This patch adds dynamic SGL allocation instead of static one.
The number of element in SGL can be adjusted in each operation
depend of the request.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch adds Poll Mode Driver for asymmetric crypto
functions of Intel QuickAssist Technology hardware.
It contains plain driver with no functions implemented, specific
algorithms will be introduced in separate patches.
This patch depends on a QAT PF driver for device initialization. See
the file docs/guides/cryptodevs/qat.rst for configuration details.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Added initial stub source files and required meson changes
for Windows support.
kernel/windows/meson is a stub file added to support
Windows specific source in future releases.
Signed-off-by: Pallavi Kadam <pallavi.kadam@intel.com>
Signed-off-by: Anand Rawat <anand.rawat@intel.com>
Reviewed-by: Jeff Shaw <jeffrey.b.shaw@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Harini Ramakrishnan <harini.ramakrishnan@microsoft.com>
Since we have the version number in a separate file at the root level,
we should not need to duplicate this in rte_version.h too. Best
approach here is to move the macros for specifying the year/month/etc.
parts from the version header file to the build config file - leaving
the other utility macros for e.g. printing the version string, where they
are.
For "make", this is done by having a little bit of awk parse the version
file and pass the results through to the preprocessor for the config
generation stage.
For "meson", this is done by parsing the version and adding it to the
standard dpdk_conf object.
In both cases, we need to append a large number - in this case "99",
previously 16 in original code - to the version number when we want to do
version number comparisons. Without this, the release version e.g. 19.05.0
will compare as less than it's RC's e.g. 19.05.0-rc4. With it, the
comparison is correct as "19.05.0.99 > 19.05.0-rc4.99".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
To keep the top-level meson.build file as clean and clear as possible, we
move the version handling to the config/meson.build file, where the rest of
the build configuration is already being set up.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Remove the following warning by comparing string to string.
config/arm/meson.build:153: WARNING: Trying to compare values of
different types (list, str) using ==.
Fixes: c6e536e384 ("build: add more implementers IDs and PNs for ARM")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the cross files for meson compilation from having linuxapp
in the name to just linux in the name.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is the main patch which renames the macros, functions,
structs and any remaining strings in the iavf code.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable native/cross compiling for Cortex-A55 and Cortex-A76 on meson.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
pcap has historically shipped a custom pcap-config binary tool which
does the job of pkg-config. It was never compatible with cross
compilation.
Meson uses it when using dependency(), which then means cross
compilation fails.
Set pcap-config to empty in the meson cross compilation files so
that Meson will not use it, and add a fallback in case
dependency() fails.
libpcap 1.9.0 finally ships a pkg-config file so everything will
work out of the box in the future.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
Use dependency() instead of manual append to ldflags.
Move libbsd inclusion to librte_eal, so that all other libraries and
PMDs will inherit it.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Allow users and packagers to override the default RTE_MAX_ETHPORTS.
This adds a new meson option, max_ethports which defaults to the
current value.
Signed-off-by: Chas Williams <3chas3@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Rather than relying on the target machine architecture, use the
size of a pointer from the compiler to determine if we are 64-bits
or not. This allows correct behaviour when you pass -m32 as a compile
option. It also allows us to use this value repeatedly throughout the
repo rather than continually testing for the sizeof(void*).
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Acked-by: Luca Boccassi <bluca@debian.org>
This commit reworks the checks for binutils 2.30 and how
the flags to disable AVX512F are passed to the compiler.
Previously the #define for including AVX512 code was set,
while the -mno-avx512f argument was given to the compiler.
This would cause gcc to correctly refuse to emit AVX512
instructions, but the rte_memcpy code that includes AVX512
optimizations was being added to the build.
The check for binutils check is now moved to x86 as it is
irrelevant for other architectures, and the -mno-avx512f
flag is passed to a march_opts array in meson. As the
-mno-avx512 flag is added earlier in the build, the code
in rte_memcpy is no longer attempted to be compiled.
This commit also adds a message print in the meson configure
stage to alert the user of the workaround being employed.
Fixes: a32ca9a4eb ("mk: fix scope of disabling AVX512F support")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
The libraries provided by rdma-core may be statically linked
if enabling CONFIG_RTE_IBVERBS_LINK_STATIC in the make-based build.
