When the vhost-user frontend like Virtio-user tries to
reconnect to the restarted Vhost backend, the Vhost backend
segfaults when multiqueue is enabled.
This is caused by VHOST_USER_GET_VRING_BASE being called for
a virtqueue that has not been created before, causing a NULL
pointer dereferencing.
This patch adds the VHOST_USER_GET_VRING_BASE requests to
the list of requests that trigger queue pair allocations.
Fixes: 160cbc815b41 ("vhost: remove a hack on queue allocation")
Cc: stable@dpdk.org
Reported-by: Yinan Wang <yinan.wang@intel.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Fix the driver to report maximum MTU obtained from config if
VIRTIO_NET_F_MTU is supported or calculated based on maximum
Rx packet length.
Fixes: ad97ceece12c ("ethdev: add min/max MTU to device info")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Running with stdout suppressed or redirected for further processing
is very confusing in the case of errors. Fix it by logging errors and
warnings to stderr.
Since lines with log messages are touched anyway concatenate split
format strings to make it easier to search using grep.
Fix indent of format string arguments.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch removes most uses of the global variable rte_eth_devices
from testpmd. This was done to avoid using the object directly which
applications should not do.
Most uses have been replaced with standard function calls, however
the use of it in the show_macs function could not be replaced as no
function call exists to get all mac addresses of a given port.
Signed-off-by: Paulis Gributs <paulis.gributs@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
MAC address of each port in global variable ports hasn't been updated
after resetting. It was the initial one after resetting VF MAC address.
This patch gets correct port MAC address when starting port.
Fixes: a5279d25616d ("app/testpmd: check status of getting MAC address")
Cc: stable@dpdk.org
Signed-off-by: Yuying Zhang <yuying.zhang@intel.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Command help string is missing 'reset' keyword,
although description has it. Adding it.
Fixes: 97f1e196799f ("app/testpmd: add port reset command")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Currently, rte_sched_free_memory() is called multiple times by the
exception handling code in rte_sched_subport_config() and
rte_sched_pipe_config().
This patch optimizes them into a unified outlet to free memory.
Fixes: ac6fcb841b0f ("sched: update subport rate dynamically")
Fixes: 34a90f86657c ("sched: modify pipe functions for config flexibility")
Fixes: ce7c4fd7c2ac ("sched: add pipe config to subport level")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes return value judgment when allocate memory to store the
subport profile, and releases memory of 'rte_sched_port' if code fails to
apply for this memory.
Fixes: 0ea4c6afcaf1 ("sched: add subport profile table")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The freqs array size is RTE_MAX_LCORE_FREQS. Before filling the
array with num_freqs elements, restrict the total num to
RTE_MAX_LCORE_FREQS. This fix aims to fix the coverity scan issue
like:
Overrunning array "pi->freqs" of 256 bytes by passing it to a
function which accesses it at byte offset 464.
Coverity issue: 371913
Fixes: ef1cc88f1837 ("power: support cppc_cpufreq driver")
Cc: stable@dpdk.org
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Acked-by: David Hunt <david.hunt@intel.com>
The first argument to rte_bsf32_safe was incorrectly declared as
a 64 bit value. The code only works on 32 bit values and the underlying
function rte_bsf32 only accepts 32 bit values. This was a mistake
introduced when the safe version was added and probably cause
by copy/paste from the 64 bit version.
The bug passed silently under the radar until some other code was
built with -Wall and -Wextra in C++ and C++ complains about the
missing cast.
Yes, this is a API signature change, but the original code was wrong.
It is an inline so not an ABI change.
