Merge all versions in linker version script files to DPDK_20.0.
This commit was generated by running the following command:
:~/DPDK$ buildtools/update-abi.sh 20.0
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Since the library versioning for both stable and experimental ABI's is
now managed globally, the LIBABIVER and version variables no longer
serve any useful purpose, and can be removed.
The replacement in Makefiles was done using the following regex:
^(#.*\n)?LIBABIVER\s*:=\s*\d+\n(\s*\n)?
(LIBABIVER := numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
The replacement for meson files was done using the following regex:
^(#.*\n)?version\s*=\s*\d+\n(\s*\n)?
(version = numbers, optionally preceded by a comment and optionally
succeeded by an empty line)
[David]: those variables are manually removed for the files:
- drivers/common/qat/Makefile
- lib/librte_eal/meson.build
[David]: the LIBABIVER is restored for the external ethtool example
library.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Currently, mempool will check if IOVA is bad for a segment, and reject
the IOVA if hugepages are also enabled. This check is wrong because now
that we have external memory segments, they are allowed to have their
IOVA's to be invalid. This check also doesn't make much sense in the
first place, because the following code can handle bad IOVA's perfectly
well (and in fact, this check is not triggering a failure when
--no-huge option is enabled), so there is not much sense to check for
this in the first place.
Fixes: 950e8fb4e194 ("mem: allow registering external memory areas")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Bo Chen <box.c.chen@intel.com>
Currently, when mempool is being populated, we get IOVA address
of every segment using rte_mem_virt2iova(). This works for internal
memory, but does not really work for external memory, and does not
work on platforms which return RTE_BAD_IOVA as a result of this
call (such as FreeBSD). Moreover, even when it works, the function
in question will do unnecessary pagewalks in IOVA as PA mode, as
it falls back to rte_mem_virt2phy() instead of just doing a lookup in
internal memseg table.
To fix it, replace the call to first attempt to look through the
internal memseg table (this takes care of internal and external memory),
and fall back to rte_mem_virt2iova() when unable to perform VA->IOVA
translation via memseg table.
Fixes: 66cc45e293ed ("mem: replace memseg with memseg lists")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Bo Chen <box.c.chen@intel.com>
For consistency, RTE_MEMPOOL_ALIGN should be used in place of
RTE_CACHE_LINE_SIZE. They have the same value, because the only arch
that was defining a specific value for it has been removed from DPDK.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
When populating a mempool, ensure that objects are not located across
several pages, except if user did not request IOVA-contiguous objects.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Introduce new functions that can used by mempool drivers to
calculate required memory size and to populate mempool.
For now, these helpers just replace the *_default() functions
without change. They will be enhanced in next commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
In rte_mempool_populate_default(), we determine the page size,
which is needed for calc_size and allocation of memory.
Move this in a function and export it, it will be used in a next
commit.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
The previous commit reduced the amount of required memory when
populating the mempool with non IOVA-contiguous memory.
Since there is no big advantage to have a fully iova-contiguous mempool
if it is not explicitly asked, remove this code, it simplifies the
populate function.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
The size returned by rte_mempool_op_calc_mem_size_default() is aligned
to the specified page size. Therefore, with big pages, the returned size
can be much more that what we really need to populate the mempool.
For instance, populating a mempool that requires 1.1GB of memory with
1GB hugepages can result in allocating 2GB of memory.
This problem is hidden most of the time due to the allocation method of
rte_mempool_populate_default(): when try_iova_contig_mempool=true, it
first tries to allocate an iova contiguous area, without the alignment
constraint. If it fails, it fallbacks to an aligned allocation that does
not require to be iova-contiguous. This can also fallback into several
smaller aligned allocations.
This commit changes rte_mempool_op_calc_mem_size_default() to relax the
alignment constraint to a cache line and to return a smaller size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
rte_mempool_populate_virt() currently requires that both addr
and length are page-aligned.
Remove this unneeded constraint which can be annoying with big
hugepages (ex: 1GB).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
No functional change.
