then
scanned by driver to retrieve hardware completion status.
This patch enhances robustness by following:
1. replace while (true) with a finite loop to avoid potential dead loop.
2. check the csq_head field in CQ descriptor to avoid status array
overflows.
Fixes: 2db4f0b823 ("dma/hisilicon: add data path")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
If no DMA request is completed, the ring_idx of the last completed
operation need returned by last_idx parameter. This patch fixes it.
Fixes: 2db4f0b823 ("dma/hisilicon: add data path")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
ESP item is not supported on Windows, yet it is expanded from the
expansion graph when trying to create default flow to RSS all packets.
Support ESP item match (without ability to match on SPI field on Windows).
Split ESP validation per OS.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The mlx5_action_construct_data structure memory is managed by ipool
named acts_ipool.
The size of one entry in this ipool is mistakenly defined as size of
rte_flow_hw structure.
This size is used to reset in the allocated part. When the size is
incorrect it resets memory that does not belong to it.
This patch defines the correct size.
Fixes: f13fab2392 ("net/mlx5: add flow jump action")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
While non-lcore list operations were supported, non-lcore index will
be converted to MLX5_LIST_NLCORE. In that case, no need to check the
lcore index be -1 or not anymore.
This commit removes the unused lcore check in list.
Fixes: 7e1cf89271 ("common/mlx5: support list non-lcore operations")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Kernel iavf driver has sent patch to increase the completion
wait time to reduce the "Reset never finished" case.
Follow this action in DPDK iavf driver.
Kernel reference commit:
8e3e4b9da7e6 ("iavf: increase reset complete wait time")
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When kernel driver does not support quanta size configuration,
it will return error. We do not expect it to occur in default
initialization process.
Fixes: b14e8a57b9 ("net/iavf: support quanta size configuration")
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Added I226 Series device ID in igc driver and updated igc guide
document for new devices.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Move security context destroy from device stop to device close function.
Deleting the context on device stop can prevent the application from
properly cleaning and releasing resources.
Fixes: 6bc987ecb8 ("net/iavf: support IPsec inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When the inline crypto feature VF capability flag is set also check if the
feature is enabled, otherwise the initialization will fail even when
the inline crypto is not required.
Fixes: 6bc987ecb8 ("net/iavf: support IPsec inline crypto")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In multi-cores cases for Rx timestamp offload, if packets arrive
too fast, aq command to get phc time will be pended.
This patch adds spinlock to fix this issue. To avoid phc time being
frequently overwritten, move related variables to iavf_rx_queue
structure, and each queue will handle timestamp calculation by itself.
Fixes: b5cd735132 ("net/iavf: enable Rx timestamp on flex descriptor")
Fixes: 33db16136e ("net/iavf: improve performance of Rx timestamp offload")
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable Protocol Agnostic Flow Offloading for RSS hash in VF. It supports
raw pattern flow rule creation in VF based on Parser Library feature. VF
parses the spec and mask input of raw pattern, and passes it to kernel
driver to create the flow rule. Current rte_flow raw API is utilized.
command example:
RSS hash for ipv4-src-dst:
flow create 0 ingress pattern raw pattern spec
00000000000000000000000008004500001400004000401000000000000000000000
pattern mask
0000000000000000000000000000000000000000000000000000ffffffffffffffff /
end actions rss queues end / end
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enabled Protocol Agnostic Flow (raw flow) Offloading Flow
Director (FDIR) in AVF, based on the Parser Library feature and the
existing rte_flow `raw` API.
The input spec and mask of raw pattern are first parsed via the
Parser Library, and then passed to the kernel driver to create the
flow rule.
Similar as ice PMD's implemnentation, each raw flow requires:
1. A byte string of raw target packet bits.
2. A byte string contains mask of target packet.
Here is an example:
FDIR matching ipv4 dst addr with 1.2.3.4 and redirect to queue 3:
flow create 0 ingress pattern raw \
pattern spec \
00000000000000000000000008004500001400004000401000000000000001020304 \
pattern mask \
000000000000000000000000000000000000000000000000000000000000ffffffff \
/ end actions queue index 3 / mark id 3 / end
Note that mask of some key bits (e.g., 0x0800 to indicate ipv4 proto)
is optional in our cases. To avoid redundancy, we just omit the mask
of 0x0800 (with 0xFFFF) in the mask byte string example. The prefix
'0x' for the spec and mask byte (hex) strings are also omitted here.