Fixes: 4e261f551986 ("eal: add 64-bit bsf and 32-bit safe bsf functions")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Errors detected during parsing of pattern items and actions
are reflected by setting RTE error, but the name of the bad
element is not disclosed, thus leaving the user to join the
dots themselves. Adjust the code to log missing information.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Extra log statements will provide more details to the user
in the case of errors discovered in the pattern or actions.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Rx/Tx doorbells statistics are collected in software and
available per queue. These stats are useful for performance
investigation.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Move getting MAC stats code that involves locking to separate functions
to simplify addition of new xstats.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
There is no point to recalculate number of available xstats on
each request. The number is calculated once on device start
and may be returned on subsequent calls.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Return the latest stats snapshot in stopped state
instead of returning an error.
Fixes: 1caab2f1e68 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Device may support only some MAC stats. Add mapping from ids to subset
of supported MAC stats for each port.
Fixes: 73280c1e4ff ("net/sfc: support xstats retrieval by ID")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Fix xstats by ID callbacks according to ethdev usage.
Handle combinations of input arguments that are required by ethdev
and sanity check and reject other combinations on callback entry.
Fixes: 73280c1e4ff ("net/sfc: support xstats retrieval by ID")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Update MAC stats function reads adapter state with MAC stats locking
but without adapter locking. Add adapter locking before calling this
function and remove MAC stats locking since there's no point to have
it together with adapter locking. The second place MAC stats locking
is used is MAC stats reset function. It's called with adapter being
already locked so there's no point to use MAC stats locking anymore.
Fixes: 1caab2f1e68 ("net/sfc: add basic statistics")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Add MAC stats lock in xstats_get_by_id() callback before reading
number of supported MAC stats.
Fixes: 73280c1e4ff ("net/sfc: support xstats retrieval by ID")
Cc: stable@dpdk.org
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
When the guest memory is hotplugged, the vhost application which
enables DMA acceleration must stop DMA transfers before the vhost
re-maps the guest memory.
To accomplish that, we need to do these changes in the vhost sample:
1. add inflight packets count.
2. add vring_state_changed() callback.
3. add inflight packets clear process in destroy_device() and
vring_state_changed().
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When the guest memory is hotplugged, the vhost application which
enables DMA acceleration must stop DMA transfers before the vhost
re-maps the guest memory.
This patch is to notify the vhost application of stopping DMA
transfers.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Applications need to stop DMA transfers and finish all the inflight
packets when in VM memory hot-plug case and async vhost is used. This
patch is to provide an unsafe API to clear inflight packets which
are submitted to DMA engine in vhost async data path. Update the
program guide and release notes for virtqueue inflight packets clear
API in vhost lib.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The async vhost callback ops should return negative value when there
are something wrong in the callback, so the return type should be
changed into int32_t. The issue in vhost example is also fixed.
Fixes: cd6760da1076 ("vhost: introduce async enqueue for split ring")
Fixes: 819a71685826 ("vhost: fix async callback return type")
Fixes: 6b3c81db8bb7 ("vhost: simplify async copy completion")
Fixes: abec60e7115d ("examples/vhost: support vhost async data path")
Fixes: 6e9a9d2a02ae ("examples/vhost: fix ioat dependency")
Fixes: 873e8dad6f49 ("vhost: support packed ring in async datapath")
Cc: stable@dpdk.org
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The prerequisite info is already present in the platform guide.
No need to repeat it in individual dev guides.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds validation of the port id for
rte_pmd_dpaa2_set_custom_hash API to check if the
port is a valid DPAA2 port. Also handles some
edge cases in the rte_pmd_dpaa2_mux_flow_create API.
Signed-off-by: Vanshika Shukla <vanshika.shukla@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
DPAA2 hardware require a hardware portal context.
If a thread doing DPAA2 i/o do not have portal, it will
allocate it on run-time. This may cause a delay in the
datapath at run-time. To avoid it, it is better to allocate
a hw context portal at the start of thread expected to do
i/o with DPAA2 hardware.
This patch makes necessary changes for the same and creates
a pmd API to allocate a hw context portal for a thread.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Add check for the PCD queue from the kernel interface
for default and error queues.
Signed-off-by: Rohit Raj <rohit.raj@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reuse DPDK rte_gettid instead of syscall.
