Migration to argparse was incomplete.
$ dpdk-pmdinfo.py -p $(which dpdk-testpmd)
Traceback (most recent call last):
File "/usr/bin/dpdk-pmdinfo.py", line 626, in <module>
main()
File "/usr/bin/dpdk-pmdinfo.py", line 596, in main
exit(scan_for_autoload_pmds(args[0]))
TypeError: 'Namespace' object does not support indexing
Fixes: 81255f27c6 ("usertools: replace optparse with argparse")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Robin Jarry <robin.jarry@6wind.com>
When mempool had been created with RTE_MEMPOOL_F_NO_IOVA_CONTIG flag
but later populated with valid IOVA, RTE_MEMPOOL_F_NON_IO was unset,
while it should be kept. The unit test did not catch this
because rte_mempool_populate_default() it used was populating
with RTE_BAD_IOVA.
Keep setting RTE_MEMPOOL_NON_IO at an empty mempool creation
and add an assert for it in the unit test (remove the separate case).
Do not reset the flag if RTE_MEMPOOL_F_ON_IOVA_CONTIG is set.
Fixes: 11541c5c81 ("mempool: add non-IO flag")
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
As suse version numbering is inconsistent to determine Linux kernel
API to be used. In this patch we check parameter of 'ndo_tx_timeout'
API directly from the kernel source. This is done only for suse build.
Bugzilla ID: 812
Cc: stable@dpdk.org
Signed-off-by: Aman Singh <aman.deep.singh@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Longfeng Liang <longfengx.liang@intel.com>
This API was introduced in 18.05, therefore removing
experimental tag to promote it to stable state
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Enable restricting the scope of an action to regular table entries or
to the table default entry in order to support the P4 language
tableonly or defaultonly annotations.
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add support for configurable number of loops through the input PCAP
file for the source port. Added an additional parameter to source
port CLI command.
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The instruction_data array was incorrectly indexed, which resulted in
the array index getting out of bounds and sometimes segfault.
Fixes: a1711f (“pipeline: add SWX Rx and extract instructions“)
Cc: stable@dpdk.org
Signed-off-by: Yogesh Jangra <yogesh.jangra@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In layer argument test function, kvargs are parsed and checked without
free. This patch calls rte_kvargs_free() function to avoid memory leak.
Coverity issue: 373631
Fixes: a4975cd20d ("test: add devargs test cases")
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Build is broken on RHEL7 following introduction of this new protocol.
Fixes: 3a929df1f2 ("ethdev: support L2TPv2 and PPP procotol")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Raslan Darawsheh <rasland@nvidia.com>
Fix the mbuf offload flags namespace by adding an RTE_ prefix to the
name. The old flags remain usable, but a deprecation warning is issued
at compilation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
The mbuf offload flags do not match the DPDK namespace (they are not
prefixed by RTE_). This coccinelle script is used in the next commit to
do the replacement in the code.
A draft script was initially submitted [1] in commit d7595795b7 ("doc:
announce renaming of mbuf offload flags"), but dropped by mistake at
commit.
1: http://inbox.dpdk.org/dev/20210730155700.32574-1-olivier.matz@6wind.com
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The flags PKT_TX_VLAN_PKT and PKT_TX_QINQ_PKT are
marked as deprecated since commit 380a7aab1a ("mbuf: rename deprecated
VLAN flags") (2017). But they were not using the RTE_DEPRECATED
macro, because it did not exist at this time. Add it, and replace
usage of these flags.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The flags PKT_RX_L4_CKSUM_BAD and PKT_RX_IP_CKSUM_BAD are defined
twice with the same value. Remove one of the occurrence, which was
marked as "deprecated".
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Currently compress, decompress and dma are allowed
only when all 3 capabilities are on.
A case where the user wants decompress offload, if
decompress capability is on but one of compress,
dma is off, is not allowed.
Split compress/decompress/dma support check to allow
partial transformations.
Signed-off-by: Raja Zidane <rzidane@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Use CPT LF queue depth as power of 2 to aid in masked checks for pending
queue.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Set correct tunnel type telemetry text - tunnel type
was wrongly set as IPv4-UDP for all types.
