When RTE_LIBRTE_MBUF_DEBUG enabled, rte_mbuf_sanity_check()
function defined in rte_mbuf.so library,
add it while linking the librte_pmd_ice.so library to fix
the build issue.
error log:
/usr/bin/ld: ice_rxtx.o: in function `ice_recv_pkts':
ice_rxtx.c:(.text+0x1d97): undefined reference to
`rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.o: in function
`ice_tx_queue_release_mbufs':
ice_rxtx.c:(.text+0x21e0): undefined reference to
`rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.c:(.text+0x22b3): undefined reference
to `rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.c:(.text+0x24a0): undefined reference
to `rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.c:(.text+0x2640): undefined reference
to `rte_mbuf_sanity_check'
/usr/bin/ld: ice_rxtx.o:ice_rxtx.c:(.text+0x299f):
more undefined references to `rte_mbuf_sanity_check' follow
Fixes: 50370662b727 ("net/ice: support device and queue ops")
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit includes the add of:
- ConnectX-6 device ID
- ConnectX-6 SRIOV device ID
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch adds to MLX4 PMD the option to set flow rules
with empty ether MAC and specific VLAN ID.
Note that this fix works with
1. CX-3 FW 2.42.5016 or higher.
2. mlxconfig configuration STEER_FORCE_VLAN set to 1.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch implements the set of actions to support offload
of packet header modifications to MLX5 NIC.
Implementation is based on RFC [1].
[1] http://mails.dpdk.org/archives/dev/2018-November/119971.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
rte_eth_dev_rss_hash_conf_get API doesn't force 'rss_conf.rss_key'
to be not NULL, so rss_key = NULL should be alllowed in i40e
driver.
Fixes: 16321de09396 ("ethdev: allow to get RSS hash functions and key")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Software indexes are PMD internal and should not be passed outside.
Right now SW and HW indexes of the Tx queue match, so it is just
a cosmetic fix.
Fixes: dbdc82416b72 ("net/sfc: factor out libefx-based Tx datapath")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This capability is reported when supported by the current emitting
sub-device. Failsafe PMD itself does not exercise fast free logic.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
DCR is Intel internal information, no need to be in public code.
Related commit:
1a0833efde70 ("net/i40e/base: fix comment referencing internal data")
Fixes: e5b2a9e957e7 ("net/avf/base: add base code for avf PMD")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When setting the MTU, eth_dev_mtu_set() is called to validate the
provided MTU. As part of that, it calculates the useful area to store
data and compares it against the MTU, to guarantee that there's enough
space to store the data. It calculates that as:
"tp_frame_size - TPACKET2_HDRLEN - sizeof(struct sockaddr_ll)"
However, the TPACKET2_HDRLEN macro already increments sizeof(struct
sockaddr_ll) internally, meaning the useuful area of data above will
have sizeof(struct sockaddr_ll) decremented twice.
Instead, the useful area of data should be calculated as:
"tp_frame_size - TPACKET2_HDRLEN"
This makes sure that there's enough useful area to fit the provided MTU
after excluding tpacket2_hdr and sockaddr_ll.
Fixes: cc68ac4847bc ("net/af_packet: support MTU change")
Cc: stable@dpdk.org
Signed-off-by: Tiago Lam <tiago.lam@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch improves both descriptors dequeue and refill,
by using the same batching strategy as done in in-order path.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
This patch adds support for in-order path when meargeable buffers
feature hasn't been negotiated.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Accounting of bytes was moved to a common function, so at the moment we do
it twice. This patches fixes it for sending packets with packed virtqueues.
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The common data freeing has been moved to rte_eth_dev_release_port(),
so freeing mac_addrs like this in eth_dev_close() is unnecessary and
will cause double free.
Fixes: e16adf08e54d ("ethdev: free all common data when releasing port")
Cc: stable@dpdk.org
Signed-off-by: Hideyuki Yamashita <yamashita.hideyuki@po.ntt-tx.co.jp>
Signed-off-by: Yasufumi Ogawa <ogawa.yasufumi@lab.ntt.co.jp>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The failsafe driver spews messages every time it is polling
making debugging other things more difficult. Just remove it.
Example:
net_failsafe: Hot-plug mutex was locked by thread 140182066431744 by the hot-plug alarm
net_failsafe: Hot-plug mutex was locked by thread 140182066431744 by the hot-plug alarm
...
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The checksum calculation APIs take only the packet headers pointers as
parameters, so they assume that the lengths reported in those headers
are correct. However, a malicious packet could claim to be far larger
than it is, so we need to check the header lengths in the driver before
calling the checksum API.
A better fix would be to allow the lengths to be passed into the API
function, but that would be an API break, so fixing in TAP driver for
now.
Fixes: 8ae3023387e9 ("net/tap: add Rx/Tx checksum offload support")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
When MPRQ mempool is freed, the pointer stored in priv structure must be
reset to null. Otherwise, the mempool can be freed again if the port is
restarted.
Fixes: 7d6bf6b866b8 ("net/mlx5: add Multi-Packet Rx support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch respond the VIRTCHNL_OP_REQUEST_QUEUES msg from VF, and
process to allocated more queues for the requested VF. If successful,
PF will notify VF to reset. If unsuccessful, PF will send message to
inform VF.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Before this patch, VF gets a default number of queues from the PF.