Clarify the populate function to make future changes easier to
understand.
Rename the variables:
- to avoid negation in the name
- to have more understandable names
Remove useless variable (no_pageshift is equivalent to pg_sz == 0).
Remove duplicate affectation of "external" variable.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now that everything that has ever accessed the shared memory
config is doing so through the public API's, we can make it
internal. Since we're removing quite a few headers from
rte_eal_memconfig.h, we need to add them back in places
where this header is used.
This bumps the ABI, so also change all build files and make
update documentation.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, in order to lock access to the mempool list, a direct
access to the shared memory structure is needed. Add an API to do
the same, and search-and-replace all usages.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Currently, locking/unlocking the TAILQ list requires direct
access to the shared memory config. Add an API to do the same,
and search-and-replace all usages.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Marchand <david.marchand@redhat.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Use eal's RTE_INIT abstraction for defining constructors.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
An API is needed to check whether a particular socket ID belongs
to an internal or external heap. Prime user of this would be
mempool allocator, because normal assumptions of IOVA
contiguousness in IOVA as VA mode do not hold in case of
externally allocated memory.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
When we allocate and use DPDK memory, we need to be able to
differentiate between DPDK hugepage segments and segments that
were made part of DPDK but are externally allocated. Add such
a property to memseg lists.
This breaks the ABI, so document the change in release notes.
This also breaks a few internal assumptions about memory
contiguousness, so adjust malloc code in a few places.
All current calls for memseg walk functions were adjusted to
ignore external segments where it made sense.
Mempools is a special case, because we may be asked to allocate
a mempool on a specific socket, and we need to ignore all page
sizes on other heaps or other sockets. Previously, this
assumption of knowing all page sizes was not a problem, but it
will be now, so we have to match socket ID with page size when
calculating minimum page size for a mempool.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
rte_mempool_calc_mem_size_helper() was introduced to avoid
code duplication and used in deprecated rte_mempool_mem_size() and
rte_mempool_op_calc_mem_size_default(). Now the first one is removed
and it is better to fold the helper into the second one to make it
more readable.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Functions rte_mempool_populate_phys(), rte_mempool_virt2phy() and
rte_mempool_populate_phys_tab() are just wrappers for corresponding
IOVA functions and were deprecated in v17.11.
Functions rte_mempool_xmem_create(), rte_mempool_xmem_size(),
rte_mempool_xmem_usage() and rte_mempool_populate_iova_tab() were
deprecated in v18.05 and removal was announced earlier in v18.02.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Currently, a mempool can be created if the number of
objects is zero. However, in this scenario,
rte_mempool_create should return NULL,
as the mempool created is useless otherwise.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Currently, populate_virt will check if mempool is already populated.
This will cause inability to reserve multi-chunk mempools if
contiguous memory is not a hard requirement, because if allocating
all-contiguous memory fails, mempool will retry with virtual addresses
and will call populate_virt. It seems that the original code never
anticipated more than one non-physically contiguous area.
Fix it by removing the check in populate virt. populate_anon() function
calls populate_virt() also, and it can be reasonably inferred that it is
expecting that virtual area is not already populated. Even though a
similar check is already in place there, also add the check that was
part of populate_virt() just in case.
Fixes: aab4f62d6c1c ("mempool: support no hugepage mode")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Remove version tag from experimental block in linker version scripts
(.map files).
That label is not used by linker and information only. It is useful
for version blocks but not useful for experimental block but confusing.
Removing those labels.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When populating a mempool with the default function, if there is not
enough virtually contiguous memory for the whole mempool, it will be
populated with several chunks. A chunk of the maximum available length
is requested with:
mz = rte_memzone_reserve_aligned(..., len=0, ..., align=x)
If align is smaller than the page size, the address and the length of
the memzone may not be a multiple of the page size. This makes
rte_mempool_populate_virt() to fail because it requires them to be
page-aligned. This patch fixes that.
The problem can be reproduced easily by allocating more than available
memory:
./build/app/testpmd -l 0,1 -- --total-num-mbufs=65536
...