If CONFIG_RTE_BUILD_SHARED_LIB is disabled, the applications
will embed the mlx PMDs with ibverbs and the mlx libraries.
If CONFIG_RTE_BUILD_SHARED_LIB is enabled,
the mlx PMDs will embed ibverbs and the mlx libraries.
Support with meson may be added later.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rename options CONFIG_RTE_LIBRTE_MLX4_DLOPEN_DEPS and
CONFIG_RTE_LIBRTE_MLX5_DLOPEN_DEPS to a single option
CONFIG_RTE_IBVERBS_LINK_DLOPEN.
Rename meson option enable_driver_mlx_glue to ibverbs_link.
There was no good reason for setting a different link option
for mlx4 and mlx5. Having a single common option makes it
easier to understand and unify make and meson systems.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
AVX512 was disabled for GCC because of Bugzilla issue 97 [1],
the GCC defect submitted for the issue [2] highlighted that this is
a known binutils version 2.30 issue.
Narrowed the scope of no-avx512 to the this specific binutils version.
[1]
https://bugs.dpdk.org/show_bug.cgi?id=97
[2]
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=88096
Fixes: 8d07c82b23 ("mk: disable gcc AVX512F support")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Introduce librte_ipsec library.
The library is supposed to utilize existing DPDK crypto-dev and
security API to provide application with transparent IPsec processing API.
That initial commit provides some base API to manage
IPsec Security Association (SA) object.
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit includes the add of:
- ConnectX-6 device ID
- ConnectX-6 SRIOV device ID
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Normally when starting/stopping the device the queue
should be started and stopped. Support them both in
this patch.
Below ops are added,
dev_configure
dev_start
dev_stop
dev_close
dev_reset
rx_queue_start
rx_queue_stop
tx_queue_start
tx_queue_stop
rx_queue_setup
rx_queue_release
tx_queue_setup
tx_queue_release
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Added parser part into compression perf. test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Offload cost test was improved in order to collect
more accurate results.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
This patch makes the configuration based on makefile and the
configuration based on meson to be the same.
Fixes: c6e536e384 ("build: add more implementers IDs and PNs for ARM")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When running dpdk applications on cores whose ids are bigger
than original max_core setting, eal error as below:
EAL: Detected 104 lcore(s)
EAL: Detected 2 NUMA nodes
EAL: invalid core list
-l CORELIST core indexes between 0 and 128
The fix is to increase max_core to 256 on arm64 platform.
Fixes: b3ce00e5 ("mk: introduce ARMv8 architecture")
Cc: stable@dpdk.org
Signed-off-by: Joyce Kong <joyce.kong@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add the machine definition 'default' which is special compared
to 'native' (most optimized for current system) or any explicit
type (external entity has to decide on the type).
It defaults to the per arch agreed common minimal baseline
needed for DPDK to reasonable work.
That might not be the most optimized, but the most portable
version while still being able to support the CPU features
required for DPDK.
Going forward this can be bumped up by the DPDK project, but it
can never be an invariant like 'native'.
Distributions and other needing portable code are expected to
define the machine as 'default'.
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
So far only if machine was "native" it did use the re-direction to
not set -march on ppc64 (where -march is not supported).
We have to use mcpu/mtune in any case on ppc for whatever someone using
the build system defines as machine.
Fixes: 54d609a138 ("build: add ppc64 meson build")
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Building on armv7a with meson currenctly fails:
/usr/lib/gcc/arm-linux-gnueabihf/8/include/arm_neon.h:10369:1: error:
inlining failed in call to always_inline ‘vld1q_s32’: target
specific option mismatch
Set -mfpu=neon on that architecture like the legacy makefiles do to fix
the issue.
Fixes: b1d48c4118 ("build: support ARM with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
FreeBSD compilation was failing through meson build.
RTE_EAL_VFIO is not supported in FreeBSD.
But RTE_EAL_VFIO was enabled for both linux and freebsd.
So RTE_EAL_VFIO is removed from config/rte_config.h and
based on the platform RTE_EAL_VFIO flag is enabled/disabled appropriately.
