The capability of a hardware event device should be checked before
creating a event crypto adapter in a particular mode. The test case
returns error if the mode is not supported.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Allows creation of net_null if vdev EAL option is not specified and
uninit vdev created in the test. The change also adds error checks
for vdev init and uninit.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
adapter_multi_eth_add_del() does vdev init but doesn't uninit them.
This causes issues when running event_eth_rx_adapter_autotest multiple
times.
The fix does vdev uninit before exiting the test.
Signed-off-by: Jay Jayatheerthan <jay.jayatheerthan@intel.com>
Reviewed-by: Nikhil Rao <nikhil.rao@intel.com>
A new functions which uses the structure of the test vectors for SDAP
is added and call a functions responsible to call the test_pdcp_proto
with the test vector both for encapsulation and decapsulation.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
The function test_pdcp_proto was relying to heavily on the structure
of test vectors for PDCP making it difficult to be reusable.
The function is changed to take all the test parameters as input and
does not need access to the tests vectors anymore.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
The test vectors are structured in a more readable way compared
to test vector for PDCP. This structure allows to have all the
information about a test vector at the same place.
Signed-off-by: Franck Lenormand <franck.lenormand@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates the xform with right configuration.
For session based ops, sym session pool is created with
valid userdata size.
Fixes: 24054e3640a2 ("test/crypto: use separate session mempools")
Cc: stable@dpdk.org
Signed-off-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch adds the cryptodev raw API test support to unit test.
In addition a new test-case for QAT PMD for the test type is
enabled.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This patch updates ``rte_crypto_sym_vec`` structure to add
support for both cpu_crypto synchronous operation and
asynchronous raw data-path APIs. The patch also includes
AESNI-MB and AESNI-GCM PMD changes, unit test changes and
documentation updates.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Switched from device specific test suite to unified
cryptodev test suite. Removed the armv8 device specific test suite.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
ut_setup / ut_teardown are invoked for each test case by test framework.
The call inside test_stats is unnecessary and even incorrect.
This caused double free of objects such as crypto operation structure.
Trapped the issue when RTE_LIBRTE_MEMPOOL_DEBUG was enabled.
Fix issue by removing ut_setup / ut_teardown from test case implementation.
Fixes: 202d375c60bc ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Adam Dybkowski <adamx.dybkowski@intel.com>
This patch adds AES-ECB 128, 192 and 256 support to the aesni_mb PMD.
AES-ECB 128, 192 and 256 test vectors added to cryptodev tests.
Signed-off-by: Marcel Cornu <marcel.d.cornu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
5G DL default symlink was pointing to a 4G vector.
Fixes: d762705308c4 ("app/bbdev: add test vectors for 5GNR")
Cc: stable@dpdk.org
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Aidan Goddard <aidan.goddard@accelercomm.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
This patch replaces the usage of the word 'slave' with more
appropriate word 'worker' in QAT PMD and Scheduler PMD
as well as in their docs. Also the test app was modified
to use the new wording.
The Scheduler PMD's public API was modified according to the
previous deprecation notice:
rte_cryptodev_scheduler_slave_attach is now called
rte_cryptodev_scheduler_worker_attach,
rte_cryptodev_scheduler_slave_detach is
rte_cryptodev_scheduler_worker_detach,
rte_cryptodev_scheduler_slaves_get is
rte_cryptodev_scheduler_workers_get.
Also, the configuration value RTE_CRYPTODEV_SCHEDULER_MAX_NB_SLAVES
was renamed to RTE_CRYPTODEV_SCHEDULER_MAX_NB_WORKERS.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_lte_fec API is still experimental.
Fixes: efd453698c49 ("baseband/fpga_lte_fec: add driver for FEC on FPGA")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
DPDK APIs have to be prefixed with "rte_" in order to avoid
namespace pollution.
Let's fix it while fpga_5gnr_fec API is still experimental.
Fixes: 2d4306438c92 ("baseband/fpga_5gnr_fec: add configure function")
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Add configure function to configure the PF from within
the bbdev-test itself without external application
configuration the device.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add in the "info_get" function to the driver, to allow us to query the
device.
No processing capability are available yet.
Linking bbdev-test to support the PMD with null capability.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Liu Tianjiao <tianjiao.liu@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In testsuite_setup(), ts_params is configured for first valid device.
The same device should be used as valid device in
test_device_configure_invalid_dev_id test case.
Fixes: 202d375c60bc ("app/test: add cryptodev unit and performance tests")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The option RTE_EAL_ALWAYS_PANIC_ON_ERROR was off by default,
and not customizable with meson. It is completely removed.
