This patch replaces instances of zero-sized arrays i.e. those at the end
of structures with "[0]" with the more standard syntax of "[]".
Replacement was done using coccinelle script, with some revert and
cleanup of whitespace afterwards.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
There are some crypto driver related thread specific
variables which are no longer used, so removing them.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Adding useful debug prints in DPAA driver for
easy debugging. A devarg is added to enable various levels
of prints.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Supplement the missing half of braces for the extern "C" block,
or remove the incomplete guard in internal header.
Fixes: 6d6b4f49a155 ("bus/dpaa: add FMAN hardware operations")
Fixes: 919eeaccb2ba ("bus/dpaa: introduce NXP DPAA bus driver skeleton")
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
For shared MAC interface, it is a prerequisite to enable the
interface in the kernel, before using it in user-space. This
patch makes sure that device is not getting configured in
case shared MAC interface is not enabled in the kernel.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The DPAA DMA driver is an implementation of the dmadev APIs,
that provide means to initiate a DMA transaction from CPU.
The initiated DMA is performed without CPU being involved
in the actual DMA transaction. This is achieved via using
the QDMA controller of DPAA SoC.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Removing direct access to interrupt handle structure fields,
rather use respective get set APIs for the same.
Making changes to all the drivers access the interrupt handle fields.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Currently there are some public headers that include 'sys/queue.h', which
is not POSIX, but usually provided by the Linux/BSD system library.
(Not in POSIX.1, POSIX.1-2001, or POSIX.1-2008. Present on the BSDs.)
The file is missing on Windows. During the Windows build, DPDK uses a
bundled copy, so building a DPDK library works fine. But when OVS or other
applications use DPDK as a library, because some DPDK public headers
include 'sys/queue.h', on Windows, it triggers an error due to no such
file.
One solution is to install the 'lib/eal/windows/include/sys/queue.h' into
Windows environment, such as [1]. However, this means DPDK exports the
functionalities of 'sys/queue.h' into the environment, which might cause
symbols, macros, headers clashing with other applications.
The patch fixes it by removing the "#include <sys/queue.h>" from
DPDK public headers, so programs including DPDK headers don't depend
on the system to provide 'sys/queue.h'. When these public headers use
macros such as TAILQ_xxx, we replace it by the ones with RTE_ prefix.
For Windows, we copy the definitions from <sys/queue.h> to rte_os.h
in Windows EAL. Note that these RTE_ macros are compatible with
<sys/queue.h>, both at the level of API (to use with <sys/queue.h>
macros in C files) and ABI (to avoid breaking it).
Additionally, the TAILQ_FOREACH_SAFE is not part of <sys/queue.h>,
the patch replaces it with RTE_TAILQ_FOREACH_SAFE.
[1] http://mails.dpdk.org/archives/dev/2021-August/216304.html
Suggested-by: Nick Connolly <nick.connolly@mayadata.io>
Suggested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Narcisa Vasile <navasile@linux.microsoft.com>
Remove experimental tag from internal API dpaa_seqn.
This API was introduced in DPDK 20.11 and is now moved to
internal tag.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Added macros to simplify print of MAC address.
The six bytes of a MAC address are extracted in
a macro here, to improve code readablity.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Added macro to print six bytes of MAC address.
The MAC addresses will be printed in upper case
hexadecimal format.
In case there is a specific check for lower case
MAC address, the user may need to make a change in
such test case after this patch.
Signed-off-by: Aman Deep Singh <aman.deep.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add check for the PCD queue from the kernel interface
for default and error queues.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reuse DPDK rte_gettid instead of syscall.
It will help to reduce the dpaa portal allocation time.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
if was allocated with rte_malloc, free shall be equivalent.
Fixes: 4762b3d419c3 ("bus/dpaa: delay fman device list to bus probe")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The header files argp.h and error.h do not exist in musl libc.
Fix build with musl libc by using err(3) instead of
the GNU-specific error(3).
We could have used the identical errx("...: %s", strerror(ret))` but
strerror(3) is not thread-safe and the strerror_r variant has two
incompatible versions, one GNU specific and one XSI-compliant.
Avoid the mess by letting "err" use the thread-local errno.
This also fixes error message for kzmalloc failures which previously
would always have given "Unknown error -1", since that is what
strerror(-1) returns. Let "err" use the proper error message from errno
which is set by kzalloc.
Fixes: 9d32ef0f5d61 ("bus/dpaa: support creating dynamic HW portal")
Fixes: f09ede6c8fd1 ("bus/dpaa: add BMAN driver core")
Fixes: 5b22cf744689 ("bus/dpaa: introducing FMan configurations")
Fixes: 39f373cf015a ("bus/dpaa: add compatibility and helper macros")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
There is no standard saying that __WORDSIZE should be defined or in
what include it should be defined. Use RTE_ARCH_64 instead.
This solves a warning when building with musl libc:
warning: "__WORDSIZE" is not defined, evaluates to 0 [-Wundef]
Fixes: 847ee3bd0d1f ("bus/dpaa: support FMAN frame queue lookup")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: David Marchand <david.marchand@redhat.com>
1. It is not a error if no network device available. One can
only use crypto device
2. Improve logging for failure in detecting the bus
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA can share an interface on classification criteria with kernel.