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The patch extends existing virtchnl_proto_hdrs structure to allow VF
to pass a pair of buffers as packet data and mask that describe
a match pattern of a filter rule. Then the kernel PF driver is requested
to parse the pair of buffer and figure out low level hardware metadata
(ptype, profile, field vector.. ) to program the expected FDIR or RSS
rules.
Also update the proto_hdrs template init to align the virtchnl changes.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For Rx-Queue Interrupt Setting, when VF Rx interrupt
disable (INTENA=0), there are two ways to write back
descriptor to host memory:
1) Set WB_ON_ITR bit 0 to Interrupt Dynamic Control Register:
Completed descriptors are posted to host memory according to
the internal descriptor cache policy (in other words when a
full cache line is available for write-back).
A internal descriptor size is 16 bytes or 32 bytes, a cache
line size is 64 bytes or 128 bytes from datasheet :
PCIe Global Config 2 - GLPCI_CNF2 (0x000BE004; RO)
so the full cache line could contains 4 packets, it means
Network card will send 4 packets to host when a full cache line
is available.
2) Set WB_ON_ITR bit 1 to Interrupt Dynamic Control Register:
Completed descriptors also trigger the ITR. Following ITR
expiration, all leftover completed descriptors are posted to
host memory.
Network card will send packet to host even if only one
descriptor is completed.
Changing 1) to 2) to make sure VF send the packet to host even
if there is only one Rx packet is ready in hardware.
Fixes: d6bde6b5ea ("net/avf: enable Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Ke Zhang <ke1x.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the multiple process environment, the subprocess operates on the
shared memory and changes the function pointer of the main process,
resulting in the failure to find the address of the function when main
process releasing, resulting in crash.
Fixes: 319c421f38 ("net/avf: enable SSE Rx Tx")
Cc: stable@dpdk.org
Signed-off-by: Ke Zhang <ke1x.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If any queue start fail during dev_start, all started queues
should be stopped.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Previously, max frame size can only be set when link is up, and the wait
time is 1 sec. Startup time of 10G_BASET longer than 1s would result in
failure.
Actually, max frame size of media type I40E_MEDIA_TYPE_BASET can be set
regardless of link status.
This patch omitted the link status check of 10G_MEDIA_TYPE_BASET.
Fixes: a4ba773679 ("net/i40e: enable maximum frame size at port level")
Cc: stable@dpdk.org
Signed-off-by: Wenxuan Wu <wenxuanx.wu@intel.com>
Acked-by: Yuying Zhang <yuying.zhang@intel.com>
Some pointers will be set to NULL when iavf_dev_reset() failed,
for example vf->vf_res, vf->vsi_res vf->rss_key and etc.
APIs access these NULL pointers will trigger segfault.
This patch adds closed flag to indicate that the VF is closed,
and rejects API calls in this state to avoid coredump.
Fixes: e74e1bb628 ("net/iavf: enable port reset")
Cc: stable@dpdk.org
Signed-off-by: Yiding Zhou <yidingx.zhou@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In the DCF module, Missing maximum and minimum
MTU value settings.
This patch adds the settings of the maximum and
minimum MTU to correctly calculate the MTU value.
Fixes: bf89db4409 ("net/ice: complete device info get in DCF")
Cc: stable@dpdk.org
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The tx/rx packets were both dropped when creating drop any rule
for ingress direction only, the root cause is the recipe didn't
contain direction flag matching.
This patch adds the packet flag which represents the direction of
source interface to solve the issue.
Fixes: 92317961a7 ("net/ice: support drop any and steer all to queue")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Priority configuration is enabled in level 3 and level 4.
Weight configuration is enabled in level 4.
This patch adds warning log for unsupported priority
and weight configuration.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds queue and queue group priority configuration
support. The highest priority is 0, and the lowest priority
is 7.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable basic TM API for PF only. Support for adding profiles and queue
nodes. Only max bandwidth is supported in profiles. Profiles can be
assigned to target queues and queue group. To set up the exact queue
group, we need to reconfigure topology by delete and then recreate
queue nodes. Only TC0 is valid.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds priority configuration support of the exact
node in the scheduler tree.
