Flow director rules matching traffic properties above layer 2 do not
target a fixed hash Rx queue (HASH_RXQ_ETH), it actually depends on the
highest protocol layer specified by each flow rule.
mlx5_fdir_filter_delete() makes this wrong assumption and causes a crash
when attempting to destroy flow rules with L3/L4 specifications.
Fixes: 4c3e9bcdd52e ("net/mlx5: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Add rte_flow_action_count action data structure to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain. Also this enables
multiple count actions to be specified in a single flow action.
This patch also modifies the existing rte_flow_query API to take the
rte_flow_action structure as an input parameter instead of the
rte_flow_action_type enumeration to allow querying a specific action
from a flow rule when multiple actions of the same type are specified.
This patch also contains updates for the bonding, failsafe and mlx5 PMDs
and testpmd application which are affected by this API change.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Tunnel w/o tunnel id pattern could match any non-tunneled packet,
this patch allowed tunnel w/o tunnel id pattern after proper outer spec.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Dump verb flow detail including flow spec type and size for debugging
purpose.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Tunnel RSS level of flow RSS action offers user a choice to do RSS hash
calculation on inner or outer RSS fields. Testpmd flow command examples:
GRE flow inner RSS:
flow create 0 ingress pattern eth / ipv4 proto is 47 / gre / end
actions rss queues 1 2 end level 1 / end
GRE tunnel flow outer RSS:
flow create 0 ingress pattern eth / ipv4 proto is 47 / gre / end
actions rss queues 1 2 end level 0 / end
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch split out flow RSS hash field handling logic to dedicate
function.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch introduced tunnel type identification based on flow rules.
If flows of multiple tunnel types built on same queue, no tunnel type
will be returned. User application could use bits in flow mark as tunnel
type identifier.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch support L3 VXLAN, no inner L2 header comparing to standard
VXLAN protocol. L3 VXLAN using specific overlay UDP destination port to
discriminate against standard VXLAN, device parameter and FW has to be
configured to support it:
sudo mlxconfig -d <device> -y s IP_OVER_VXLAN_EN=1
sudo mlxconfig -d <device> -y s IP_OVER_VXLAN_PORT=<port>
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch supports new 16 Verbs flow priorities by trying to create a
simple flow of priority 15. If 16 priorities not available, fallback to
traditional 8 priorities.
Verb priority mapping:
8 priorities >=16 priorities
Control flow: 4-7 8-15
User normal flow: 1-3 4-7
User tunnel flow: 0-2 0-3
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0a8 ("ethdev: introduce generic flow API")
Fixes: 99e7003831c3 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182a5 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182a5 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch replaces C99-style flexible arrays in struct rte_flow_action_rss
and struct rte_flow_item_raw with standard pointers to the same data.
They proved difficult to use in the field (e.g. no possibility of static
initialization) and unsuitable for C++ applications.
Affected PMDs and examples are updated accordingly.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Fixes: b1a4b4cbc0a8 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch makes the following changes to flow rule actions:
- List order now matters, they are redefined as performed first to last
instead of "all simultaneously".
- Repeated actions are now supported (e.g. specifying QUEUE multiple times
now duplicates traffic among them). Previously only the last action of
any given kind was taken into account.
- No more distinction between terminating/non-terminating/meta actions.
Flow rules themselves are now defined as always terminating unless a
PASSTHRU action is specified.
These changes alter the behavior of flow rules in corner cases in order to
prepare the flow API for actions that modify traffic contents or properties
(e.g. encapsulation, compression) and for which order matter when combined.
Previously one would have to do so through multiple flow rules by combining
PASSTRHU with priority levels, however this proved overly complex to
implement at the PMD level, hence this simpler approach.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
PMDs with rte_flow support are modified accordingly:
- bnxt: no change, implementation already forbids multiple actions and does
not support PASSTHRU.
- e1000: no change, same as bnxt.
- enic: modified to forbid redundant actions, no support for default drop.
- failsafe: no change needed.
- i40e: no change, implementation already forbids multiple actions.
- ixgbe: same as i40e.
- mlx4: modified to forbid multiple fate-deciding actions and drop when
unspecified.
- mlx5: same as mlx4, with other redundant actions also forbidden.
- sfc: same as mlx4.
- tap: implementation already complies with the new behavior except for
the default pass-through modified as a default drop.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
During the transition to resurrect flow director on top of rte_flow, mask
handling was removed by mistake.
Fixes: 4c3e9bcdd52e ("net/mlx5: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This will help to bring back the mask handler which was removed when this
feature was rewritten on top of rte_flow.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The number of queues provided by the application is not checked against
parser's supported maximum.
