rte_pktmbuf_prefree_seg() can return NULL if the mbuf still
has remaining references on it.
Adding a NULL check to prevent segfault.
Fixes: bc4a000f2f ("net/bnxt: implement SSE vector mode")
Fixes: 3983583414 ("net/bnxt: support NEON")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
During port start if bnxt_alloc_all_hwrm_stat_ctxs() fails,
in the cleanup path we do see errors like below:
bnxt_hwrm_ring_free(): hwrm_ring_free cp failed. rc:2
bnxt_hwrm_ring_free(): hwrm_ring_free rx failed. rc:2
The reason for this is in bnxt_free_all_hwrm_rings(), the check
is made against "ring->fw_ring_id != INVALID_HW_RING_ID" which
always return true as ring->fw_ring_id is not set to INVALID_HW_RING_ID
while initialising the ring structs.
Fixes: 6eb3cc2294 ("net/bnxt: add initial Tx code")
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The maximum number of TCP segments that can be aggregated & the
maximum number of aggregations the VNIC supports are configured
incorrectly during LRO configuration.
This patch fixes these values.
Fixes: b150a7e7ee ("net/bnxt: support LRO on Thor adapters")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use "req.tunnel_dst_port_val" in bnxt_hwrm_tunnel_dst_port_alloc()
as big endian since hwrm spec mandates this field in network byte order.
Also, fixed the endianness while parsing the command output.
Fixes: 10d074b202 ("net/bnxt: support tunneling")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fix VF representor port add when it's endpoint interface is down.
While adding vf representor port to a bridge, vnic & svif information of
vf representors endpoint(VF) would be needed to program default flow
rules.
However, if the endpoint interface is down when vf representor port is
added, firmware will return invalid vnic & svif information.
This patch fixes the problem by registering to DEFAULT_VNIC_CHANGE
async event and once the async event is received, use the endpoint
information(VF's fid) to fetch it's vnic & svif information and
program the default flow rules.
Fixes: 322bd6e702 ("net/bnxt: add port representor infrastructure")
Cc: stable@dpdk.org
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Set ulp_ctx explicitly to NULL in ulp_ctx_deinit() so that representor
init is aborted if parent ulp context is not initialized.
Also check for the same before creation of port default rules.
Additional checks added in VF rep dev ops for proper parent dev
initialization, to avoid null pointer dereference.
Fixes: 322bd6e702 ("net/bnxt: add port representor infrastructure")
Fixes: 313ac35ac7 ("net/bnxt: support ULP session manager init")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The lookup default action record parif table is updated to catch
the miss path for the entries in the exact match table.
PARIF is handler to a partition of the physical port. The lookup
parif table contains entries for each incoming interface the default
action for the miss entries that do not match the configured rules in
the exact match table. This fix configures those entries in that table.
Fixes: fe82f3e027 ("net/bnxt: support exact match templates")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Configure loopback parif for full offload egress flows.
PARIF is handler to a partition of the physical port.
The full offload egress flows for the VF rep interface must
use loopback parif to offload missed flows. The miss
flow path for the VF rep interface has to be loopback interface
parif entry and for the non-VF rep interface it has to be the
interface's parif entry.
Fixes: fe82f3e027 ("net/bnxt: support exact match templates")
Cc: stable@dpdk.org
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_validate_and_parse_flow_type
vxlan_spec cannot be NULL since its already being accessed
before. Remove the redundant NULL check.
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The function rte_malloc() could return NULL, the return
value need to be checked.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When freeing a vf_info, we should free the 'vlan_as_table'
and 'vlan_table' for the vf_info.
Fixes: b7778e8a1c ("net/bnxt: refactor to properly allocate resources for PF/VF")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
OVS-DPDK seems to set the reset bit for every flow query. Honor
the bit by resetting the SW counter values after assigning them.
Also set the 'hit' bit only if the counter value retrieved by HW
is non-zero.
While querying flow stats, use max possible entries in the fc table scan
for valid entries instead of active entries as the active entry can be in
any slot in the table.
This is a critical fix for OVS-DPDK flow aging.
Fixes: 306c2d28e2 ("net/bnxt: support count action in flow query")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Adjusted resource allocations for the hardware resources
like TCAM entries, action records, stat counters, exact match records to
scale up offload flows.
Also increased IPv4 nat entries to 1023.
This patch is a critical fix to enable driver load on current and all
FW versions going forward.
Fixes: cef3749d50 ("net/bnxt: update TruFlow resource allocation numbers")
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Remove the memory management scheme for Extended Exact Match
using system memory. Using host memory scheme instead which
was the default anyway.
Fixes: b2da02480c ("net/bnxt: support EEM system memory")
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
When we compile PMD with CFLAGS set to -O -g, build fails because of
uninitialized error. This patch fixes it.