This function does not need additional calls to the scheduler
lock.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds BW allocation support of queue scheduling node
to support WFQ in queue level.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The function ice_sched_get_node_by_id_type needs to be called
with the scheduler lock held. However, the function
ice_sched_get_node also requests the scheduler lock.
It will cause the dead lock issue.
This patch replaces function ice_sched_get_node with
function ice_sched_find_node_by_teid to solve this problem.
Fixes: 93e84b1bfc ("net/ice/base: add basic Tx scheduler")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
1ca05831b9 added a check that SDP3 (used as a TX_DISABLE output to the
SFP cage on these cards) is not asserted to avoid incorrectly reporting
link up when the SFP's laser is turned off.
ff8162cb95 limited this workaround to fiber ports
This patch:
* Adds devarg 'fiber_sdp3_no_tx_disable' not all fiber ixgbe devs use
SDP3 as TX_DISABLE
Fixes: 1ca05831b9 ("net/ixgbe: fix link status")
Fixes: ff8162cb95 ("net/ixgbe: fix link status")
Cc: stable@dpdk.org
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The new VLAN virtchnl opcodes introduce new capabilities like VLAN
filtering, stripping and insertion.
The DCF needs to query the VLAN capabilities based on current device
configuration firstly.
DCF is able to configure inner VLAN filter when port VLAN is enabled
base on negotiation; and DCF is able to configure outer VLAN (0x8100)
if port VLAN is disabled to be compatible with legacy mode.
When port VLAN is updated by DCF, the DCF needs to reset to query the
new VLAN capabilities.
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
To support the new DDP and be compatible with the old version DDP
file, API function 'check_ddp_support_proto_id' is added to detect
if the required protocol ID is supported by the current DDP file.
Add new protocol ID IPV6_NEXT_PROTO support for PF FDIR if current
DDP is new DDP and keep behavior if it is the old version DDP.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If PF driver don't support a flex Rx descriptor that required by VF,
legacy descriptor format will be negotiated to configure the hardware
queue.
The patch fixes the issue that an Rx data path that handle flexible
descriptor (e.g.:
iavf_recv_scattered_pkts_vec_avx512_flex_rxd) is selected while the
actual hardware queues are configured as legacy due to above scenario,
which will cause following coredump.
Fixes: 12b435bf8f ("net/iavf: support flex desc metadata extraction")
Cc: stable@dpdk.org
Signed-off-by: Yiding Zhou <yidingx.zhou@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Set an invalid quanta size from devargs will cause memory leak and this
is reported by coverity.
The patch fix the issue by correcting the error handle.
Coverity issue: 378017
Fixes: b14e8a57b9 ("net/iavf: support quanta size configuration")
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch encompasses a few fixes carried by a previous patch
that aimed to support bonding device stats counting.
- If mlx5_os_read_dev_stat fails, it returns 1 instead of a
negative value, causing mlx5_xstats_get to return an invalid
number of counters. Since this error is not blocking, do not
mess ret value with mlx5_os_read_dev_stat returned value.
This allows avoiding the very annoying log:
"n_xstats != n_xstats_names => skipping"
- Invert the check for mlx5_os_read_dev_stat(), currently leading
us to store the result if the function failed, and use a
backup value if it succeeded, which is the opposite of what we
actually want. Revert to the original (correct) test.
- Add missing test on _mlx5_os_read_dev_counters() to prevent
using trash stats values.
Fixes: 7ed15acdcd ("net/mlx5: improve xstats of bonding port")
Cc: stable@dpdk.org
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: Geoffrey Le Gourriérec <geoffrey.le_gourrierec@6wind.com>
Tested-by: Bassam Zaid AlKilani <bzalkilani@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add two kinds of Rx drop counters to DPDK xstats which are
physical port scope.
1. rx_prio[0-7]_buf_discard
The number of unicast packets dropped due to lack of shared
buffer resources.
2. rx_prio[0-7]_cong_discard
The number of packets that is dropped by the Weighted Random
Early Detection (WRED) function.
Prio[0-7] is determined by VLAN PCP value which is 0 by default.
Both counters are retrieved from kernel ethtool API which calls
PRM command finally.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
When an error occurs in Tx, and it is moved to ERROR state, it
is not recoverable, during recovery it's state cannot be modified
to INIT. to modify state from RESET to INIT, the port must be
passed in modify attributes, and in case of ERROR to READY
modification path, it was not provided.