Fixes: 844514c735 ("eal: build with meson")
Cc: stable@dpdk.org
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds telemetry as a dependecy to all applications. Without these
changes, the --telemetry flag will not be recognised and applications will
fail to run if they want to enable telemetry.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds the infrastructure and initial code for the telemetry
library.
The telemetry init is registered with eal_init(). We can then check to see
if --telemetry was passed as an eal option. If --telemetry was parsed, then
we call telemetry init at the end of eal init.
Control threads are used to get CPU cycles for telemetry, which are
configured in this patch also.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Brian Archbold <brian.archbold@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Keep only single config option RTE_USE_C11_MEM_MODEL for C11 memory
model, so all modules can leverage C11 atomic extension by enable this
option.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Postcopy live-migration features relies on userfaultfd,
which was only introduced in kernel v4.3.
This patch introduces a new define to allow building vhost
library on kernels not supporting userfaultfd.
With legacy build system, user has to explicitly set
CONFIG_RTE_LIBRTE_VHOST_POSTCOPY to 'y'.
With Meson build system, RTE_LIBRTE_VHOST_POSTCOPY gets
automatically defined if userfaultfd kernel header is
present.
Suggested-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Makefile/meson build infrastructure, atl_ethdev minimal skeleton,
header with aquantia aQtion NIC device and vendor IDs.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
The caam_jr poll mode crypto driver is supported for
NXP SEC 4.x+ (CAAM) hardware accelerator.
This driver is by default supported on LE platforms,
if it is used on BE platforms like LS104X,
config option CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE can be
enabled.
This patch add skeleton for caam jobring driver
with probe and uintialisation functions
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
A common library, valid for dpaaX drivers, which is used to maintain
a local copy of PA->VA translations.
In case of physical addressing mode (one of the option for FSLMC, and
only option for DPAA bus), the addresses of descriptors Rx'd are
physical. These need to be converted into equivalent VA for rte_mbuf
and other similar calls.
Using the rte_mem_virt2iova or rte_mem_virt2phy is expensive. This
library is an attempt to reduce the overall cost associated with
this translation.
A small table is maintained, containing continuous entries
representing a continguous physical range. Each of these entries
stores the equivalent VA, which is fed during mempool creation, or
memory allocation/deallocation callbacks.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Switch over all parts of EAL to use heap ID instead of NUMA node
ID to identify heaps. Heap ID for DPDK-internal heaps is NUMA
node's index within the detected NUMA node list. Heap ID for
external heaps will be order of their creation.
This breaks the ABI, so document the changes.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch implements the Tx adapter APIs by invoking the
corresponding eventdev PMD callbacks and also provides
the common rte_service function based implementation when
the eventdev PMD support is absent.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
This patch contains the Meson and GNU Make build system extensions
required for the Distributed Event Device, and also the initialization
code for the driver itself.
Signed-off-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
RTE_LIBRTE_I40E_ITR_INTERVAL is not used. So it should also be removed
in config/rte_config.h for meson+ninja build.
Fixes: 864a800d70 ("net/i40e: remove VF interrupt handler")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This has been only build-tested for now, on a native ppc64el POWER8E
machine running Debian sid.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
For meson builds, the define to enable the symbol version
macros in rte_compat.h was missing. This led to symbols being
omitted from shared objects. For example, checking rte_distributor.so
with objdump and comparing make and meson built versions:
$ objdump -T make-build/lib/librte_distributor.so | grep _flush
0000000000001b60 g DF .text 00000000000000a7 (DPDK_2.0) rte_distributor_flush
0000000000003f10 g DF .text 0000000000000434 DPDK_17.05 rte_distributor_flush
$ objdump -T meson-build/lib/librte_distributor.so | grep _flush
0000000000001d50 g DF .text 00000000000000fb DPDK_2.0 rte_distributor_flush
Adding in the missing define fixes this.
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Reported-by: Luca Boccassi <bluca@debian.org>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Luca Boccassi <bluca@debian.org>
The patch changes rx_burst profiling approach:
1. VTune's instrumentation is removed
2. empty hook callback for profiling is added
This way all VTune-specific logic moves to the VTune side.
