This option both sets the maximum number of segments for Rx/Tx packets and
whether scattered mode is supported at all. This commit removes the latter
as well as configuration file exposure since the most appropriate value
should be decided at run-time.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Current implementation is partial (Tx only), not convenient to use and
not of primary concern.
Remove this feature before refactoring the PMD.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Copyright lasts long enough not to require notices to be updated yearly.
The current approach of updating them occasionally while working on
unrelated tasks should be deprecated in favor of dedicated commits updating
all files at once when necessary.
Standardize on a single year per copyright owner.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds link to the DPDK i40e doc,
which is how to upgrade firmware guide for users.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Support for the feature is added to EFX Tx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support for the feature is added to EFX Rx datapath
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Support MTU change in the range ETHER_MIN_MTU to PF_MTU. A drop in PF
MTU lowers VF MTU if it goes out of range.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Secondary process is a copy/paste of the mlx4 drivers, it was never
tested and it even segfault at the secondary process start in the
mlx5_pci_probe().
This makes more sense to wipe this non working feature to re-write a
working and functional version.
Fixes: a48deada651b ("mlx5: allow operation in secondary processes")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
These PMDs must be versioned because they have an API.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
The patch simplifies DPDK applications analysis for developers which use
Intel® VTune Amplifier.
The empty cycles are such iterations that yielded no RX packets. As far as
DPDK is running in poll mode, wasting cycles is equal to wasting CPU time.
Tracing such iterations can identify that device is underutilized. Tracing
empty cycles becomes even more critical if a system uses a lot of Ethernet
ports.
The patch gives possibility to analyze empty cycles without changing
application code. All needs to be done is just to reconfigure and rebuild
the DPDK itself with CONFIG_RTE_ETHDEV_PROFILE_ITT_WASTED_RX_ITERATIONS
enbled. The important thing here is that this does not affect DPDK code.
The profiling code is not being compiled if user does not specify config
flag.
The patch provides common way to inject RX queues profiling and VTune
specific implementation.
Signed-off-by: Ilia Kurakin <ilia.kurakin@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add a section on the service cores API changes to 17.11 release notes.
Suggested-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This commit fixes an issue in the service runner function,
where the atomic value was not cleared on exiting the service
function. This resulted in future attempts to run the service
to appear like the function was running, however it was in
reality deadlocked.
This commit refactors the atomic handling to be more readable,
by splitting the implementation code into a new static inline
function. The remaining flow control of atomics in the existing
function is refactored for readability.
Fixes: 21698354c832 ("service: introduce service cores concept")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
This patch adds a new eth_dev layer API function rte_eth_dev_reset(),
which a DPDK application can call to reset a NIC and keep its port id
afterwards. It means that all software resources allocated in the ethdev
layer are kept, and software & hardware resources of the NIC within the
NIC's PMD are reset to a state simular to that obtained by calling the
PCI dev_uninit() and then dev_init(). This effective sequence of
dev_uninit() and dev_init() is packed into a single API function
rte_eth_dev_reset().
Please see the comments before the declaration of rte_eht_dev_reset()
in lib/librte_ether/rte_ethdev.h to get more details on why this
function is needed, what it does, when it should be called
and what an application should do after calling this function.
See also detailed explanations in the programmer's guide.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Reviewed-by: Remy Horton <remy.horton@intel.com>
Add template release notes for DPDK 17.11 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Bumping the library version to reflect the ABI change, where
rte_event_pmd_pci_probe(), rte_event_pmd_pci_remove(),
rte_event_pmd_vdev_init(), rte_event_pmd_vdev_uninit()
functions removed from the library.
Fixes: b1b3d9f90502 ("eventdev: make vdev init and uninit functions optional")
Fixes: 9a8269d56942 ("eventdev: make PCI probe and remove functions optional")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
librte_eventdev.so.1 was introduced in v17.05, and it missed to
update in release_17_05 release notes.
Fixes: 222555480a7f9 ("version: 17.05.0")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
rte_cryptodev_allocate_driver() function gets one parameter
(rte_driver), as the cryptodev_driver structure is
allocated inside the function with rte_malloc.
This function is called from a constructor function,
when crypto PMDs are registered.
If malloc fails, there is no way to recover from it,
so it is better to allocate this structure
statically, in each PMD.
Therefore, it is required to add an extra parameter in
this function, to also get a pointer to this structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
In order to remove all dependencies on vdev for cryptodev,
the implementation of rte_cryptodev_vdev_pmd_init() function
needs to be moved to rte_cryptodev_vdev.h, and all crypto
vdevs will include it, and therefore, this function will
be removed as a public API.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Support for security operations is planned to be added
in ethdev and cryptodev for the 17.11 release.
For this following changes are required.