Provide port number when changing state from RESET to INIT.
Fixes: 3a87b964ed ("net/mlx5: create Tx queues with DevX")
Cc: stable@dpdk.org
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Yellow meter action support is added in meter hierarchy validation.
If one color uses meter action, the other can only use NULL action
or the same meter action. And only shared meter is supported.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When a hierarchy meter is shared by other ports, it's needed to iterate
all meter policies in hierarchy to create tag rules, to set packet with
next meter ID, which will be used by related meter drop count.
This patch adds the tag rule for yellow support in hierarchy, so both
green/yellow policy flows can set the correct meter ID.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch adds the support of meter action for yellow meter policy
flow, so can use meter action for both green and yellow policy flows
in meter hierarchy.
Currently must use the same meter within one meter policy. Packets
passing green/yellow policy flow will have previous meter color of
green/yellow in subsequent meter.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
This patch adds the support for previous color aware for meter.
Start_color setting is set to UNDEFINED when creating meter object that
is color aware.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Register address is different between net and blk device.
We are re-using most of the code, when register address is
different, we have to check net and blk device go through
different code.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Create a thread to poll and relay config space change interrupt.
Use VHOST_USER_SLAVE_CONFIG_CHANGE_MSG to inform QEMU.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Add some log of virtio blk device config space information
at vDPA launch before QEMU connects.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Add SW live-migration support to block device.
For block device, it is critical that no packet
should be dropped. So when virtio blk device is
paused, make sure hardware last_avail_idx and
last_used_idx are the same. This indicates all
requests have received acks, and no inflight IO.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
For the net device type, only interrupt of rxq needed to be relayed.
But for block, since all the queues are used for both read and write
requests. Interrupt of all queues needed to be relayed.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
For virtio blk device, re-use part of ifc driver ops.
Implement ifcvf_blk_get_config for virtio blk device.
Support VHOST_USER_PROTOCOL_F_CONFIG feature for virtio
blk device.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Re-use the vdpa/ifc code, distinguish blk and net device by pci_device_id.
Blk and net device are implemented with proper feature and ops.
Signed-off-by: Andy Pei <andy.pei@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Now that we have Vhost statistics APIs, this patch replaces
Vhost PMD extended statistics implementation with calls
to the new API. It will enable getting more statistics for
counters that cannot be implemented at the PMD level.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Removed some macros that were defined but not used in this driver.
As a result, rte_smp_xx occurrence is removed from this driver.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Kathleen Capella <kathleen.capella@arm.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix ULP parser to ignore segment_offset of IPv4 header.
Currently the IPv4 handler is assuming default setting,
which causes the flow table to be updated incorrectly.
Fixes: 741172be52 ("net/bnxt: refactor flow parser in ULP")
Cc: stable@dpdk.org
Signed-off-by: Shuanglin Wang <shuanglin.wang@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This reverts commit 3972281f47.
Reported by Red Hat QE: with older firmware versions (at least versions
20.6.112.0 and 20.6.143.0), initialisation never succeeds following this
change.
Revert it for now, waiting for a more complete fix.
Fixes: 3972281f47 ("net/bnxt: fix device readiness check")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The MAC address is accessed via the representor ethdev's one.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The board admin may need to assign a MAC address to a guest
VNIC identified by its MCDI handle. Provide an API for that.
In the case when a libefx-based driver is used at the guest,
it will need to check its MAC address using the symmetrical
API if the admin has tweaked it by means of its representor.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
When the driver queries its PCIe interface type via MCDI,
the value from the response is translated to an EFX enum.
When the driver passes this enum value back to any other
MCDI helper, the inverse translation has to be conducted.
Fixes: 1bf9ff57cc ("common/sfc_efx/base: allow getting VNIC MCDI client handles")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Introduce a testpmd API so that drivers can register specific commands.
A driver can list some files to compile with testpmd, by setting them
in the testpmd_sources (driver local) meson variable.
drivers/meson.build then takes care of appending this to a global meson
variable, and adding the driver to testpmd dependency.