Hook is enabled only when CONFIG_RTE_ETHDEV_PROFILE_WITH_VTUNE option
is turned on. VTune uses this hook to attach to the polling cycle. It
is not possible to attach to the rx_burst directly, as it is inline.
Signed-off-by: Ilia Kurakin <ilia.kurakin@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
GCC version 4.8.5 does not pre-define __ARM_NEON. NEON is not
optional for ArmV8. Hence NEON related code can be enabled
when __aarch64__ is defined.
Bugzilla ID: 82
Cc: stable@dpdk.org
Reported-by: Raslan Darawsheh <rasland@mellanox.com>
Reported-by: Thomas F Herbert <therbert@redhat.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Octentx zipvf PMD provides hardware acceleration for
deflate and lzs compression and decompression operations
using Octeontx zip co-processor, which provide 8
virtualized zip devices.
This patch add basic initialization routine to register zip VFs
to compressdev library.
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Add initial PMD setup routines in compressdev
framework. ZLIB PMD appears as virtual compression
device. User would need to install zlib prior to
enabling this PMD.
Signed-off-by: Sunila Sahu <sunila.sahu@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
This patch adds Scatter-Gather List (SGL) feature to
QAT compression PMD.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Extend QAT guide to cover crypto and compression and common
information, particularly about kernel driver dependency.
Update release note.
Update compression feature list for qat.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Add Makefiles, meson files, and empty source files for compression PMD.
Handle cases for building either symmetric crypto PMD
or compression PMD or both and the common files both depend on.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
The driver supports Hyper-V networking directly like
virtio for KVM or vmxnet3 for VMware.
This code is based off of the FreeBSD driver. The file and variable
names are kept the same to help with understanding (with most of the
BSD style warts removed).
This version supports the latest NetVSP 6.1 version and
older versions.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This patch adds support for an additional bus type Virtual Machine BUS
(VMBUS) on Microsoft Hyper-V in Windows 10, Windows Server 2016
and Azure. Most of this code was extracted from FreeBSD and some of
this is from earlier code donated by Brocade.
Only Linux is supported at present, but the code is split
to allow future FreeBSD and Windows support.
The bus support relies on the uio_hv_generic driver from Linux
kernel 4.16. Multiple queue support requires additional sysfs
interfaces which is in kernel 5.0 (a.k.a 4.17).
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
By default, the DPAA2_USE_PHYS_IOVA setting with the make build-system
is "y", which is overridden to "n" in the config file specifically for
the arm64-dpaa2-linuxapp-gcc builds. The lack of this setting in meson
builds causes issues for 32-bit build, as the alternative code paths
have compiler warnings e.g. for i686 builds. Therefore we should align
the meson and make settings, setting the value to "true" by default and
overriding it to "false" for dpaa2-specific builds.
Fixes: 6ec78c2463 ("build: add meson support for dpaaX platforms")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Converting a 32-bit pointer to a 64-bit integer is generally safe, but
generates a lot of warnings when compiling 32-bit code with meson. The
warnings are not flagged when using make, so just disable them for
32-bit meson builds.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add support for interrupt driven queues when eth device is
configured for rxq interrupts and servicing weight for the
queue is configured to be zero.
A interrupt driven packet received counter has been added to
rte_event_eth_rx_adapter_stats.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
The following error hits if host cc compiler is clang(default one in most
linux distributions) and the cross compiler is gcc.
The root cause is: the hybride compilers add the warning options to the
meson project as project arguments, which apply for both host compiling and
cross compiling. But some options such as '-Wno-format-truncation' are not
supported nor recognized by clang, so they have to be removed from the
project arguments for the host compiler to run smoothily and added back as
cflags for the cross compiler to compile for cross source files.
The fix is remove unrecognized warning options from the meson project
arguments shared by gcc and clang, as add them specifically for gcc or
clang as cflags.
[265/893] Compiling C object
'buildtools/pmdinfogen/pmdinfogen@exe/pmdinfogen.c.o'. warning: unknown
warning option '-Wno-format-truncation' [-Wunknown-warning-option]
Fixes: a55277a788 ("devtools: add test script for meson builds")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Song Zhu <song.zhu@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This is to fix the unnecessary warning output, it is not consistent with
the configurations of other platforms.
