When IOVA is physical address do not prefetch the annotation
of the next frame, as there is a cost involved there to convert
the physical address to virtual address.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Fixed 10G port negotiation issue with another 10G/non 10G port.
When running testpmd with 10G interfaces on 10BaseT interface
on LS2088ARDB, the ports were showing link as down.
This was identified to be caused by the setting of link as down
during config.
Also, the line rate was not being updated in device link params,
thus having the incorrect link speed in status (as 0).
Fixes: c5acbb5ea2 ("net/dpaa2: support link status event")
Cc: stable@dpdk.org
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
In cmd_ddp_get_list_parsed(), elements of "p_list" are accessed
even after the memory allocation for "p_list" fails.
With this patch, this null pointer dereference is avoided as we
return when there is malloc failure.
Fixes: e088907bb8 ("app/testpmd: add command for getting loaded DDP profiles")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
IAVF FDIR needs to check program status from FD completion descriptors
for both successful and failed case, rather than only ask for completion
on error. This patch corrects completion report value so that the called
can determine whether to report completion on error or other cases.
Fixes: 55daca4e45 ("net/ice/base: change function to static")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
bnxt_fw_version_get is not indicating the complete FW version.
Fix it to indicate complete version string.
Fixes: e2652b0a20 ("net/bnxt: support get FW version")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix a buffer overrun issue spotted by coverity while accessing
the array ulp_device_params.
Note that the issue was observed in an internal Coverity scan.
Fixes: 313ac35ac7 ("net/bnxt: support ULP session manager init")
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Clang 6.0.0 will undefine function _mm512_maskz_set1_epi64 on i686
target. Fix it by replacing the function with _mm512_set4_epi64 when
doing 32-bit build.
Warning message during build:
../drivers/net/virtio/virtio_rxtx_packed_avx.c:385:19: warning:
implicit declaration of function '_mm512_maskz_set1_epi64' is invalid
in C99 [-Wimplicit-function-declaration]
Fixes: 77d66da838 ("net/virtio: add vectorized packed ring Rx")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When doing virtio device initialization, virtqueues will be reset in
server mode if ring type is packed. It will cause issue because queues
have been freed in the beginning of device initialization.
Fix this issue by checking whether device has been initialized before
reset. If device hasn't been initialized, there's no need to reset
queues.
Fixes: 6ebbf4109f ("net/virtio-user: fix packed ring server mode")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Specified pattern may be translated in different manner.
For example the pattern "eth / ipv4" can be translated to match
untagged packets only, since the pattern doesn't specify a VLAN item.
It can also be translated to match both tagged and untagged packets,
for the same reason.
This patch updates the rte_flow documentation to clearly specify the
required pattern to use.
For example:
To match tagged ipv4 packets, the pattern "eth / vlan / ipv4 / end"
should be used.
To match untagged ipv4 packets, the pattern "eth / ipv4 / end"
should be used.
To match all IPV4 packets, both tagged and untagged, need to apply
two rules with the patterns above.
To match both tagged and untagged packets of any type, the pattern
"eth / end" should be used.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Ori Kam <orika@mellanox.com>
One new cmdline option `--rx-mq-mode` is added in order to have the
possibility to check whether PMD handle the mq mode correctly or not.
The reason is some NICs need to do different settings based on different
RX mq mode, i.e RSS or not.
With this support in testpmd, the above scenario can be tested easily.
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The current formulas to calculate the TQM slow path and fast path ring
context memory sizes are not quite correct. TQM slow path entry is
array index 0 of ctx->tqm_mem[]. The other array entries are for fast
path. Fix these sizes according to firmware spec. for 57500 and newer
chips.
Fixes: cc5e26b8ef ("net/bnxt: increase TQM entry allocation")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Newer firmware advertises the number of TQM rings to allocate
context memory for. Use the firmware specified value and fall back
to the old value derived from "bp->max_q" if it is not available.
Fixes: f8168ca0e6 ("net/bnxt: support thor controller")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
There is no way to report back a link speed of 200Gbps.
Adding 200G link speed.
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In recent Linux kernels, there is support for extended acknowledgment
to netlink messages. This is quite useful for diagnosing errors
in configuration in the kernel with TAP.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Keith Wiles <keith.wiles@intel.com>
The tap_nl_recv() function does not need to use the full
complex recvmsg() system call, basic recv() will work here.
Ditto for tap_nl_send() full sendmsg is not needed.
Add logic to retry in case EINTR rather than forcing
error handling back in driver or worse to ethdev API.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Keith Wiles <keith.wiles@intel.com>
The TAP driver does not initialize all the elements of the rte_flow
structure. This can lead to crash in rte_flow_destroy.