The function rte_dump_registers is a trace of the bare metal support
era, and was not supported in userland. It is completely removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This commit adds new rte_prefetchX_write() variants, that suggest to the
compiler to use a prefetch instruction with intention to write. As a
compiler builtin, the compiler can choose based on compilation target
what the best implementation for this instruction is.
Three versions are provided, targeting the different levels of cache.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Modify the test_sched application to build the hierarchical scheduler
with default subport bandwidth profile. It also allows to update
a subport with different subport rates dynamically
Signed-off-by: Savinay Dharmappa <savinay.dharmappa@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
struct cmdline exposes platform-specific members it contains, most
notably struct termios that is only available on Unix. While ABI
considerations prevent from hinding the definition on already supported
platforms, struct cmdline is considered logically opaque from now on.
Add a deprecation notice targeted at 20.11.
* Remove tests checking struct cmdline content as meaningless.
* Fix missing cmdline_free() in unit test.
* Add cmdline_get_rdline() to access history buffer indirectly.
The new function is currently used only in tests.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Introduce classify implementation that uses AVX512 specific ISA.
rte_acl_classify_avx512x32() is able to process up to 32 flows in parallel.
It uses 512-bit width registers/instructions and provides higher
performance then rte_acl_classify_avx512x16(), but can cause
frequency level change.
Note that for now only 64-bit version is supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce classify implementation that uses AVX512 specific ISA.
rte_acl_classify_avx512x16() is able to process up to 16 flows in parallel.
It uses 256-bit width registers/instructions only
(to avoid frequency level change).
Note that for now only 64-bit version is supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
- enhance output to print extra stats
- use rte_rdtsc_precise() for cycle measurements
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch enables the optimized calculation of CRC32-Ethernet and
CRC16-CCITT using the AVX512 and VPCLMULQDQ instruction sets. This CRC
implementation is built if the compiler supports the required instruction
sets. It is selected at run-time if the host CPU, again, supports the
required instruction sets.
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds new flags into the test_cpuflags() functions for ARM64
platform, such as RTE_CPUFLAG_SVE, etc.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
RTE_ARCH_xx flags are used to distinguish platform architectures.
These flags can be used to pick different code paths for different
architectures at compile time.
For Arm platforms, there are 3 flags in use: RTE_ARCH_ARM,
RTE_ARCH_ARMv7 and RTE_ARCH_ARM64.
RTE_ARCH_ARM64 is for 64-bit aarch64 platforms,
and RTE_ARCH_ARM & RTE_ARCH_ARMv7 are for 32-bit platforms.
RTE_ARCH_ARMv7 is for ARMv7 platforms as its name suggested.
The issue is meaning of RTE_ARCH_ARM is not clear enough.
Because no info about platform word length is included in the name.
To make the flag names more clear, a naming scheme is proposed.
RTE_ARCH_ARM (all Arm platforms)
|
+----RTE_ARCH_32 (New. 32-bit platforms of all architectures)
| |
| +----RTE_ARCH_ARMv7 (ARMv7 platforms)
| |
| +----RTE_ARCH_ARMv8_AARCH32 (aarch32 state on aarch64 machine)
|
+----RTE_ARCH_64 (64-bit platforms of all architectures)
|
+----RTE_ARCH_ARM64 (64-bit Arm platforms)
RTE_ARCH_32 will be explicitly defined for 32-bit platforms.
To fit into the new naming scheme, current usage of RTE_ARCH_ARM in
project is mapped to (RTE_ARCH_ARM && RTE_ARCH_32).
Matching flags for other architectures are:
RTE_ARCH_X86
|
+----RTE_ARCH_32
| |
| +----RTE_ARCH_I686
| |
| +----RTE_ARCH_X86_X32
|
+----RTE_ARCH_64
|
+----RTE_ARCH_X86_64
RTE_ARCH_PPC_64 ---- RTE_ARCH_64
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
This commit adds testpmd capability to query and config FEC
function of device. This includes:
- show FEC capabilities, example:
testpmd> show port 0 fec capabilities
- show FEC mode, example:
testpmd> show port 0 fec_mode
- config FEC mode, example:
testpmd> set port <port_id> fec_mode auto|off|rs|baser
where:
auto|off|rs|baser are four kinds of FEC mode which dev
support according to MAC link speed.
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Chengchang Tang <tangchengchang@huawei.com>
This patch adds tests for verifying telemetry data structures are
converted to JSON as expected. Both flat and recursive data structures
are tested, for all possible value types.