WARNING: Cross file does not specify strip binary, result will not be
stripped.
Fixes: e53a5299d2 ("build: support vendor specific ARM cross builds")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Song Zhu <song.zhu@arm.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Most crypto PMDs do not have a limitation
of the number of the sessions that can be handled
internally. The value that was set before was not
actually used at all, since the sessions are created
at the application level.
Therefore, this value is not parsed from the initial
crypto parameters anymore and it is set to 0,
meaning that there is no actual limit.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Registered new dynamic logtype for driver and
replaced GCM_LOG_ERR and CDEV_LOG_ERR
with the new AESNI_GCM_LOG macro, which uses the new logtype.
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced ZUC_LOG_ERR and CDEV_LOG_ERR
with the new ZUC_LOG macro, which uses the new logtype.
Signed-off-by: Agalya Babu RadhaKrishnan <agalyax.babu.radhakrishnan@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced KASUMI_LOG_ERR and CDEV_LOG_ERR
with the new KASUMI_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced MB_LOG_ERR and CDEV_LOG_ERR
with the new AESNI_MB_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced OPENSSL_LOG_ERR and CDEV_LOG_ERR macros with
new OPENSSL_LOG macro, which uses the new logtype.
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Registered new dynamic logtype for driver and
replaced CS_LOG_ERR and RTE_LOG macros with
new CR_SCHED macro, which uses the new logtype.
Signed-off-by: Hari Kumar <hari.kumarx.vemula@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For cryptodev dynamic logging, conditional compilation of
debug logs is not actually required.
Signed-off-by: Jananee Parthasarathy <jananeex.m.parthasarathy@intel.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
For i40evf, internal rx interrupt and adminq interrupt share the same
source, that cause a lot cpu cycles be wasted on interrupt handler
on rx path. This is complained by customers which require low latency
(when set I40E_ITR_INTERVAL to small value), but have to be sufferred by
tremendous interrupts handling that eat significant CPU resources.
The patch disable pci interrupt and remove the interrupt handler,
replace it with a low frequency (50ms) interrupt polling daemon
which is implemented by registering a alarm callback periodly, this
save CPU time significently: On a typical x86 server with 2.1GHz CPU,
with low latency configure (32us) we saw CPU usage from top commmand
reduced from 20% to 0% on management core in testpmd).
Also with the new method we can remove compile option: I40E_ITR_INTERVAL
which is used to balance between low latency and low CPU usage previously.
Now we don't need it since we can reach both at same time.
Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
For all trace on the data-path move to dynamic logging.
Add new QAT_DP_LOG macro to separate from non-dp trace.
Use the overall RTE_LOG_DP_LEVEL to override and compile out
debug data-path trace.
Add "unlikely" in two appropriate error checks.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
For all trace not on the data-path move to dynamic logging.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Removed INIT_FUNC trace and other unused macros.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Make the compiler switch name and document name consistent as ``ifc`` to
avoid confusion. Also rename the map file to standard name for meson
build in the process.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch removes current support of Memory Region (MR) in order to
accommodate the dynamic memory hotplug patch. This patch can be compiled
but traffic can't flow and HW will raise faults. Subsequent patches will
add new MR support.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch removes current support of Memory Region (MR) in order to
accommodate the dynamic memory hotplug patch. This patch can be compiled
but traffic can't flow and HW will raise faults. Subsequent patches will
add new MR support.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
With this change, DPAA and DPAA2 configuration compiled applications
are interoperable without any impact on the functional behavior.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
When we check for libbsd we were just checking for the library itself.
However, on some distros, e.g. CentOS, libbsd will be found even though
it's not usable by DPDK as it's missing the string header. Therefore we
should check for both the library and the header file.
Fixes: 5364de644a ("eal: support strlcpy function")
Signed-off-by: Bruce Richarson <bruce.richardson@intel.com>
Reported-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Introduce rte_bpf_elf_load() function to provide ability to
load eBPF program from ELF object file.
It also adds dependency on libelf.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
librte_bpf provides a framework to load and execute eBPF bytecode
inside user-space dpdk based applications.