Cause: Creation of mbuf pool for socket 0 failed: Invalid argument
After the patch, the error code is correct:
./build/app/testpmd -l 0,1 -- --total-num-mbufs=65536
...
Cause: Creation of mbuf pool for socket 0 failed: Cannot allocate memory
Fixes: ba0009560c30 ("mempool: support new allocation methods")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
If mempool manager supports object blocks (physically and virtual
contiguous set of objects), it is sufficient to get the first
object only and the function allows to avoid filling in of
information about each block member.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Primarily, it is intended as a way for the mempool driver to provide
additional information on how it lays up objects inside the mempool.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Mempool get/put API cares about cache itself, but sometimes it is
required to flush the cache explicitly.
The function is moved in the file since it now requires
rte_mempool_default_cache().
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The callback is not required any more since there is a new callback
to populate objects using provided memory area which provides
the same information.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Move rte_mempool_xmem_size() code to internal helper function
since it is required in two places: deprecated rte_mempool_xmem_size()
and non-deprecated rte_mempool_op_calc_mem_size_default().
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The callback was introduced to let generic code to know octeontx
mempool driver requirements to use single physically contiguous
memory chunk to store all objects and align object address to
total object size. Now these requirements are met using a new
callbacks to calculate required memory chunk size and to populate
objects using provided memory chunk.
These capability flags are not used anywhere else.
Restricting capabilities to flags is not generic and likely to
be insufficient to describe mempool driver features. If required
in the future, API which returns structured information may be
added.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The callback allows to customize how objects are stored in the
memory chunk. Default implementation of the callback which simply
puts objects one by one is available.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Size of memory chunk required to populate mempool objects depends
on how objects are stored in the memory. Different mempool drivers
may have different requirements and a new operation allows to
calculate memory size in accordance with driver requirements and
advertise requirements on minimum memory chunk size and alignment
in a generic way.
Bump ABI version since the patch breaks it.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Callback to calculate required memory area size may require mempool
driver data to be already allocated and initialized.
Signed-off-by: Artem V. Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Flag MEMPOOL_F_NO_PHYS_CONTIG is renamed as MEMPOOL_F_NO_IOVA_CONTIG
to follow IO memory contiguous terminology.
MEMPOOL_F_NO_PHYS_CONTIG is kept for backward compatibility and
deprecated.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Before, we were aggregating multiple pages into one memseg, so the
number of memsegs was small. Now, each page gets its own memseg,
so the list of memsegs is huge. To accommodate the new memseg list
size and to keep the under-the-hood workings sane, the memseg list
is now not just a single list, but multiple lists. To be precise,
each hugepage size available on the system gets one or more memseg
lists, per socket.
In order to support dynamic memory allocation, we reserve all
memory in advance (unless we're in 32-bit legacy mode, in which
case we do not preallocate memory). As in, we do an anonymous
mmap() of the entire maximum size of memory per hugepage size, per
socket (which is limited to either RTE_MAX_MEMSEG_PER_TYPE pages or
RTE_MAX_MEM_MB_PER_TYPE megabytes worth of memory, whichever is the
smaller one), split over multiple lists (which are limited to
either RTE_MAX_MEMSEG_PER_LIST memsegs or RTE_MAX_MEM_MB_PER_LIST
megabytes per list, whichever is the smaller one). There is also
a global limit of CONFIG_RTE_MAX_MEM_MB megabytes, which is mainly
used for 32-bit targets to limit amounts of preallocated memory,
but can be used to place an upper limit on total amount of VA
memory that can be allocated by DPDK application.
So, for each hugepage size, we get (by default) up to 128G worth
of memory, per socket, split into chunks of up to 32G in size.
The address space is claimed at the start, in eal_common_memory.c.
The actual page allocation code is in eal_memalloc.c (Linux-only),
and largely consists of copied EAL memory init code.