This patch enables default kernel driver to be used as a shared MAC
interface with DPDK interface. (provided that VSP is enabled on that
interface.)
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reading of word un-aligned values after reading word aligned
values lead to corruption of memory.
This patch make changes such that word aligned access is made,
before making an un-aligned access
Fixes: 6d6b4f49a155 ("bus/dpaa: add FMAN hardware operations")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The rte_ethdev_driver.h, rte_ethdev_vdev.h and rte_ethdev_pci.h files are
for drivers only and should be a private to DPDK and not installed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Steven Webster <steven.webster@windriver.com>
Device name parsing is done on all buses during device iterations at
either EAL or ethdev levels.
When a bus implements device name parsing slowly, all iterations are
impacted. Efficient implementation is important.
The DPAA bus device name parsing has two issues: it allocates dynamic
memory and uses snprintf without a real need for it. Both can be
avoided, which improves the parsing performance.
The function is also simpler and shorter.
Signed-off-by: Gaetan Rivet <grive@u256.net>
Reasons for building not supported generally start with lowercase
because printed as the second part of a line.
Other changes:
- "linux" should be "Linux" with a capital letter.
- ARCH_X86_64 may be simply x86_64.
- aarch64 is preferred over arm64.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Rename the enum values in the EAL include files.
As a backward compatible temporary migration tool, define
a replacement mapping for old values.
The old names relating to blacklist and whitelist are replaced
by block list and allow list, but applications may be using the
older compatibility macros, marked as deprecated.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Gaetan Rivet <grive@u256.net>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The dpaa drivers have been hacking the deprecated field seqn for
internal features.
It is moved to a dynamic mbuf field in order to allow removal of seqn.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Replace master lcore with main lcore and
replace slave lcore with worker lcore.
Keep the old functions and macros but mark them as deprecated
for this release.
The "--master-lcore" command line option is also deprecated
and any usage will print a warning and use "--main-lcore"
as replacement.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since each version map file is contained in the subdirectory of the library
it refers to, there is no need to include the library name in the filename.
This makes things simpler in case of library renaming.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
This patch adds support to get/set link speed, duplex and
autoneg mode status from/to PHY. Enhance device capabilities
to advertise all supported link speeds according to mac type.
Also enables fallback support for get link status API where
kernel support is missing.
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Enables a debugging queue to fetch error (Rx/Tx) packets
to user space. Earlier all packets with L3/L4 checksum
errors were getting dropped by the hardware.
Setting CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=y is required
which enables following enhancements.
1) Enable TX/RX error queues to check the errors packet.
2) Display error frame information(payload, status, paresr result).
3) Send error packets to application
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
The fd is possibly a negative value while it is passed as an
argument to function "close". Fix the check to the fd.
Fixes: b9c94167904f ("bus/dpaa: decouple FQ portal alloc and init")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds support for Virtual Storage profile (VSP) feature.
With VSP support when memory pool is created, the hw buffer pool id
i.e. bpid is not allocated; the bpid is identified by dpaa flow
create API.
The memory pool of RX queue is attached to specific BMan pool
according to the VSP ID when RX queue is setup.
For fmlib based hash queue, VSP base ID is assigned to each queue.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A shared MAC interface is an interface which can be used
by both kernel and userspace based on classification configuration
It is defined in dts with the compatible string
"fsl,dpa-ethernet-shared" which bpool will be seeded by the dpdk
partition and configured as a netdev by the dpaa Linux eth driver.
User space buffers from the bpool will be kmapped by the kernel.
Signed-off-by: Radu Bulie <radu-andrei.bulie@nxp.com>
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch uses fmlib to configure the FMAN HW for flow
and distribution configuration, thus avoiding the need
for static FMC tool execution optionally.
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A decision was made [1] to no longer support Make in DPDK, this patch
removes all Makefiles that do not make use of pkg-config, along with
the mk directory previously used by make.
[1] https://mails.dpdk.org/archives/dev/2020-April/162839.html
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Enabled set link status API to start/stop phy
device from application.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Enable/disable link state interrupt and get link state api is
defined using IOCTL calls from kernel driver
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Minimize the number of different thread variables
Add all the thread specific variables in dpaa_portal
structure to optimize TLS Usage.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Now that all libraries have a single version, we can drop the empty
stable blocks that had been added when moving symbols from stable to
internal ABI.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Introduce the RTE_LOG_REGISTER macro to avoid the code duplication
in the logtype registration process.
It is a wrapper macro for declaring the logtype, registering it and
setting its level in the constructor context.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Sachin Saxena <sachin.saxena@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patches fixes a null pointer dereferencing that happens
when the device string passed to the iterator is NULL. This
situation can happen when iterating on a class type.
For example:
RTE_DEV_FOREACH(dev, "class=eth", &dev_iter) {
...
}
Fixes: e79df833d3f6 ("bus/dpaa: support hotplug ops")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Adrián Moreno <amorenoz@redhat.com>