It supports basic set of features from eBPF spec
(https://www.kernel.org/doc/Documentation/networking/filter.txt).
Not currently supported features:
- JIT
- cBPF
- tail-pointer call
- eBPF MAP
- skb
- function calls for 32-bit apps
- mbuf pointer as input parameter for 32-bit apps
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Defined FPGA-BUS for Acceleration Drivers of AFUs
1. FPGA PCI Scan (1st Scan) follows DPDK UIO/VFIO PCI Scan Process,
probe Intel FPGA Rawdev Driver, it will be covered in following patches.
2. AFU Scan(2nd Scan) bind DPDK driver to FPGA Partial-Bitstream.
This scan is trigged by hotplug of IFPGA Rawdev probe, in this scan
the AFUs will be created and their drivers are also probed.
This patch will introduce rte_afu_device which describe the AFU device
listed in the FPGA-BUS.
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
CCP PMD supports authentication offload to either of CCP or CPU.
The earlier version of patch provides this option as compile time.
This patch changes this option from compile time to run time.
User can pass "ccp_auth_opt=1" as an additional arguments to vdev
parameter to enable authentication operations on CPU.
Signed-off-by: Ravi Kumar <ravi1.kumar@amd.com>
Adding basic skeleton of the ISA-L compression driver.
No compression functionality, but lays the foundation for
operations in the rest of the patchset.
The ISA-L compression driver utilizes Intel's ISA-L compression
library and compressdev API.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
New test created to measure offload cost.
Changes were introduced in API, turbo software driver
and test application
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
This commit introduces the initial tests for compressdev,
performing basic compression and decompression operations
of sample test buffers, using the Zlib library in one direction
and compressdev in another direction, to make sure that
the library is compatible with Zlib.
Due to the use of Zlib API, the test is disabled by default,
to avoid adding a new dependency on DPDK.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Lee Daly <lee.daly@intel.com>
Add basic functions to manage compress devices,
including driver and device allocation, and the basic
interface with compressdev PMDs.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Shally Verma <shally.verma@caviumnetworks.com>
Signed-off-by: Ashish Gupta <ashish.gupta@caviumnetworks.com>
Picking a company stock ticker for a PMD name might not be a best approach
in a long run since name is too generic.
This patch addresses that and renames mrvl to mvsam.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
This patch adds common code for the crypto adapter to support
SW and HW based transfer mechanisms. The adapter uses an EAL
service core function for SW based packet transfer and uses
the eventdev PMD functions to configure HW based packet
transfer between the crypto device and the event device.
This patch also adds adapter to the meson build system &
updates the necessary makefile & map file.
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
DPAA2 QDMA driver uses MC DPDMAI object. This driver enables
the user (app) to perform data DMA without involving CPU in
the DMA process
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
IXGBE vector PMD was re-enabled for 32 bits, but only for gcc.
This commit enables it for icc too.
Fixes: e6672d2f0f ("net/ixgbe: enable ixgbe vector PMD for i686")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The IFCVF vDPA (vhost data path acceleration) driver provides support for
the Intel FPGA 100G VF (IFCVF). IFCVF's datapath is virtio ring compatible,
it works as a HW vhost backend which can send/receive packets to/from
virtio directly by DMA.
Different VF devices serve different virtio frontends which are in
different VMs, so each VF needs to have its own DMA address translation
service. During the driver probe a new container is created, with this
container vDPA driver can program DMA remapping table with the VM's memory
region information.
Key vDPA driver ops implemented:
- ifcvf_dev_config:
Enable VF data path with virtio information provided by vhost lib,
including IOMMU programming to enable VF DMA to VM's memory, VFIO
interrupt setup to route HW interrupt to virtio driver, create notify
relay thread to translate virtio driver's kick to a MMIO write onto HW,
HW queues configuration.
- ifcvf_dev_close:
Revoke all the setup in ifcvf_dev_config.
Live migration feature is supported by IFCVF and this driver enables
it. For the dirty page logging, VF helps to log for packet buffer write,
driver helps to make the used ring as dirty when device stops.