It will help to reduce the dpaa portal allocation time.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch fixes providing the correct headroom size when
VSP is enabled.
Fixes: e4abd4ff183c ("net/dpaa: support virtual storage profile")
Cc: stable@dpdk.org
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
if was allocated with rte_malloc, free shall be equivalent.
Fixes: 4762b3d419c3 ("bus/dpaa: delay fman device list to bus probe")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Remove Guy Tzalik as the driver's maintainer and add Shai Brandes who
will now be another maintainer of the ENA DPDK driver.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
This version update contains:
* Rx interrupts feature,
* Support for the RSS hash function reconfiguration,
* Small rework of the works,
* Reset trigger on Tx path fix.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Allow user to specify his own hash key and hash ctrl if the
device is supporting that. HW interprets the key in reverse byte order,
so the PMD reorders the key before passing it to the ena_com layer.
Default key is being set in random matter each time the device is being
initialized.
Moreover, make minor adjustments for reta size setting in terms
of returning error values.
RSS code was moved to ena_rss.c file to improve readability.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
Reviewed-by: Amit Bernstein <amitbern@amazon.com>
In order to support asynchronous Rx in the applications, the driver has
to configure the event file descriptors and configure the HW.
This patch configures appropriate data structures for the rte_ethdev
layer, adds .rx_queue_intr_enable and .rx_queue_intr_disable API
handlers, and configures IO queues to work in the interrupt mode, if it
was requested by the application.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Artur Rojek <ar@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
If the prepare function failed, then it means the descriptors are in the
invalid state.
This condition now triggers the reset, which should be further handled
by the application.
To notify the application about prepare function failure, the error log
was added. In general, it should never fail in normal conditions, as the
Tx function checks for the available space in the Tx ring before the
preparation even starts.
Fixes: 2081d5e2e92d ("net/ena: add reset routine")
Cc: stable@dpdk.org
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Reviewed-by: Shay Agroskin <shayagr@amazon.com>
ENA defined its own logger flags for Tx and Rx, but they weren't
technically used anywhere. Those data path loggers weren't used anywhere
after the definition.
This commit uses the generic RTE_ETHDEV_DEBUG_RX and RTE_ETHDEV_DEBUG_TX
flags to define PMD_TX_LOG and PMD_RX_LOG which are now being used on
the data path. The PMD_TX_FREE_LOG was removed, as it has no usage in
the current version of the driver.
RTE_ETH_DEBUG_[TR]X now wraps extra checks for the driver state in the
IO path - this saves extra conditionals on the hot path.
ena_com logger is no longer optional (previously it had to be explicitly
enabled by defining this flag: RTE_LIBRTE_ENA_COM_DEBUG). Having this
logger optional makes tracing of ena_com errors much harder.
Due to ena_com design, it's impossible to separate IO path logs
from the management path logs, so for now they will be always enabled.
Default levels for the affected loggers were modified. Hot path loggers
are initialized with the default level of DEBUG instead of NOTICE, as
they have to be explicitly enabled. ena_com logging level was reduced
from NOTICE to WARNING - as it's no longer optional, the driver should
report just a warnings in the ena_com layer.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
ENA logs were not consistent regarding the new line character. Few of
them were relying on the new line character added by the PMD_*_LOG
macros, but most were adding the new line character by themselves. It
was causing ENA logs to add extra empty line after almost each log.
To unify this behavior, the missing new line characters were added to
the driver logs, and they were removed from the logging macros. After
this patch, every ENA log message should add '\n' at the end.
Moreover, the logging messages were adjusted in terms of wording
(removed unnecessary abbreviations), capitalizing of the words (start
sentences with capital letters, and use 'Tx/Rx' instead of 'tx/TX' etc.
Some of the logs were rephrased to make them more clear for the reader.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Fix the function call error on VLAN filter table address setting for VF.