Pages in the list are also indexed by address. That is, in order
to figure out where the page belongs, one can simply look at base
address for a memseg list. Similarly, figuring out IOVA address
of a memzone is a matter of finding the right memseg list, getting
offset and dividing by page size to get the appropriate memseg.
This commit also removes rte_eal_dump_physmem_layout() call,
according to deprecation notice [1], and removes that deprecation
notice as well.
On 32-bit targets due to limited VA space, DPDK will no longer
spread memory to different sockets like before. Instead, it will
(by default) allocate all of the memory on socket where master
lcore is. To override this behavior, --socket-mem must be used.
The rest of the changes are really ripple effects from the memseg
change - heap changes, compile fixes, and rewrites to support
fbarray-backed memseg lists. Due to earlier switch to _walk()
functions, most of the changes are simple fixes, however some
of the _walk() calls were switched to memseg list walk, where
it made sense to do so.
Additionally, we are also switching locks from flock() to fcntl().
Down the line, we will be introducing single-file segments option,
and we cannot use flock() locks to lock parts of the file. Therefore,
we will use fcntl() locks for legacy mem as well, in case someone is
unfortunate enough to accidentally start legacy mem primary process
alongside an already working non-legacy mem-based primary process.
[1] http://dpdk.org/dev/patchwork/patch/34002/
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
If a user has specified that the zone should have contiguous memory,
add a memzone flag to request contiguous memory. Otherwise, account
for the fact that unless we're in IOVA_AS_VA mode, we cannot
guarantee that the pages would be physically contiguous, so we
calculate the memzone size and alignments as if we were getting
the smallest page size available.
However, for the non-IOVA contiguous case, existing mempool size
calculation function doesn't give us expected results, because it
will return memzone sizes aligned to page size (e.g. a 1MB mempool
may use an entire 1GB page), therefore in cases where we weren't
specifically asked to reserve non-contiguous memory, first try
reserving a memzone as IOVA-contiguous, and if that fails, then
try reserving with page-aligned size/alignment.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Tested-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
There is not specified dependency between rte_mempool_populate_default()
and rte_mempool_populate_iova(). So, the second should not rely on the
fact that the first adds capability flags to the mempool flags.
Fixes: 65cf769f5e6a ("mempool: detect physical contiguous objects")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Add non-EAL libraries to DPDK build. The compat lib is a special case,
along with the previously-added EAL, but all other libs can be build using
the same set of commands, where the individual meson.build files only need
to specify their dependencies, source files, header files and ABI versions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Many exported headers rely on definitions found in rte_config.h without
including it, as shown by the following command:
grep -L '^#include <rte_config.h>' -- \
$(grep -Rl \
$(sed -n '/^#define \([^ ]\+\).*$/{s//\1/;H;};${x;s/\n//;s/\n/\\|/g;p;}' \
build/include/rte_config.h) \
-- build/include/)
We cannot assume external applications will include rte_config.h on their
own, neither directly nor through a -include parameter like DPDK does
internally.
This not only causes obvious compilation failures that can be reproduced
with check-includes.sh such as:
[...]/rte_memory.h:88:43: error: ‘RTE_CACHE_LINE_SIZE’ was not declared in
this scope
#define __rte_cache_aligned __rte_aligned(RTE_CACHE_LINE_SIZE)
^
It also results in less visible issues, for instance rte_hash_crc.h relying
on RTE_ARCH_X86_64's presence to provide dedicated inline functions.
This patch partially reverts the commit below and adds missing include
lines to the remaining files.
Fixes: f1a7a5c5f404 ("remove include of generated config header")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Mempool creation needs to be completed first before notifying mempool to
register the mempool area.
Fixes: 12b8cc1a7e86 ("mempool: notify memory area to pool")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
API and ABI of mempool library has been changed in 17.11.
Fixes: 02604520b2f2 ("mempool: remove unused flags argument")
Fixes: 0cc0f8aaa35d ("mempool: change flags from int to unsigned int")
Fixes: 6eac187bff30 ("mempool: add flags arg in xmem size and usage")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