Because vDPA driver needs to set up MSI-X vector to interrupt the
guest, only vfio-pci is supported currently.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently eal vfio framework binds vfio group fd to the default
container fd during rte_vfio_setup_device, while in some cases,
e.g. vDPA (vhost data path acceleration), we want to put vfio group
to a separate container and program IOMMU via this container.
This patch extends the vfio_config structure to contain per-container
user_mem_maps and defines an array of vfio_config. The next patch will
base on this to add container API.
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The manager provides a way to allocate physically and virtually
contiguous set of objects.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds the support for dynamic logging in dpaa_sec.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The virtio crypto device is a virtual cryptography device
as well as a kind of virtual hardware accelerator for
virtual machines. The linux kernel virtio-crypto driver
has been merged, and this patch introduces virtio crypto
PMD to achieve better performance.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Fan Zhang <roy.fan.zhang@intel.com>
Auth operations can be performed on CPU without offloading
to CCP if CONFIG_RTE_LIBRTE_PMD_CCP_CPU_AUTH is enabled in
DPDK configuration. CCP PMD skip offloading auth operations
to hardware engines and perform them using openssl APIs.
Signed-off-by: Ravi Kumar <ravi1.kumar@amd.com>
The make based build system has crc+crypto instruction
support for the default arm64 build.
http://dpdk.org/browse/dpdk/tree/mk/machine/armv8a/rte.vars.mk#n31
This patch fixes the disparity with meson build flags for armv8.
As a bonus, This patch fixes the following errors with
ip_pipeline example application.
Assembler messages:
Error: selected processor does not support `crc32cx w3,w3,x0'
Fixes: c6e536e384 ("build: add more implementers IDs and PNs for ARM")
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add librte_rawdev to the meson build of DPDK.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Meson reports the toolchain using cc.get_id and we can set RTE_TOOLCHAIN,
RTE_TOOLCHAIN_X in dpdk_conf so that it can be used by both x86 and arm.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit adds the logic that is shared by all event timer adapter
drivers; the common code handles instance allocation and some
initialization.
Signed-off-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
NFB cards employ multiple Ethernet ports.
Until now, Ethernet port-related operations were performed on all of them
(since the whole card was represented as a single port).
With new NFB-200G2QL card, this is no longer viable.
Since there is no fixed mapping between the queues and Ethernet ports,
and since a single card can be represented as two ports in DPDK,
there is no way of telling which (if any) physical ports should be
associated with individual ports in DPDK.
This is also described in documentation in more detail.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Signed-off-by: Jan Remes <remes@netcope.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Replace the BSD license header with the SPDX tag for files
with only an RehiveTech copyright on them.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The strncpy function is error prone for doing "safe" string copies, so
we generally try to use "snprintf" instead in the code. The function
"strlcpy" is a better alternative, since it better conveys the
intention of the programmer, and doesn't suffer from the non-null
terminating behaviour of it's n'ed brethern.
The downside of this function is that it is not available by default
on linux, though standard in the BSD's. It is available on most
distros by installing "libbsd" package.
This patch therefore provides the following in rte_string_fns.h to ensure
that strlcpy is available there:
* for BSD, include string.h as normal
* if RTE_USE_LIBBSD is set, include <bsd/string.h>
* if not set, fallback to snprintf for strlcpy
Using make build system, the RTE_USE_LIBBSD is a hard-coded value to "n",
but when using meson, it's automatically set based on what is available
on the platform.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The old RTE_LOG_LEVEL has been replaced by RTE_DP_LOG_LEVEL and
is not used anywhere in the current source tree.
It is a merge leftover.
Fixes: 43e9f17ce7 ("log: remove log level config option")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Some comments are not relevant in a config which only overrides
the default config.
The option CONFIG_RTE_LIBRTE_DPAA2_DEBUG_DRIVER is already disabled
by default so it can be removed from this file.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The name "mrvl" for Marvell PMD driver for PPv2 Marvell PPv2
(Packet Processor v2) 1/10 Gbps adapter is too generic and causes
problem for adding new PMD drivers for other Marvell devices.
Changed to "mvpp2" for specific Marvell PPv2 PMD.
This patch doesn't introduce any change except renaming.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
1) Add native PN option '-march=native' to allow automatic detection.
