This patch fixes a trivial typo in i40e documentation;
The comment about the behavior upon DPDK application quit was wrongly
titled as "after DPDK application exist" instead of "after DPDK
application exit", and this trivial patch fixes it.
Fixes: edf1b61831 ("doc: add limitations for i40e PMD")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch exposes the following item fields through the flow command:
- MPLS label
- GRE protocol
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds MPLS and GRE items to generic rte flow.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch includes slowpath configuration and fastpath changes
to support LRO and TSO. A bit of revamping is needed in order
to make use of existing packet classification schemes in Rx fastpath
and for SG element processing in Tx.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add limited support for ntuple filter and flow director configuration.
The filtering is based on 4-tuples viz src-ip, dst-ip, src-port,
dst-port. The mask fields, tcp_flags, flex masks, priority fields,
Rx queue drop etc are not supported.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Updates the documentation and feature lists for the AVP PMD device.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds support for setting and clearing promiscuous mode on an AVP device.
When enabled the _mac_filter function will allow packets destined to any
MAC address to be processed by the receive functions.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds function required for receiving packets from the host application via
AVP device queues. Both the simple and scattered functions are supported.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds support for "dev_configure" operations to allow an application to
configure the device.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This commit introduces the AVP PMD file structure without adding any actual
driver functionality. Functional blocks will be added in later patches.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Most ConnectX-3 adapters expose two physical ports on a single PCI bus
address.
Add a new port parameter allowing the user to choose
either or both physical ports to be used by the application.
This parameter is used as follows:
Selecting only the second port:
-w 00:00.0,port=1
Selecting both ports:
-w 00:00.0,port=0,port=1
If no parameter is given, the default behavior is unchanged: all ports
are probed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add a CLI to set some TCs' strict link priority mode
on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific TC's max bandwidth
on a specific VF from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set TCs' min bandwidth on a specific VF
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific VF's TX max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set some TCs to strict priority mode.
It's a global setting on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set a specific TC's max bandwidth on a VF.
User can call the API to set VF TC's max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Allocate all TCs' relative bandwidth (percentage) on
a specific VF.
It can be taken as relative min bandwidth setting.
User can call the API to set VF TC's min bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Support setting VF max bandwidth from PF.
User can call the API on PF to set a specific VF's
max bandwidth.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
As tap is a virtual device, there's no physical way a link can be cut.
However, it has an associated kernel netdevice and possibly a remote
netdevice too. These netdevices link status may change outside of the
DPDK scope, through an external command such as:
ip link set dev tapX down
This commit implements link status notification through netlink.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
By default, a tap netdevice is of no use when not fed by a separate
process. The ability to automatically feed it from another netdevice
allows applications to capture any kind of traffic normally destined to
the kernel stack.
This patch implements this ability through a new optional "remote"
parameter.
Packets matching filtering rules created with the flow API are matched
on the remote device and redirected to the tap PMD, where the relevant
action will be performed.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Supported flow rules are now mapped to TC rules on the tap netdevice.
The netlink message used for creating the TC rule is stored in struct
rte_flow. That way, by simply changing a metadata in it, we can require
for the rule deletion without further parsing.
Supported items:
- eth: src and dst (with variable masks), and eth_type (0xffff mask).
- vlan: vid, pcp, tpid, but not eid.
- ipv4/6: src and dst (with variable masks), and ip_proto (0xffff mask).
- udp/tcp: src and dst port (0xffff) mask.
Supported actions:
- DROP
- QUEUE
- PASSTHRU
It is generally not possible to provide a "last" item. However, if the
"last" item, once masked, is identical to the masked spec, then it is
supported.
Only IPv4/6 and MAC addresses can use a variable mask. All other
items need a full mask (exact match).
Support for VLAN requires kernel headers >= 4.9, checked using
auto-config.sh.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
The flow API provides the ability to classify packets received by a tap
netdevice.
This patch only implements skeleton functions for flow API support, no
patterns are supported yet.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Tx datapath is bound to libefx control path, but
it should be possible to use other datapaths with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Rx datapath is bound to libefx control path, but
other datapaths should be possible to use with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enable Thunderx nicvf PMD driver in the common
config as it does not have build dependency
with any external library and/or architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
ConnectX-5 supports enhanced version of multi-packet send (MPS). An MPS Tx
descriptor can carry multiple packets either by including pointers of
packets or by inlining packets. Inlining packet data can be helpful to
better utilize PCIe bandwidth. In addition, Enhanced MPS supports hybrid
mode - mixing inlined packets and pointers in a descriptor. This feature is
enabled by default if supported by HW.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
A tap netdevice does not support flow control; ensure nothing but
RTE_FC_NONE mode can be set.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