(gdb) where
flow=0x100e99280, error=0x0)
at drivers/net/tap/tap_flow.c:1514
(gdb) p remote_flow
$1 = (struct rte_flow *) 0x6b6b6b6b6b6b6b6b
Which is here:
static int
tap_flow_destroy_pmd(struct pmd_internals *pmd,
struct rte_flow *flow,
struct rte_flow_error *error)
{
struct rte_flow *remote_flow = flow->remote_flow;
...
if (remote_flow) {
remote_flow->msg.nh.nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK;
Simplest fix is to use rte_zmalloc() so remote_flow and other fields
are always set at zero.
Fixes: 2bc06869cd ("net/tap: add remote netdevice traffic capture")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The number of queues in queue group should be checked before
using it. This patch fixed the issue.
Fixes: 47d460d632 ("net/ice: rework switch filter")
Cc: stable@dpdk.org
Signed-off-by: Junyu Jiang <junyux.jiang@intel.com>
Tested-by: Qimai Xiao <qimaix.xiao@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch fixes issue that doesn't support mark only case.
Mark only action is equal to mark + passthru action.
Fixes: f5cafa961f ("net/ice: add flow director create and destroy")
Cc: stable@dpdk.org
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
DPDK does not implement interrupt mechanism on BSD,
so force NIC status synchronization.
Fixes: dc66e5fd01 ("net/ixgbe: improve link state check on VF")
Cc: stable@dpdk.org
Signed-off-by: Zhihong Peng <zhihongx.peng@intel.com>
Tested-by: Zhimin Huang <zhiminx.huang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
When we download a switch rule for ipv6 with esp payload
"eth / ipv6 / esp spi is 1 / end actions queue index 2 / end"
if we don't add bm bit set check for tun_type, then a packet of
ipv4 with esp payload
"sendp([Ether(dst="00:00:00:00:01:00")/IP(proto=50)/ESP(spi=1)/
("X"*480)], iface="ens5f0", count=10)"
Will also go to queue index 2. And also, we need to do tun_type
check, or the second rule of following can not be download because
of rejection from switch rule download function ice_aq_sw_rules().
"eth / ipv4 / esp spi is 1 / end actions queue index 5 / end"
"eth / ipv6 / esp spi is 1 / end actions queue index 2 / end"
Fixes: 4f11962fce ("net/ice/base: support AH ESP and NAT-T on switch")
Fixes: 99d8ba79ef ("net/ice/base: force switch to use different recipe")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Qi Fu <qi.fu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If the PF driver does not support the new speed reporting capabilities
then use link_event instead of link_event_adv to get the speed.
Fixes: 48de41ca11 ("net/avf: enable link status update")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
We see a stack smashing as a result of defensive code missing. Once the
nb_pkts is less than RTE_BNXT_DESCS_PER_LOOP, it will be modified to
zero after doing a floor align, and we can not exit the following
receiving packets loop. And the buffers will be overwrite, then the
stack frame was ruined.
Fix the problem by adding defensive code, once the nb_pkts is zero, just
directly return with no packets.
Fixes: bc4a000f2f ("net/bnxt: implement SSE vector mode")
Cc: stable@dpdk.org
Signed-off-by: Linsi Yuan <yuanlinsi01@baidu.com>
Signed-off-by: Dongsheng Rong <rongdongsheng@baidu.com>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This fixes the problem where driver would not start if only
have a single Rx queue and multiple Txq. In that case, RSS
should stay disabled.
Fixes: 92d23a57ca ("net/netvsc: support configuring RSS parameters")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
If number of tx queues is greater than the number of rx queues;
the driver ends up allocating more channels than rx queues.
The problem is that the RSS indirection table is programmed such
that some packets will end up on a channel that would never be
polled. The fix is to limit the RSS indirection table by number
of rx queues not channels.
Fixes: 92d23a57ca ("net/netvsc: support configuring RSS parameters")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
With multiple channels, the primary channel may receive notification
that VF has been added or removed while secondary channel is in
process of doing receive or transmit. Resolve this race by converting
existing vf_lock to a reader/writer lock.
Users of lock (tx/rx/stats) acquire for read, and actions like
add/remove acquire it for write.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Since VF notifications are handled as VMBUS notifications on the
primary channel (and not as hotplug). The channel should be checked
before deciding to use VF for Rx or Tx.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The check for event ring being empty needs a barrier
to avoid any over aggressive optimization.
This is same barrier as Linux kernel.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, when running start/clear stats&xstats/stop command many times
based on testpmd application, there are incorrect forward Rx/Tx-packets
stats as below:
---------------------- Forward statistics for port 0 --------------
RX-packets: 18446744073709544808 RX-dropped: 0 <snip>
TX-packets: 18446744073709536616 TX-dropped: 0 <snip>
--------------------------------------------------------------------
The root cause as below:
1. The struct rte_port of testpmd.h has a member variable "struct
rte_eth_stats stats" to store the last port statistics.