Set 'arm_force_native_march' to 'true' in config/arm/meson.build
to use native PN option.
2) Add implementer_pn option for part num selection in cross compile
3) Add known Arm cortex PN support
4) Add known implementers' IDs (use generic flags/archs by default)
5) Sync build options with config/common_armv8a_linuxapp
Signed-off-by: Herbert Guan <herbert.guan@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
When mlx5 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx5 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When mlx4 is not compiled directly as an independent shared object (e.g.
CONFIG_RTE_BUILD_SHARED_LIB not enabled for performance reasons), DPDK
applications inherit its dependencies on libibverbs and libmlx4 through
rte.app.mk.
This is an issue both when DPDK is delivered as a binary package (Linux
distributions) and for end users because rdma-core then propagates as a
mandatory dependency for everything.
Application writers relying on binary DPDK packages are not necessarily
aware of this fact and may end up delivering packages with broken
dependencies.
This patch therefore introduces an intermediate internal plug-in
hard-linked with rdma-core (to preserve symbol versioning) loaded by the
PMD through dlopen(), so that a missing rdma-core does not cause unresolved
symbols, allowing applications to start normally.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Skeleton rawdevice driver, on the lines of eventdev skeleton, is for
showcasing the rawdev library. This driver implements some of the
operations of the library based on which a test module can be
developed.
Design of skeleton involves a virtual device which is plugged into
VDEV bus on initialization.
Also, enable compilation of rawdev skeleton driver.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Each device in DPDK has a type associated with it - ethernet, crypto,
event etc. This patch introduces 'rawdevice' which is a generic
type of device, not currently handled out-of-the-box by DPDK.
A device which can be scanned on an installed bus (pci, fslmc, ...)
or instantiated through devargs, can be interfaced using
standardized APIs just like other standardized devices.
This library introduces an API set which can be plugged on the
northbound side to the application layer, and on the southbound side
to the driver layer.
The APIs of rawdev library exposes some generic operations which can
enable configuration and I/O with the raw devices. Using opaque
data (pointer) as API arguments, library allows a high flexibility
for application and driver implementation.
This patch introduces basic device operations like start, stop, reset,
queue and info support.
Subsequent patches would introduce other operations like buffer
enqueue/dequeue and firmware support.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
This commit enables dynamic logging with the SW pmd.
The string "pmd.event.sw" is used to change the verbosity
of the logging output, as per the newly defined log naming.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Add various vendor specific cross build targets.
This can be verified by using linaro toolchain and running
meson build --cross-file config/arm/arm64_<cpu>_<platform>_<compiler>
In future more cross build targets can be added.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add files to enable compiling for ARM native/cross builds.
This can be tested by doing a cross-compile for armv8-a type using
the linaro gcc toolchain.
meson arm-build --cross-file aarch64_cross.txt
ninja -C arm-build
where aarch64_cross.txt contained the following
[binaries]
c = 'aarch64-linux-gnu-gcc'
cpp = 'aarch64-linux-gnu-cpp'
ar = 'aarch64-linux-gnu-ar'
[host_machine]
system = 'linux'
cpu_family = 'aarch64'
cpu = 'armv8-a'
endian = 'little'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
DPDK has an optional dependency on libnuma, so manage that through the
build system, by dynamically detecting the presence of the needed library
and header files. Since this library is used by both EAL and vhost, check
for the presence at the top level in the config directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Since a number of libraries depend on the maths lib, as well as adding it
to the project args, we also need to add it to the pkgconfig file args.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Support compiling the FreeBSD kernel modules using meson and ninja.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Previous code only added in AVX, and a few other non-SSE flags to the
compile-time cpuflags because all SSE instruction set levels are now
required for an x86 build. However, some apps may still be checking for the
existing SSE ones in the legacy build system, so add them here for
completeness and compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
A subset of the dpdk headers are arch-dependent, but have common names
and thus cause a clash in a multiarch installation.
For example, rte_config.h is different for each target.
Add a "include_subdir_arch" option to allow a user to specify a
subdirectory for arch independent headers to fix multiarch support.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add the e1000, fm10k, i40e and ixgbe drivers to the meson & ninja build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add the af_packet, null, pcap and ring PMDs to the meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
