When removing a rte_device on a port-based request,
all the sibling ports must be marked as closed.
The iterator loop can be simplified by using the dedicated macro.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Iterating over siblings was done with RTE_ETH_FOREACH_DEV()
which skips the owned ports.
The new iterators RTE_ETH_FOREACH_DEV_SIBLING()
and RTE_ETH_FOREACH_DEV_OF() are more appropriate and more correct.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
If multiple ports share the same hardware device (rte_device),
they are siblings and can be found thanks to the new functions
and loop macros.
One iterator takes a port id as reference,
while the other one directly refers to the parent device.
The ownership is not checked because siblings may have
different owners.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
There are three states for an ethdev port.
Checking that the port is unused looks simpler than
checking it is neither attached nor removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx4_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smalle
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx5_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smaller
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Secondary process is not allowed to register MR due to a restriction of
library and kernel driver.
Fixes: 7e43a32ee060 ("net/mlx5: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In order to support secondary process, a few features are required.
a) rdma-core library should allocate device resources using DPDK's
memory allocator.
b) UAR should be remapped for secondary processes. Currently, in order
not to use different data structure for secondary processes, PMD
tries to reserve identical virtual address space for both primary
and secondary processes.
c) IPC channel is necessary, which can be easily set with rte_mp APIs.
Through the channel, Verbs command FD is delivered to the secondary
process and the device stop/start event is also broadcast from
primary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
To support secondary process, the memory allocated by library such as
completion rings (CQ) and buffer rings (WQ) must be manageable by EAL,
in order to share it with secondary processes. With new changes in
rdma-core and kernel driver, it is possible to provide an external
allocator to the library layer for this purpose. All such resources
will now be allocated within DPDK framework.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
rte_eth_devices[] is not shared between primary and secondary process,
but a static array to each process. The reverse pointer of device
(priv->dev) becomes invalid if mlx4 supports secondary process.
Instead, priv has the pointer to shared data of the device,
struct rte_eth_dev_data *dev_data;
Two macros are added,
#define PORT_ID(priv) ((priv)->dev_data->port_id)
#define ETH_DEV(priv) (&rte_eth_devices[PORT_ID(priv)])
Cc: stable@dpdk.org
Suggested-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rx/Tx burst function pointers are stored in the rte_eth_dev structure,
which is local to a process. Even though primary process replaces the
function pointers, secondary will not run the new ones. With rte_mp
APIs, primary can easily broadcast a request to stop/start the datapath
of secondary processes.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There's more need to have PMD global data structure. This should be
initialized once per a process regardless of how many PMD instances are
probed. mlx5_init_once() is called during probing and make sure all the
init functions are called once per a process. Currently, such global
data and its initialization functions are even scattered. Rather than
'extern'-ing such variables and calling such functions one by one making
sure it is called only once by checking the validity of such variables, it
will be better to have a global storage to hold such data and a
consolidated function having all the initializations. The existing shared
memory gets more extensively used for this purpose. As there could be
multiple secondary processes, a static storage (local to process) is also
added.
As the reserved virtual address for UAR remap is a PMD global resource,
this doesn't need to be stored in the device priv structure, but in the
PMD global data.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Socket API is used for IPC in order for secondary process to acquire
Verb command file descriptor. The FD is used to remap UAR address.
The multi-process APIs (rte_mp) in EAL are newly introduced.
mlx5_socket.c is replaced with mlx5_mp.c, which uses the new APIs.
As it is PMD global infrastructure, only one IPC channel is established.
All the IPC message types may have port_id in the message if there is
need to reference a specific device.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
As the memory event is propagated to secondary processes, the event is
processed redundantly. This should be processed once because the data
structure used for MR and the event is global across the processes.
Fixes: 974f1e7ef146 ("net/mlx5: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When replenishing mbufs on Rx, buffer address (mbuf->buf_addr) should be
loaded. non-x86 processors (mostly RISC such as ARM and Power) are more
vulnerable to load stall. For x86, reducing the number of instructions
seems to matter most.
For x86, this is simply a load but for other architectures, it is
calculated from the address of mbuf structure by rte_mbuf_buf_addr()
without having to load the first cacheline of the mbuf.
Fixes: 12d468a62bc1 ("net/mlx5: fix instruction hotspot on replenishing Rx buffer")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Update the LTS section to mention the branch and how LTS support ends.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If a stable branch for a specific DPDK release is to proceed,
along with needing a maintainer, there should also be commitment
from major contributors for validation of the releases.
Also, as decided in the March 27th techboard, to facilitate user
planning, a release should be designated as a stable release
no later than 1 month after it's initial master release.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The doc examples are not aligned on the script following the
incriminated commit.
Fixes: c4a5fe3bf832 ("devtools: rework ABI checker script")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch fixes two typos in the coding style part of
DPDK contributing guide:
- The header entry should have .h file instead of .c file.
- The will->This will
Fixes: 44a6dface13b ("doc: describe how to add new components")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used.
Fixes: 473d1bebce ("hash: allow to store data in hash table")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Yipeng Wang <yipeng1.wang@intel.com>
sprintf function is not secure as it doesn't check the length of string.
replaced sprintf with strlcpy.
Fixes: f74df2c57e ("test/distributor: test single and burst API")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Add support for route by port mode. The route by port
feature in HW helps in translating the PCI address
of connected device.
Signed-off-by: Minghuan Lian <minghuan.lian@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds support the batch processing for the qdma jobs
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Yi Liu <yi.liu@nxp.com>
These APIs has been in the DPDK for few release now.
This patch removes the experimental tags for the APIs.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The current value is 10, which is not sufficient for many use-cases.
e.g. NXP LX2 with raw qdma devices can use 32-48 raw devices in some
use-cases. So, making it to 64 to cover various cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
With the change in MC firmware, minimum supported version of
the Layerscape SDK too needs to be changed.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.10.x version. This
patch bumps the min supported version to 10.14.x.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Removes some unused firmware code which was added in last bump
of the firmware version. No current features uses these APIs.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The existing cocci script for coccinelle replaces all matching instances
of snprintf() with strlcpy() without regards to header inclusion. To allow
changes without build errors, we create a safer version of this script
that only makes changes when the rte_string_fns.h header is already
included.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The original coccinelle script worked by replacing instances of
snprintf(.."%s",...) with strlcpy(), but only where the source and dest
parameters were plain identifiers. Allowing expressions for those params
opens up a wide range of other possible changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Using the size of the source string is incorrect when printing using
snprintf. Instead pass in the buffer size to be used appropriately.
Fixes: 457ecf2953fc ("bond: add debug info for mode 6")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
When creating files on disk, e.g. for EAL configuration or shared memory
locks, etc., there is no need to grant any permissions on those files to
other users. All directories are already created with 0700 permissions, so
we should create all files with 0600 permissions.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