Fixes: aa1ae7941e71 ("net/txgbe: support VF VLAN")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
The configuration of MTU is inconsistent in the driver and
firmware when the port is stopped, started and reconfigured.
Before, HINIC_MAX_JUMBO_FRAME_SIZE include VLAN tag, but when
frame and pktlen are converted to each other do not include
VLAN tag. And port_mtu_set function will use HINIC_MAX_JUMBO_FRAME_SIZE
to calculate eth_overhead, so MTU will be inconsistent in the driver and
firmware.
Fixes: e542ab51ab27 ("net/hinic: fix jumbo frame flag condition for MTU set")
Cc: stable@dpdk.org
Signed-off-by: Guoyang Zhou <zhouguoyang@huawei.com>
The Rx queue must config as ceq disables, and must set MSI-X
state disabled. Otherwise when LRO is enables, there will be
problems with packet aggregation because of firmware.
Fixes: 9d02f40d6503 ("net/hinic: fix LRO")
Cc: stable@dpdk.org
Signed-off-by: Guoyang Zhou <zhouguoyang@huawei.com>
If the VLAN id 0 is deleted for hinic, all packets without
VLAN will be discarded when the VLAN filter is turned on.
Fixes: 50ce3e7aec8f ("ethdev: fix VLAN offloads set if no relative capabilities")
Cc: stable@dpdk.org
Signed-off-by: Guoyang Zhou <zhouguoyang@huawei.com>
If "dcb_capability_en" in "data->dev_conf" delivered from the dev_configure
does not have the ETH_DCB_PFC_SUPPORT flag, the user wants to disable PFC,
and only enable ETS. Therefore, this patch supports the function of
disabling PFC by the field. In addition, this patch updates
"current_fc_status" of the driver based on the flow control mode requested
by user so as to enable the flow control mode in multi-TC scenarios.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
In some special scenarios, such as TSO scenarios, the user layer may need
to call the tx_pkt_prepare(), and then call tx_pkt_burst() to send packets.
If the return value of tx_pkt_parepare() isn't equal to the numbers of
packets requested to send, warning message may be printed at the user
layer. Currently, tx_pkt_prepare() is assigned to dummy function when
dev_stop() is called in hns3 PMD. At this moment, if user layer continues
to send packets, the warning message will always be printed. So this patch
modifies the address to NULL.
Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, hns3 driver saves rte_flow list into the
rte_eth_dev.process_private field, it may cause following problem:
The FDIR/RSS rules cannot be managed in a unified manner because
the management structure is not visible between processes.
This patch fixes it by moving rte_flow list to struct hns3_hw which is
visible between processes.
Fixes: fcba820d9b9e ("net/hns3: support flow director")
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
PF driver prints a warning on device that does not support auto-negotiation
when user does not configure "link_speeds" (default 0), which means
auto-negotiation. Currently, this warning information is printed in
dev_configure stage and a success is returned. Perhaps the user may call
dev_configure multiple times before dev_start for some reason or purpose.
In this case, this message may be printed multiple times. So this patch
moves it to dev_start stage.
Fixes: cfc9fe48c4d4 ("net/hns3: move link speeds check to configure")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, the PF/VF does not clear the interrupt source immediately
after receiving the interrupt. As a result, if the second interrupt
task is triggered when processing the first interrupt task, clearing
the interrupt source before exiting will clear the interrupt sources
of the two tasks at the same time. As a result, no interrupt is
triggered for the second task.
Clearing interrupt source immediately after checking event cause
ensures that:
1. Even if two interrupt tasks are triggered at the same time, they can
be processed.
2. If the second task is triggered during the processing of the first
task and the interrupt source is not cleared, the interrupt is reported
after vector0 is enabled.
Fixes: a5475d61fa34 ("net/hns3: support VF")
Fixes: 3988ab0eee52 ("net/hns3: add abnormal interrupt process")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch fixed incorrect comment of hns3_parse_fdir_filter().
Fixes: fcba820d9b9e ("net/hns3: support flow director")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