2. When running start command, it execute cmd_start_parsed ->
start_packet_forwarding -> fwd_stats_reset, which call
rte_eth_stats_get API function to save current port statistics.
3. When running stop command, it execute fwd_stats_display, which call
rte_eth_stats_get to get current port statistics, and then minus last
port statistics.
4. If we run clear stats or xstats after start command, then run stop,
it may display above incorrect stats because the current
Rx/Tx-packets is lower than the last saved RX/TX-packets(uint64_t
overflow).
This patch fixes it by clearing last port statistics when executing
"clear stats/xstats" command.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, there is no way to check the aging event or to get the
current aged flows in testpmd, this patch include those implements, it's
included:
- Add new item "flow_aged" to the current print event command arguments.
- Add new command to list all aged flows, meanwhile, we can set
parameter to destroy it.
Signed-off-by: Dong Zhou <dongz@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some PMD do not respect the eth_dev API when allocating their
rte_eth_dev. As a result, on device add event resulting from
rte_eth_dev_probing_finish() call, the eth_dev processed is incomplete.
The segfault is a good way to focus the developer on the issue, but does
not inspire confidence. Instead, warn the user of the error repeatedly.
The failsafe PMD can warn of the issue and continue. It will repeatedly
attempt to initialize the failed port and complain about it, which
should result in the same developer focus but with less crashing.
Signed-off-by: Gaetan Rivet <grive@u256.net>
Zero is a valid fd. The fd won't be closed thus leading fd leak,
when it is zero.
Also the service proxy is initialized at 0. This is assuming that all of
its fields are invalid at 0. The issue is that a file descriptor at 0 is
a valid one.
The value -1 is used as sentinel during cleanup. Initialize the RX proxy
file descriptor to -1.
Fixes: f234e5bd99 ("net/failsafe: register slaves Rx interrupts")
Fixes: 9e0360aebf ("net/failsafe: register as Rx interrupt mode")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: Gaetan Rivet <grive@u256.net>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
This patch adds versioned function rte_cryptodev_info_get()
to prevent some issues with ABI policy.
Node v21 works in same way as before, returning driver capabilities
directly to the API caller. These capabilities may include new elements
not part of the v20 ABI.
Node v20 function maintains compatibility with v20 ABI releases
by stripping out elements not supported in v20 ABI. Because
rte_cryptodev_info_get is called by other API functions,
rte_cryptodev_sym_capability_get function is versioned the same way.
Fixes: b922dbd38c ("cryptodev: add ChaCha20-Poly1305 AEAD algorithm")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Explicitly check return value in add_specific()
CID 357760 (#2 of 2): Negative array index write (NEGATIVE_RETURNS)
8. negative_returns: Using variable ret as an index to array sad->cnt_arr
Coverity issue: 357760
Fixes: b2ee269267 ("ipsec: add SAD add/delete/lookup implementation")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Get rid of hardcoded limit of cryptodev sessions.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds missing line about addition of AES-GCM/GMAC J0
capability to 20.05 release notes.
Fixes: 2165e2e9ea ("crypto/qat: support AES-GCM J0")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Updated SNOW3G and KASUMI PMD documentation guides
with information about the latest Intel IPSec Multi-buffer
library supported.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The latest version of the Intel IPSec Multi-buffer library
adds an API to authenticate multiple buffers in parallel.
The PMD is modified to use this API, improving
performance of the ZUC-EIA3 algorithm.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
dev info is set but not used in
test_queue_pair_descriptor_setup().
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
In test_queue_pair_descriptor_setup() and
test_device_configure_invalid_queue_pair_ids a QAT specific
check is there, however the test case can be run on any PMD.
Hence removed the unnecessary check.
test_queue_pair_descriptor_setup and
test_device_configure_invalid_queue_pair_ids execution
need to be altered as the valid device values should be
configured in the end so that all other tests can be
executed.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
dpaa_sec and dpaa2_sec PMDs can run generic
cryptodev_testsuite. Hence removing the specific
test suites.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
cryptodevs which support rte_security PDCP protocol,
can run all PDCP cases if it sets a feature flag
RTE_CRYPTODEV_FF_SECURITY. Previously, only dpaa2_sec
and dpaa_sec test suites were running these tests.
Now it is moved to generic test suite with a check
on the feature flag and the case will be skipped if it
is not supported by the PMD.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
The session init routine rte_cryptodev_sym_session_init(),
could return -ENOTSUP when the requested algo combination
is not supported by the PMD. This should be treated as
unsupported feature.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