Fixes: bf5b65a8e781 ("ipsec: support SA telemetry")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The device specific structures - rte_cryptodev
and rte_cryptodev_data are moved to cryptodev_pmd.h
to hide it from the applications.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Rework fast-path cryptodev functions to use rte_crypto_fp_ops[].
While it is an API/ABI breakage, this change is intended to be
transparent for both users (no changes in user app is required) and
PMD developers (no changes in PMD is required).
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Invoke event_dev_probing_finish() function at the end of probing,
this function sets the function pointers in the fp_ops flat array
in case of secondary process.
For primary process, fp_ops is updated in rte_cryptodev_start().
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Added a rte_cryptodev_pmd_probing_finish API which
need to be called by the PMD after the device is initialized
completely. This will set the fast path function pointers
in the flat array for secondary process. For primary process,
these are set in rte_cryptodev_start.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
The worker PMDs were using direct device start/stop
functions rather than rte_cryptodev_start(),
so rte_crypto_fp_ops never get set. This patch calls
the rte_cryptodev_start and stop APIs which start and
stop devices properly and fp_ops get set.
Reported-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Move fastpath inline function pointers from rte_cryptodev into a
separate structure accessed via a flat array.
The intention is to make rte_cryptodev and related structures private
to avoid future API/ABI breakages.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
At queue_pair config stage, allocate memory for maximum
number of queue pair pointers that a device can support.
This will allow fast path APIs(enqueue_burst/dequeue_burst) to
refer pointer to internal QP data without checking for currently
configured QPs.
This is required to hide the rte_cryptodev and rte_cryptodev_data
structure from user.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A new header file rte_cryptodev_core.h is added and all
internal data structures which need not be exposed directly to
application are moved to this file. These structures are mostly
used by drivers, but they need to be in the public header file
as they are accessed by datapath inline functions for
performance reasons.
Signed-off-by: Akhil Goyal <gakhil@marvell.com>
Tested-by: Rebecca Troy <rebecca.troy@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
An autotest is added for the new chacha20_poly1305 PMD.
A new test case is also added for SGL test.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add in new chacha20_poly1305 PMD to the ipsec_mb framework.
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/zuc folder and gathers all zuc PMD
implementation specific details into two files,
pmd_zuc.c and pmd_zuc_priv.h in the crypto/ipsec_mb folder.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch enables out-of-place auth-cipher operations where
digest should be encrypted along with the rest of raw data.
It also adds support for partially encrypted digest when using
auth-cipher operations.
Signed-off-by: Damian Nowak <damianx.nowak@intel.com>
Signed-off-by: Kai Ji <kai.ji@intel.com>
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/snow3g folder and gathers all snow3g PMD
implementation specific details into a single file,
pmd_snow3g.c in the crypto/ipsec_mb folder.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/kasumi folder and gathers all kasumi PMD
implementation specific details into a single file,
pmd_kasumi.c in the crypto/ipsec_mb folder.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/aesni_gcm folder and gathers all
aesni-gcm PMD implementation specific details into a single file,
pmd_aesni_gcm.c in the crypto/ipsec_mb folder.
A redundant check for iv length is removed.
GCM ops are stored in the queue pair for multi process support, they
are updated during queue pair setup for both primary and secondary
processes.
GCM ops are also set per lcore for the CPU crypto mode.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add extra ZUC-EIA3-256 and ZUC-EEA3-256 test vectors.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Check for auth parameters in the transform to verify if a test case is
supported by the crypto device under test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Check for cipher parameters in the transform to verify if a test case
is supported by the crypto device under test.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add support for ZUC-EEA3-256 and ZUC-EIA3-256.
Only 4-byte tags supported for now.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch removes the crypto/aesni_mb folder and gathers all
aesni-mb PMD implementation specific details into a single file,
pmd_aesni_mb.c in crypto/ipsec_mb.
Now that intel-ipsec-mb v1.0 is the minimum supported version, old
macros can be replaced with the newer macros supported by this version.