The app connects to the telemetry socket as a client, and registers one
command with a corresponding callback function. Each time the callback
function is called, it copies a global data variable to the data pointer
passed in by telemetry.
When a test case is run, the test case function builds up the global
data variable with the relevant data types, and the expected json string
output which should be generated from that. The 'test_output()' function
is used to trigger the callback and ensure the actual output matches
that expected.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
As well as this is correct thing to close devices before exit, it is
also useful to test the closing devices from secondary process.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since the rawdev autotest can now be used to test all rawdevs on the
system, there is no need for a dedicated ioat autotest command.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Rather than having each rawdev provide its own autotest command, we can
instead just use the generic rawdev_autotest to test any and all available
rawdevs.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Changed scripts to explicitly use Python 3 only, to avoid
maintaining Python 2.
Removed deprecation notices.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
The ethdev port id should be 16 bits now. This patch changes the
variable size of port id in applications from 8 bits to 16 bits.
Fixes: e977e4199a8d ("app/testpmd: add commands to load/unload BPF filters")
Fixes: 46cf97e4bbfa ("eventdev: add test for eth Tx adapter")
Cc: stable@dpdk.org
Signed-off-by: Chenbo Xia <chenbo.xia@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ability to distinguish ICMP identifier fields in packets.
Distinguish ICMP sequence number field too.
Already supports ICMP code and type fields in current version.
Existing fields in ICMP header contain the required information.
ICMP header already is supported and no code change in RTE FLOW.
Extend testpmd CLI to include the fields of ident and sequence number.
One example:
flow create 0 ingress pattern eth / ipv4 /
icmp code is 1 ident is 5 seq is 6 /
end actions count / queue index 0 / end
The ICMP packet with code 1, identifier 5 and
sequence number 6 will be matched.
It will implement action counter and forward to queue 0.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A port can be closed in multiple situations:
- close command calling close_port() -> rte_eth_dev_close()
- exit calling close_port() -> rte_eth_dev_close()
- hotplug calling close_port() -> rte_eth_dev_close()
- hotplug calling detach_device() -> rte_dev_remove()
- port detach command, detach_device() -> rte_dev_remove()
- device detach command, detach_devargs() -> rte_eal_hotplug_remove()
The flow rules are flushed before each close.
It was already done in close_port(), detach_devargs() and
detach_port_device() which calls detach_device(),
but not in detach_device(). As a consequence, it was missing for siblings
of port detach command and unplugged device.
The check before calling port_flow_flush() is moved inside the function.
The state of the port to close is checked to be stopped.
As above, this check was missing in detach_device(),
impacting the cases of a multi-port device unplugged or detached
with the port detach command.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Since rte_eth_dev_release_port() is called on all port close operations,
the event RTE_ETH_EVENT_DESTROY can be reliably used for resetting
the port status on the application side.
The intermediate state RTE_PORT_HANDLING is removed in close_port()
because a port can also be closed by a PMD in a device remove operation.
In case multiple ports are closed, calling remove_invalid_ports()
only once is enough.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
The device operation .dev_close was returning void.
This driver interface is changed to return an int.
Note that the API rte_eth_dev_close() is still returning void,
although a deprecation notice is pending to change it as well.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Reviewed-by: Sachin Saxena <sachin.saxena@oss.nxp.com>
Reviewed-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Currently, the information of Rx/Tx queues from PMD driver is not
displayed exactly in the rxtx_config_display function. Because
"ports[pid].rx_conf" and "ports[pid].tx_conf" maintained in testpmd
application may be not the value actually used by PMD driver. For
instance, user does not set a field, but PMD driver has to use the
default value.
This patch fixes rxtx_config_display so that the information of Rx/Tx
queues can be really displayed for the PMD driver that implement
.rxq_info_get and .txq_info_get ops callback function.
Fixes: 75c530c1bd53 ("app/testpmd: fix port configuration print")
Fixes: d44f8a485f5d ("app/testpmd: enable per queue configure")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The number of desc is a per queue configuration. But in the check
function, nb_txd & nb_rxd are used to check whether the desc_id is
valid. nb_txd & nb_rxd are the global configuration of number of desc.
If the queue configuration is changed by cmdline liks: "port config xx
txq xx ring_size xxx", the real value will be changed.
This patch use the real value to check whether the desc_id is valid.
And if these are not configured by user. It will use the default value
to check it, since the rte_eth_rx_queue_setup & rte_eth_tx_queue_setup
will use a default value to configure the queue if nb_rx_desc or
nb_tx_desc is zero.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