This patch enables VF to request a different number. When VF configures
more queues, it will send VIRTCHNL_OP_REQUEST_QUEUES to PF to request
more queues, if success, PF will reset the VF.
User can run "port stop all", "port config port_id rxq/txq queue_num"
and "port start all" to reconfigure queue number.
Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix following build errors reported by Intel C++ compiler in Windows
build.
C:\> t4_hw.c(5105): warning #147: declaration is incompatible with
"int t4_bar2_sge_qregs(struct adapter *, unsigned int, unsigned int,
u64={uint64_t={unsigned __int64}} *, unsigned int *)"
(declared at line 524 of "..\..\..\..\drivers\net\cxgbe\base\common.h")
int t4_bar2_sge_qregs(struct adapter *adapter, unsigned int qid,
^
C:\> cxgbe_filter.c(42): error : expected an expression
n_user_filters = mult_frac(adap->tids.nftids,
^
C:\> sge.c(400): error : expression must be a pointer to a complete
object type
(uint16_t)(RTE_PTR_ALIGN((char *)mbuf->buf_addr +
^
Build Environment:
1. Target OS: Microsoft Windows Server 2016
2. Compiler: Intel C++ Compiler from Intel Parallel Studio XE 2019 [1]
3. Development Tools:
3.1 Microsoft Visual Studio 2017 Professional
3.2 Windows Software Development Kit (SDK) v10.0.17763
3.3 Windows Driver Kit (WDK) v10.0.17763
[1] https://software.intel.com/en-us/parallel-studio-xe
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Define symbols only when they are not available.
This fixes following types of issues reported by Intel C++ compiler
in Windows build.
C:\> cxgbe_compat.h(154): warning #47: incompatible redefinition of
macro "min"
#define min(a, b) RTE_MIN(a, b)
^
C:\> t4_hw.c(338): warning #266: function "bzero" declared implicitly
bzero(p, 0, size);
^
C:\> t4_hw.c(5337): warning #266: function "htonl" declared implicitly
rvc.op_to_viid = htonl(V_FW_CMD_OP(FW_RSS_VI_CONFIG_CMD) |
^
C:\> sge.c(361): error : expected an expression
struct sge_eth_rxq *rxq = container_of(q, struct sge_eth_rxq, fl);
^
C:\> sge.c(1350): error : identifier "caddr_t" is undefined
static void inline_tx_mbuf(const struct sge_txq *q, caddr_t from,
^
[...]
Build Environment:
1. Target OS: Microsoft Windows Server 2016
2. Compiler: Intel C++ Compiler from Intel Parallel Studio XE 2019 [1]
3. Development Tools:
3.1 Microsoft Visual Studio 2017 Professional
3.2 Windows Software Development Kit (SDK) v10.0.17763
3.3 Windows Driver Kit (WDK) v10.0.17763
[1] https://software.intel.com/en-us/parallel-studio-xe
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Replace "args..." with "fmt, ..." and directly use __VA_ARGS__.
This fixes following errors reported by Intel C++ compiler in Windows
build.
C:\> cxgbe_compat.h(28): error : expected a ")"
#define dev_printf(level, fmt, args...) \
^
C:\> cxgbe_compat.h(31): error : expected a ")"
#define dev_err(x, args...) dev_printf(ERR, args)
^
[...]
Build Environment:
1. Target OS: Microsoft Windows Server 2016
2. Compiler: Intel C++ Compiler from Intel Parallel Studio XE 2019 [1]
3. Development Tools:
3.1 Microsoft Visual Studio 2017 Professional
3.2 Windows Software Development Kit (SDK) v10.0.17763
3.3 Windows Driver Kit (WDK) v10.0.17763
[1] https://software.intel.com/en-us/parallel-studio-xe
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The Intel C++ compiler is not able to locate the header files without
relative paths in Windows build. Following errors are seen for these
header files.
C:\> base\common.h(9): error : cannot open source file "cxgbe_compat.h"
#include "cxgbe_compat.h"
^
[...]
Fix by explicitly stating header file location using relative paths.
Also, remove automatically including header files for Linux, to keep
it consistent across both OS.
Build Environment:
1. Target OS: Microsoft Windows Server 2016
2. Compiler: Intel C++ Compiler from Intel Parallel Studio XE 2019 [1]
3. Development Tools:
3.1 Microsoft Visual Studio 2017 Professional
3.2 Windows Software Development Kit (SDK) v10.0.17763
3.3 Windows Driver Kit (WDK) v10.0.17763
[1] https://software.intel.com/en-us/parallel-studio-xe
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add ops link_update.
LSC interrupt is also enabled in this patch.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Normally when starting/stopping the device the queue
should be started and stopped. Support them both in
this patch.
Below ops are added,
dev_configure
dev_start
dev_stop
dev_close
dev_reset
rx_queue_start
rx_queue_stop
tx_queue_start
tx_queue_stop
rx_queue_setup
rx_queue_release
tx_queue_setup
tx_queue_release
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Add some MACRO defination and small functions which
are specific for DPDK.
Add readme too.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the structures that define how the Rx/Tx queues
are used.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add the structures and defines that define what
protocols the NIC can handle.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add various headers that define status codes and
basic defines for use in the code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add code that multiple other features use.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add code to read/write/query the NVM image.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