Signed-off-by: Piotr Bronowski <piotrx.bronowski@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The ipsec_mb SW PMD now has multiprocess support.
The queue-pair IMB_MGR is stored in a memzone instead of being allocated
externally by the Intel IPSec MB library, when v1.1 is used.
If v1.0 is used, multi process is not supported, and allocation is
done as before.
The secondary process needs to reconfigure the queue-pair to allow for
IMB_MGR function pointers be updated.
Intel IPsec MB library version 1.1 is required for this support.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch introduces the new framework to share common code between
the SW crypto PMDs that depend on the intel-ipsec-mb library.
This change helps to reduce future effort on the code maintenance and
feature updates.
The PMDs that will be added to this framework in subsequent patches are:
- AESNI MB
- AESNI GCM
- CHACHA20_POLY1305
- KASUMI
- SNOW3G
- ZUC
The use of these PMDs will not change, they will still be supported for
x86, and will use the same EAL args as before.
The minimum required version for the intel-ipsec-mb library is now v1.0.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The macros RTE_BIT32 and RTE_BIT64 are used to replace single bit masks.
Do not switch VLAN offload flags since type is not fixed size.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add 'RTE_ETH' namespace to all enums & macros in a backward compatible
way. The macros for backward compatibility can be removed in next LTS.
Also updated some struct names to have 'rte_eth' prefix.
All internal components switched to using new names.
Syntax fixed on lines that this patch touches.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Chenbo Xia <chenbo.xia@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
link bounding auto-test internally creates emulated ethdev.
Some tests change Rx/Tx functions of this emulated device on the fly:
by directly modifying rte_eth_dev fields and without doing stop/start
for these devices.
As now ethdev uses rte_eth_fp_ops[] for fast-path functions, these
direct changes doesn't make expected effect.
Fix the problem by guarding fast-path functions changes with
rte_eth_dev_stop()/rte_eth_dev_start().
Fixes: 7a0935239b ("ethdev: make fast-path functions to use new flat array")
Reported-by: Lewei Yang <leweix.yang@intel.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
After DEV_RX_OFFLOAD_JUMBO_FRAME flag removed, drivers give jumbo frame
decisions based on MTU value checks, but some of the checks were wrong
by mistake, causing device initialization to fail, fixing them.
Fixes: b563c14212 ("ethdev: remove jumbo offload flag")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
Jumbo offload is no more announced as capability, and
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag is removed.
This patch is also removing 'Jumbo frame' feature from documentation.
Fixes: b563c14212 ("ethdev: remove jumbo offload flag")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Commit 1bb4a528c4 ("ethdev: fix max Rx packet length") clarified the
expected usage of the max_rx_pktlen and max_mtu values and implemented
some extra checks on these values to ensure they are sane. After this,
the AF_XDP PMD fails to initialise. The value for max_rx_pktlen which
represents the max size of the Ethernet frame was set to ETH_FRAME_LEN
(1514) and the max_mtu which represents the size of the payload was set
to the max size of the Ethernet frame. This did not make sense, as
naturally the maximum frame size should be greater than the payload
size.
Fix this by setting the max_rx_pktlen equal to the max size of the
Ethernet frame as expected, and the max MTU equal to the max_rx_pktlen
less the overhead which is set to the size of an Ethernet header plus
CRC.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_configure() always sets MTU to either dev_conf.rxmode.mtu
or RTE_ETHER_MTU if application doesn't provide the value.
So, there is no point to allow rte_eth_dev_set_mtu() before since
set value will be overwritten on configure anyway.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
RX/TX functions (rte_eth_rx_burst/rte_eth_tx_burst) get 'nb_pkts'
argument, which specifies the maximum number to receive/transmit.
It can be 0..nb_pkts, meaning nb_pkts+1 options.
Testpmd can provide statistics of the burst sizes ('set
record-burst-stats on') by incrementing an array cell of index
<burst-size>. This array is mistakenly [MAX_PKT_BURST] size. Receiving
the maximum burst will cause out of bound write.
Enlarge the spread stats array by one cell to fix it.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Eli Britstein <elibr@nvidia.com>
Reviewed-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
