Changes to make ipsec-secgw data-path code to utilize librte_ipsec library.
Note that right now by default current (non-librte_ipsec) code-path will
be used. User has to run application with new command-line option ('-l')
to enable new codepath.
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Changes to make ipsec-secgw to utilize librte_ipsec library.
That patch provides:
- changes in the related data structures.
- changes in the initialization code.
- new command-line parameters to enable librte_ipsec codepath
and related features.
Note that right now by default current (non-librte_ipsec) code-path will
be used. User has to run application with new command-line option ('-l')
to enable new codepath.
The main reason for that:
- current librte_ipsec doesn't support all ipsec algorithms
and features that the app does.
- allow users to run both versions in parallel for some time
to figure out any functional or performance degradation with the
new code.
It is planned to deprecate and remove non-librte_ipsec code path
in future releases.
Signed-off-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In some cases crypto-ops could never be dequeued from the crypto-device.
The easiest way to reproduce:
start ipsec-secgw with crypto-dev and send to it less then 32 packets.
none packets will be forwarded.
Reason for that is that the application does dequeue() from crypto-queues
only when new packets arrive.
This patch makes the app to call dequeue() on a regular basis.
Also to make code cleaner and easier to understand,
it separates crypto-dev enqueue() and dequeue() code paths.
pkt_process() now only enqueues packets into crypto device,
dequeuing and final processing is done by drain_crypto_queues().
Fixes: c64278c0c18b ("examples/ipsec-secgw: rework processing loop")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In some cases it is useful to allow user to specify destination
ether address for outgoing packets.
This patch adds such ability by introducing new 'neigh' config
file option.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Right now ipsec-secgw always enables TX offloads
(DEV_TX_OFFLOAD_MULTI_SEGS, DEV_TX_OFFLOAD_SECURITY),
even when they are not requested by the config.
That causes many PMD to choose full-featured TX function,
which in many cases is much slower then one without offloads.
That patch adds ability for the user to disable unneeded HW offloads.
If DEV_TX_OFFLOAD_IPV4_CKSUM is disabled by user, then
SW version of ip cksum calculation is used.
That allows to use vector TX function, when inline-ipsec is not
requested.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch uses the two session mempool approach to all cryptodev
sample applications. One mempool is for session header objects, and
the other is for session private data.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Update get_priv() to use rte_mbuf_to_priv() to access the private
area in the mbuf.
In inbound_sa_check(), use the application's get_priv() function to
access the private area in the mbuf.
Signed-off-by: Dan Gora <dg@adax.com>
Revert previous patch that introduce a performance
degradation in certain scenarios and add a configurable
limit for number inflight packets.
Revert
commit 84d4b5e4ec48 ("examples/ipsec-secgw: improve IPsec dequeue logic")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For inline protocol processing, the PMD/device is required to maintain
the ESN. But the application is required to monitor ESN overflow to
initiate SA expiry.
For such cases, application would set the ESN soft limit. An IPsec event
would be raised by rte_eth_event framework, when ESN hits the soft limit
set by the application.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Mellanox INNOVA NIC needs to have final target queue actions to perform
inline crypto.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Ipsec-secgw application is modified so that it can support
following type of actions for crypto operations
1. full protocol offload using crypto devices.
2. inline ipsec using ethernet devices to perform crypto operations
3. full protocol offload using ethernet devices.
4. non protocol offload
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
AEAD algorithms were not being added in the mapping
between algorithms and crypto devices, only cipher and
authentication chained algorithms.
Fixes: 501e9c226adf ("examples/ipsec-secgw: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Instead of creating the session mempool while configuring
the crypto device, apps will create the mempool themselves.
This way, it gives flexibility to the user to have a single
mempool for all devices (as long as the objects are big
enough to contain the biggest private session size) or
separate mempools for different drivers.
Also, since the mempool is now created outside the
device configuration function, now it needs to be passed
through this function, which will be eventually passed
when setting up the queue pairs, as ethernet devices do.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Cryptodev session structure was a duplication of the
cryptodev symmetric structure.
It was used by some PMDs that should use the symmetric
structure instead.
Since this structure was internal, there is no deprecation
notice required.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since there is a new operation type (AEAD), add parameters
for this in the application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV parameters (offset and length) should not
change for operations in the same session, these parameters
are moved to the crypto transform structure, so they will
be stored in the sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Usually, IV will change for each crypto operation.
Therefore, instead of pointing at the same location,
IV is copied after each crypto operation.
This will let the IV to be passed as an offset from
the beginning of the crypto operation, instead of
a pointer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add minor adjustments to support SHA256 HMAC:
- extend maximum key length to match SHA256 HMAC
- add SHA256 HMAC parameters and configuration string
- add SHA256 HMAC to inbound and outbound cases
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Add support for AES-GCM (Galois-Counter Mode).
RFC4106: The Use of Galois-Counter Mode (GCM) in IPSec ESP.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
NIST SP800-38A recommends two methods to generate unpredictable IVs
(Initilisation Vector) for CBC mode:
1) Apply the forward function to a nonce (ie. counter)
2) Use a FIPS-approved random number generator
This patch implements the first recommended method by using the forward
function to generate the IV.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds the configuration file support to ipsec_secgw
sample application. Instead of hard-coded rules, the users can
specify their own SP, SA, and routing rules in the configuration
file. A command line option "-f" is added to pass the
configuration file location to the application.
Configuration item formats:
SP rule format:
sp <ip_ver> <dir> esp <action> <priority> <src_ip> <dst_ip> \
<proto> <sport> <dport>
SA rule format:
sa <dir> <spi> <cipher_algo> <cipher_key> <auth_algo> <auth_key> \
<mode> <src_ip> <dst_ip>
Routing rule format:
rt <ip_ver> <src_ip> <dst_ip> <port>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
GCC 4.5.x does not handle well initializing anonymous union and/or
structs.
To make the compiler happy we name those anonymous union/struct.
Fixes: 906257e965b7 ("examples/ipsec-secgw: support IPv6")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
IPSec transport mode support.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Support IPSec IPv6 allowing IPv4/IPv6 traffic in IPv4 or IPv6 tunnel.
We need separate Routing (LPM) and SP (ACL) tables for IPv4 and IPv6,
but a common SA table.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Rework implementation moving from function pointers approach, where each
function implements very specific functionality, to a generic function
approach.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The debug logs must be enabled at compile-time and run-time.
There are also some internal flags in some examples to enable the debug
logs of the applications. They are now enabled in debug configs and
can be disabled thanks to the more generic logtype mechanism:
rte_set_log_type(RTE_LOGTYPE_USER1, 0);
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
In FreeBSD, sys/types.h and netinet/in.h need to be included before
netinet/ip.h
There were missed typedef for u_char - <sys/types.h>
There were missed network definitions - <netinet/in.h>
Failure #13: http://dpdk.org/ml/archives/test-report/2016-March/001896.html
Fixes: d299106e8e31 ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Sample app implementing an IPsec Security Geteway.
The main goal of this app is to show the use of cryptodev framework
in a "real world" application.
Currently only supported static IPv4 ESP IPsec tunnels for the following
algorithms:
- Cipher: AES-CBC, NULL
- Authentication: HMAC-SHA1, NULL
Not supported:
- SA auto negotiation (No IKE implementation)
- chained mbufs
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