Bugzilla ID: 509
Fixes: 1e46b39626 ("net/bnxt: fill cfa action in Tx descriptor")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
The if condition in bnxt_restore_mac_filters needs to check for
the result of logical AND. But it was not doing it resulting in
an incorrect check.
Fixes: b02f1573cd ("net/bnxt: restore MAC filters during reset recovery")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
No need to access rx_cfa_code, cfa_code_map from the VF-Rep functions
anymore.
Fixes: 322bd6e702 ("net/bnxt: add port representor infrastructure")
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Turn on shadow memory in the core to allow search before allocate.
This allows reuse of constrained resources.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Search before alloc allows reuse of constrained resources such as tcam,
encap, and source modifications. The new templates will search the
entry and alloc only if necessary.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for tcam table processing to enable the search
and allocate support. This also includes the tcam entry update
support.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Truflow stack adds VFR to VF and VF to VFR conduits when VF
representor is created. However, in the ingress direction the
VF's fw rules conflict with Truflow rules, resulting in not hitting
the Truflow VFR rules. To fix this, fw is going to remove it’s
VF rules when vf representor is created in Truflow mode and will
restore the removed rules when vf representor is destroyed.
This patch invokes the vf representor alloc and free hwrm commands
as part of which fw will do the above mentioned actions.
Fixes: 1e18ec58ed ("net/bnxt: create default flow rules for port reprentor")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Currently, the flow_ids of port_to_app/app_to_port & tx_cfa_action
for the first port are getting over-written by the second port because
these fields are stored in the ulp context which is common across the
ports.
This patch fixes the problem by having per port structure to store these
fields.
Fixes: 9f702636d7 ("net/bnxt: add port default rules for ingress and egress")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Modified ulp mapper to use the new tf_search_tbl_entry API.
When search before allocation is requested, mapper calls
tc_search_tbl_entry with the alloc flag.
- On HIT, the result and table index is returned.
- On MISS, the table index is returned but the result is
created and the table entry is set.
- On REJECT, the flow request is rejected.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Added Index Table shadow tables for searching
- Added Search API to allow reuse of Table entries
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Removed the hash calculation from tf_shadow_tcam in favor of using a
new common implementation.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added egress template with VLAN tag match
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Shahaji Bhosle <sbhosle@broadcom.com>
This is a work around for the OVS setting offload rules that
are passing vlan priority mask as wild card and currently we
do not support it.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
The parif for the egress rules need to be dynamically
configured based on the port type.
PARIF is handler to a partition of the physical port.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
The template is updated to support additional combinations
of NAT actions.
Fixes: 2951f7f311 ("net/bnxt: support NAT action items")
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When a packet is looped back from VF to VFR, it is marked to identify
the VFR interface. However, this mark_id shouldn't be percolated up to
the OVS as it is internal to pmd.
This patch fixes it by skipping mark injection into mbuf if the packet
is received on VFR interface.
Fixes: 6dc83230b4 ("net/bnxt: support port representor data path")
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Added TruFlow hash API for common hash uses across TruFlow
core functions.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Modified ulp mapper to use the new tf_search_tcam_entry API.
When search before allocation is requested, mapper calls
tc_search_tcam_entry with the alloc flag.
- On HIT, the result and tcam index is returned.
- On MISS, the tcam index is returned but the result is
created and the tcam entry is set.
- On REJECT, the flow request is rejected.
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
PARIF is handler to a partition of the physical port.
For the offload miss rules, the parif miss path needs to be
considered. The higher parif are reserved for handling this.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support to enable or disable the NAT global registers.
The NAT feature is enabled in hardware during initialization
and disabled at deinitialization of the application.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
- Add TCAM shadow tables for searching
- Add Search API to allow reuse of TCAM entries
Signed-off-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Added support for exact match templates
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
The default egress rule should include buffer descriptor action
record only if the VF representor is enabled.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The protocol header are implicitly matched based on the proto
field data. For instance, if ether type is set as 0x800 in the
ether header then ipv4 protocol header is assumed to be present
for template matching even if ipv4 header is not present in the
given flow pattern.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
OVS-DPDK is accumulating the flow counters that are returned as part of
the flow_query API and it is being issued at least 3 times every second.
So there is no need to accumulate the counts internally in the driver.
Fixes: 306c2d28e2 ("net/bnxt: support count action in flow query")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Removed the check to enable default flows only when VF representor
are enabled. It should be enabled all the time in truflow mode.
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Mike Baucom <michael.baucom@broadcom.com>
Initialize table scope resource manager parameter.
Clear out rm_is_allocated parms before calling as base_index was added
and used incorrectly in this instance.
Signed-off-by: Farah Smith <farah.smith@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add support for new resource manager to manage CFA resources.
TCAM is split into high and low regions now and CFA resource types
are being updated accordingly.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