Fixes: 3d821d6fea40 ("net/mlx5: support RSS action flow rule")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In some environments it is desirable to have the NIC perform RSS
normally on the packet regardless of the number of queues configured.
The RSS hash result that is stored in the mbuf can then be used by
the application to make decisions about how to distribute workloads
to threads, secondary processes, or even virtual machines if the
application is a virtual switch. This change to the mlx5 driver
aligns with how other drivers in the Intel family work.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Tested-by: Allain Legacy <allain.legacy@windriver.com>
Verbs specification doesn't help to distinguish between packets having an
VLAN and those which do not have, this ends by having flow rule which does
not react as the user expects e.g.
flow create 0 ingress pattern eth / vlan / end action queue index 0 / end
flow create 0 ingress pattern eth / end action queue index 1 / end
are colliding in Verbs definition as in both rule are matching packets with
or without VLAN.
For this reason, the VLAN specification must not be empty, otherwise the
PMD has to refuse it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Fill the error context in conversion function to provide a better reason on
why it cannot be done to the user.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Packet matching inner and outer flow rules are caught by the first one
added in the device as both flows are configured with the same priority.
To avoid such situation, the inner flow can have an higher priority than
the outer ones as their pattern matching will otherwise collide.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This change removes the need to distinguish unlocked priv_*() functions
which are therefore renamed using a mlx5_*() prefix for consistency.
At the same time, all functions from mlx5 uses a pointer to the ETH device
instead of the one to the PMD private data.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
In priv struct only the memory region needs to be protected against
concurrent access between the control plane and the data plane.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Replaces all (void)foo; by __rte_unused macro except when variables are
under #if statements.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Adding a pattern targeting a single queues wrongly behaves as it is an RSS
request, ending by creating several Verbs flows rules to match the RSS
configuration.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This is to revert the following commits:
commit da646bd93888 ("net/mlx5: fix all multi verification code position")
commit 0a40a1363a4d ("net/mlx5: fix flow type for allmulti rules")
The last one introduced a bug in the following diff:
@ -1262,6 +1274,7 @@ struct ibv_spec_header {
eth.val.ether_type &= eth.mask.ether_type;
}
mlx5_flow_create_copy(parser, ð, eth_size);
+ parser->allmulti = eth.val.dst_mac[0] & 1;
return 0;
}
As broadcast rules will be considered of type allmulti as well.
The patch was originally intended to enable VF to receive all multicast
traffic by using the IBV_FLOW_ATTR_MC_DEFAULT flow type.
Since the support was removed from the kernel there is no point with
fixing this issue, hence the revert.
Fixes: da646bd93888 ("net/mlx5: fix all multi verification code position")
Fixes: 0a40a1363a4d ("net/mlx5: fix flow type for allmulti rules")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Neither upstream kernel nor MLNX_OFED support such filter.
There is no point announcing this feature.
Reverts commit 0fb2c9842b20 ("net/mlx5: support IPv4 time-to-live filter")
Fixes: 0fb2c9842b20 ("net/mlx5: support IPv4 time-to-live filter")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
An RSS configuration without a key is valid according to the
rte_eth_rss_conf API definition.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Reported-by: Yuanhan Liu <yliu@fridaylinux.org>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
A single queue should have the same verbs priority as an RSS one.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
priv_flow_stop() may be called several times, in such situation flows are
already removed from the NIC and thus all associated objects are no present
in the flow object (ibv_flow, indirection tables, ....).
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This lays the groundwork for externalizing rdma-core as an optional
run-time dependency instead of a mandatory one.
No functional change.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Two masks were compared instead of verifying the spec was included in the
supported mask.
Fixes: 2097d0d1e2cc ("net/mlx5: support basic flow items and actions")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Flow director must provide the same spec and mask to be sure to be
validated.
Fixes: 4c3e9bcdd52e ("net/mlx5: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
All multi code should not be handled in exit part of the code but in the
mainline of the function.
Fixes: 0a40a1363a4d ("net/mlx5: fix flow type for allmulti rules")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Create a rte_ethdev_driver.h file and move PMD specific APIs here.
Drivers updated to include this new header file.
There is no update in header content and since ethdev.h included by
ethdev_driver.h, nothing changed from driver point of view, only
logically grouping of APIs. From applications point of view they can't
access to driver specific APIs anymore and they shouldn't.
More PMD specific data structures still remain in ethdev.h because of
inline functions in header use them. Those will be handled separately.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
There are parameters that are not copy from
spec to verbs structure in the vtc_label
Fixes: 43e9d9794cde ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Shachar Beiser <shacharbe@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Adding the size of ibv_flow_spec_action_drop is missing. This can cause
overflow when converting rte_flow to ibv_flow and thus corrupt memory.
Fixes: 8086cf08b2f0 ("net/mlx5: handle RSS hash configuration in RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