Note: testpmd.h is fixed to that it is self sufficient when being
included.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The packet type is set even if it is a fragmented packet.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Currently the driver assumes that the size of the RETA table is
four times the number of Rx queues at multiple places. However,
it sets it to four times the maximum number of queues (4 * 32 = 128)
when it first initializes the device. Change the other uses to use
the stored value, not the assumed default.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
VMXNET3 version 6 supports some new features, including but not limited to:
- Increased maximum MTU up to 9190
- Increased maximum number of Rx and Tx queues
- Removes power-of-two limitations on queue sizes
- Extended interrupt structures (required for additional queues)
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Support rte_eth_dev_fw_version_get() API.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Driver callbacks initialization should follow callbacks order in the
structure definition.
Do not reorder callbacks implementation to avoid extra noise in
the code.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Count the number of entries in the Rx queue for debugging.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
Add RETA query and RETA update support for VMXNET3.
Tested, using testpmd, for different hardware versions on ESXi 7.0
Update 2.
Signed-off-by: Pankaj Gupta <pagupta@vmware.com>
Reviewed-by: Jochen Behrens <jbehrens@vmware.com>
"vlan set strip off 0" can't work, due to the incorrect usage
of the mask, it just represent that the status is changed or not,
not represent offloaded or not, so that the driver send the
error control message to the nic.
Now, by first inspect the mask of things that changed, and then
change the requested state if VLAN stripping according the
requested offload status. So this change can fix this bug.
Fixes: d4a27a3b09 ("nfp: add basic features")
Cc: stable@dpdk.org
Signed-off-by: Peng Zhang <peng.zhang@corigine.com>
Signed-off-by: Yong Xu <yong.xu@corigine.com>
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Hardware restrictions require a maximum of 4 queues for every pool.
Fixes: a6712cd029 ("net/txgbe: add PF module init and uninit for SRIOV")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Add to read efuse values from flash, and disable EEE to improve signal
quality. Remove PHY semaphore to access PHY registers faster. And remove
unnecessary page selection where quick access is required.
When rte_eth_link_get_nowait() is called frequently with LSC disabled by
self-developed applications, eventually the PHY status register will be
accessed frequently. It will cause internal PHY init failure, if they
are done simultaneously. So there is a protection added for internal PHY
init.
Fixes: 3518df5774 ("net/ngbe: support device start/stop")
Fixes: 91bc12c522 ("net/ngbe: optimize PHY initialization process")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
When using mailbox to request firmware to enable or disable PCIe bus
master, there is a small probability that mailbox cannot respond.
Change to use rte_pci_read_config() and rte_pci_write_config(), to
avoid this problem.
Fixes: ac6c5e9af5 ("net/ngbe: fix Tx hang on queue disable")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
For M88E1512 PHY mixed mode, PXE driver overrides PHY mode at load
time. To workaround this problem, change to read PHY mode from flash
instead of register.
Fixes: 1c44384fce ("net/ngbe: support custom PHY interfaces")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
External PHY cannot power down after LAN reset, so need to manually
power down when device stopped.
Fixes: 3d0af70667 ("net/ngbe: setup PHY link")
Fixes: 1c44384fce ("net/ngbe: support custom PHY interfaces")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Change to check low ID register to determine the valid PHY address,
for yt8521s PHY with high ID register value 0. And fix polling
register when expect value is 0, to complete MDIO read.
Fixes: 44e97550ca ("net/ngbe: identify and reset PHY")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Since the bit of ETH_LINK_SPEED_FIXED was set for the force link
speed, it conflicts with '~allowed_speeds'.
Fixes: 3518df5774 ("net/ngbe: support device start/stop")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
The 'dst_off' was reset in multi segment case.
This caused memif buffer segment to write to
beginning of mbuf, overwriting previous data.
Fix it with this patch.
Fixes: 09c7e63a71 ("net/memif: introduce memory interface PMD")
Cc: stable@dpdk.org
Reported-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Usage of 'RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE' offload has two
constraints: per-queue all mbufs comes from the same mempool and
has refcnt = 1.
Bonding mode Broadcast, Tx mbuf has more than one refcnt.
Bonding mode 8023AD, It contains two mempools separately for LACP
packets and other packets. In Tx or Rx, Fast mbuf free will operate
mbuf from different mempool.
This patch will prevent 'RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE' offload
when in bonding mode Broadcast and mode 8023AD.
Fixes: 78aecefed9 ("bond: move param parsing in configure step")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The return value of rte_tel_data_alloc() may be null pointer.