- rte_cryptodev and rte_eth_dev structures need to be added
new parameter rte_security_ops which extend support for
security ops to the corresponding driver.
- rte_cryptodev_info and rte_ethd_dev_info need to be added
with rte_security_capabilities to identify the capabilities of
the corresponding driver.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Boris Pismenny <borisp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
VMBUS support will use GUID in eth_dev_data name field which requires
at least 37 characters. Plan for increase in size now.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This is an API/ABI change notice for DPDK 17.11 announcing the redefinition
of port_id. port_id is currently defined as uint8_t, which is limited to
the range 0 to 255. A larger range is required for vdev scalability.
It is necessary for a redefinition of port_id to extend it from 1 bytes to
2 bytes. All ethdev APIs and usages related to port_id will be changed at
the same time.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The flag RTE_ETH_DEV_DETACHABLE will disappear.
This flag is not needed anymore following the hotplug work done for
v17.08. It can be removed, its function is now implicitly made available
by the relevant EAL and rte_bus implementations.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
An API/ABI change is planned for 17.11 to change following
* Remove unused flag param from rte_mempool_generic_get and _put.
* Change data type for mempool 'flag' from int to unsigned int.
Refer [1].
* Add struct rte_mempool * param into func rte_mempool_xmem_size,
rte_mempool_xmem_usage to make it mempool aware.
Refer [2].
[1] http://dpdk.org/dev/patchwork/patch/25603/
[2] http://dpdk.org/dev/patchwork/patch/25605/
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When we run DPDK on guest or VFIO mode on host,
the dpdk library or device will not be directly accessing
the physical address. Instead, the device does go through
an IO address translation memory management unit. On x86,
we call it as IOMMU and on ARM as SMMU.
More details:
http://osidays.com/osidays/wp-content/uploads/2014/12/Final_OSI2014_IOMMU_DetailedView_Sanil_Anurup.pdf
Based on discussion in the following thread
http://dpdk.org/ml/archives/dev/2017-July/070850.html
We would like to change reference to physical address to more
appropriate name as with IOMMU/SMMU with
the device won't be dealing directly with the physical address.
An ABI change is planned for 17.11 to change following
data structure or functions to more appropriate name.
Currently planned to change it iova as instead of phys
Please note: The change will be only for the name and
functional aspects of the API will remain same.
Following functions/data structures name may change.
This list is based on v17.05-rc1. It may change based on v17.11 code base.
typedef:
phys_addr_t
structures:
struct rte_memseg::phys_addr
struct rte_mbuf::buf_physaddr
functions:
rte_mempool_populate_phys()
rte_mempool_populate_phys_tab()
rte_eal_using_phys_addrs()
rte_mem_virt2phy()
rte_dump_physmem_layout()
rte_eal_get_physmem_layout()
rte_eal_get_physmem_size()
rte_malloc_virt2phy()
rte_mem_phy2mch()
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Following the calls on the mailing list:
http://dpdk.org/ml/archives/dev/2017-June/068151.html
The Technical Board decided to drop Xen dom0 support from EAL:
http://dpdk.org/ml/archives/dev/2017-June/068615.html
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The vdev subsystem is a driver,
and the struct rte_pci_driver is not used anymore
in generic driver interfaces.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The replacement function rte_log_get_level() has just been implemented
in 17.08. Better to postpone the removal of legacy functions to 17.11.
Fixes: 4f0981e6ec6c ("eal: deprecate log functions")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add prog_guide doc to explain the design of the GRO library.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Existing qede PMD code already supports NPAR feature.
So adding this in "Supported Features" section after testing it with
latest DPDK.
Also, add myself to the list of maintainers of qede PMD
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Rasesh Mody <rasesh.mody@cavium.com>
Hugepages are just that, hugepages. The TLB is a sort of cache for doing
address translation and does not need to be referenced in the title, since
"TLB hugepages" doesn't make any sense (as there are no non-TLB hugepages
that you can allocate).
Fixes: 6e718ae062d0 ("doc: release notes 1.7")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since modern kernels don't allow unprivileged processes to read the
pagemaps file, the instructions on running as non-root are out-of-date. Add
a note clarifying that they will only work with earlier kernel versions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Document NIC features, add more information about them and add more
implementation related support.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The original purpose of this deprecation is to make sure PCI devices
are reset whenever DPDK apps crash.
Since the commit b58eedfc7dd5 from Shijith can fix this problem without
deprecating anything, now there is no need to deprecate iomem and ioport
mapping in igb_uio.
Fixes: 3bac1dbc1ed5 ("doc: announce iomem and ioport removal from igb_uio")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
It is very difficult to list OS which are really supported.
Instead of continuing this unrealistic effort, a more reliable list
of tested platforms and OS is updated in the release notes.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