Add missing check vs null.
Fixes: 5ea354a1f2 ("net/cnxk: support telemetry")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Many user (e.g. telemetry) invokes rte_eth_xstats_get(port_id, NULL, 0)
to retrieve the required number of elements, but currently axgbe PMD
returns zero when xstats is null.
Remove the logic of "return zero when xstats is NULL", and add the logic
of "return the required number of entries when n is lower than the
required number of entries".
Fixes: 9d1ef6b2e7 ("net/axgbe: add xstats")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Many user (e.g. telemetry) invokes rte_eth_xstats_get(port_id, NULL, 0)
to retrieve the required number of elements, but currently mvpp2 PMD
returns zero when xstats is null.
Remove the logic of "return zero when xstats is NULL", and add the logic
of "return the required number of entries when n is lower than the
required number of entries".
Fixes: a77b5378cd ("net/mrvl: add extended statistics")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Many user (e.g. telemetry) invokes rte_eth_xstats_get(port_id, NULL, 0)
to retrieve the required number of elements, but currently ipn3ke PMD
returns zero when xstats is null.
Dedicated check for xstats vs null is not required, since ethdev layer
guarantees that it may be null only if number of entries n is 0 (which
is definitely smaller than total xstats count).
Fixes: 5a6d883878 ("net/ipn3ke: implement statistics")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Many user (e.g. telemetry) invokes rte_eth_xstats_get(port_id, NULL, 0)
to retrieve the required number of elements, but currently hns3 PMD
returns zero when xstats is null.
Dedicated check for xstats vs null is not required, since ethdev layer
guarantees that it may be null only if number of entries n is 0 (which
is definitely smaller than total xstats count).
Fixes: 8839c5e202 ("net/hns3: support device stats")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Change ambiguous terms "jump rule" and "group rule" to
clearer "tunnel rule" and "switch rule". The new terms
reflect the purpose of these rules in virtual switches.
The module name, "flow tunnel", is replaced by "FT" in
function names to avoid the use of word "tunnel" twice.
Use term "FT context" when referring to tunnel entries.
Also, add "ctx" suffix to "ft" and "ft_id" occurrences.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Setting a MTU larger than mbuf size is not supported by the device but
not prohibited by the driver. This change adds a restriction to the
driver to prevent setting an MTU that is too large.
While at it define the minimum MTU in the device information to describe
the complete supported MTU range.
Fixes: d4a27a3 ("nfp: add basic features")
Cc: stable@dpdk.org
Signed-off-by: Peng Zhang <peng.zhang@corigine.com>
Signed-off-by: Chaoyong He <chaoyong.he@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund@corigine.com>
Reviewed-by: Walter Heymans <walter.heymans@corigine.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support to read firmware configuration file from
/lib/firmware/cxgb4/ path in the filesystem. The firmware
config file is used to enable or disable NIC features before
firmware initialization to help retrieve better debug data to
analyze firmware init failures. The config file can also
be used to redistribute resources, like queues, TCAMs, etc.,
from disabled physical functions (PFs) to main PF, before
firmware init.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Transport Processor (TP) on the NIC delivers the incoming packets
from the wire to NIC's DMA engine to place the packets in Rx buffers.
TP sends signal towards the Multi-Port Switch (MPS) near the MAC when
the Rxqs run out of Rx buffers posted by driver. These MPS buffer drop
stats are already accounted for in imissed counters. However, if a
large number of Rxqs run out of Rx buffers simultaneously, then the
TP can start dropping packets by itself when there is heavy congestion
on the channel and hence could not inform to the MPS. So, track these
packets dropped by TP in imissed counters. Also add xstats for these
counters.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
- move RSA padding into separate struct.
More padding members should be added into padding,
therefore having separate struct for padding parameters will
make this more readable.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
- Moved DH operation type to DH operation struct.
Operation type (PUBLIC_KEY_GENERATION, SHARED_SECRET) should
be free to choose for any operation. One xform/session should
be enough to perform both DH operations, if op_type would be xform
member, session would have to be created twice for the same
group. Similar problem would be observed in sessionless case.
Additionally, it will help extend DH to support Elliptic Curves.
- Changed order of Diffie-Hellman operation phases.
Now it corresponds with the order of operations.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
