This patch contains a fix for link bonding handling of vlan tagged packets in mode 3 and 5.
Currently xmit_slave_hash function misinterprets the PKT_RX_VLAN_PKT flag to mean that
there is a vlan tag within the packet when in actually means that there is a valid entry
in the vlan_tci field in the mbuf.
- Fixed VLAN tag support in hashing functions.
- Adds support for TCP in layer 4 header hashing.
- Splits transmit hashing function into separate functions for each policy to
reduce branching and to make the code clearer.
- Fixed incorrect flag set in test application packet generator.
Test report: http://dpdk.org/ml/archives/dev/2015-January/010792.html
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SunX Jiajia <sunx.jiajia@intel.com>
When vfio module is not loaded when kernel support vfio feature,
the routine still try to open the container to get file
description.
This action is not safe, and of course got error messages:
EAL: Detected 40 lcore(s)
EAL: unsupported IOMMU type!
EAL: VFIO support could not be initialized
EAL: Setting up memory...
This may make user confuse, this patch make it reasonable
and much more smooth to user.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
The read/seek/close stub functions are unnecessary on the
log stream. Per glibc fopencookie man page:
cookie_read_function_t *read
If *read is a null pointer, then reads from the custom stream
always return end of file.
cookie_seek_function_t *seek
If *seek is a null pointer, then it is not possible to perform
seek operations on the stream.
cookie_close_function_t *close
If *close is NULL, then no special action is performed when the
stream is closed.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When scanning the hugetlbfs maps search only for the DPDK maps.
This will allow the application create its own hugetlbfs mappings
and use the DPDK facilities on the same hugetlbfs mount point.
Signed-off-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
rte_is_power_of_2 returns true for 0 and 0 is not power_of_2.
Fix by checking for n.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
When building static archives with CONFIG_COMBINED_LIBS, we still need to
specify --whole-archive to pull in all the proper constructors.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Lyn M <netinal7@gmail.com>
Tested-by: Lyn M <netinal7@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Synchronize naming with changes done in documentation,
e.g. commit ac8ada0 ("doc: remove Intel references from release notes").
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Guides have been added in release 1.8.0.
They use sphinx to process rst files.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The NIC bind tool has been renamed in commit f0e14c5f66c9c137.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Added instructions for updating from DPDK 1.7.0 to 1.8.0
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Known issue regarding iommu/VT-d and igb_uio in Linux kernel version 3.15
to 3.17 where unbinding the device from the driver removes the 1:1 mapping
in the iommu resulting in IOMMU/DMAR errors when the device tries to
access memory.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed resolved issues from known issues section.
Added new resolved issues to resolved issues section.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added to New and Supported features for VXLAN feature.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added new and existing names of sample apps to list of
sample apps in release notes.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
fixed setup menu options in linux gsg to
keep in synch with setup.sh
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In Release 1.8, the mbuf structure was significantly reworked to add
extra information, leading to the structure being split across two
cache lines, and the data pointer being replaced by an offset. The
description of the library in the programmer's guide document needs
to be updated to take account of these changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch added IBM ppc_64 descriptions, including architecture
support, compiling requirements on Linux.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removing Appendix A from Release Notes as Intel Licensing information is
no longer relevant in this document.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed redundant Intel legal info from linux gsg.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed multiple references to Intel(R) DPDK where no longer
relevant.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed references to Intel which
are no longer relevant in linux gsg.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch fixes checking the link state of a virtual function. If the
state has already been checked, it does not need to be checked
again. Previously, get_link_status in the ixgbe_hw struct was used to
track if the information had already been retrieved, but this field
was always set to false (signifying that the information was
up-to-date). The problem was introduced by commit 8ef32003 which was
part of a patch set to update the ixgbe portion of the PMD. This patch
does not break consistency with the ixgbevf driver. Instead, it fixes
the problem at the level of DPDK.
Applications that rely on the reported link speed could fail without
this patch. The qos_sched example application provided with DPDK did
not run when virtual functions were used. The output for this example
application is shown below:
EAL: Error - exiting with code: 1
Cause: Unable to config sched subport 0, err=-2
The problem and the effect of the patch can been seen by running the
l2fwd example application using the following command:
sudo ./build/l2fwd -c 0x3 -n 4 -- -p 0x3 -T 0
Before the patch has been applied (with both links up):
...
Checking link statusdone
Port 0 Link Up - speed 100 Mbps - half-duplex
Port 1 Link Up - speed 100 Mbps - half-duplex
L2FWD: entering main loop on lcore 1
...
After the patch has been applied (with both links up):
...
Checking link statusdone
Port 0 Link Up - speed 10000 Mbps - full-duplex
Port 1 Link Up - speed 10000 Mbps - full-duplex
L2FWD: entering main loop on lcore 1
...
Before the patch has been applied (with link 0 down, link 1 up):
...
Checking link statusdone
Port 0 Link Up - speed 100 Mbps - half-duplex
Port 1 Link Up - speed 100 Mbps - half-duplex
L2FWD: entering main loop on lcore 1
...
After the patch has been applied (with link 0 down, link 1 up):
...
Checking link status............................................................
..............................done
Port 0 Link Down
Port 1 Link Up - speed 10000 Mbps - full-duplex
...
Signed-off-by: Balazs Nemeth <balazs.nemeth@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
EAL: probe driver: 8086:10fb rte_ixgbe_pmd
EAL: PCI memory mapped at 0x7f18c2a00000
EAL: PCI memory mapped at 0x7f18c2a80000
Segmentation fault (core dumped)
This is introduced by commit: 46bc9d75
ixgbe: fix multi-process support
When start primary process with command line:
./app/test/test -n 1 -c ffff -m 64
then start the second one:
./app/test/test -n 1 --proc-type=secondary --file-prefix=rte
This segment-fault will occur.
Root cause is test app on primary process only starts device, but
the queue need initialized by manually command line.
So the tx queue is still NULL when secondary process startup.
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch removes the interrupt registration code which was under the flag
VFIO_PRESENT and relies on the rte_lib code for the same.
This also ignores the initial trigger of ISR from the lib.
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
In rte_pmd_init_internals, we are mapping memory but not released
if error occurs it could produce memory leak.
Add unmmap function to release memory.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: John W. Linville <linville@tuxdriver.com>
In rte_eth_af_packet.c we are we are missing NULL pointer
checks after calls to allocate memory for queues.
Add checking NULL pointer and error handling.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Back in commit aaa662e75c23c61 ("cmdline: fix overflow on bsd"),
the author failed to fixup a call to cmdline_parse_etheraddr in xenvirt.
This patch makes the needed correction to avoid a build break.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This patch fixes the issue whereby when using userspace vhost ports
in the context of vSwitching, the name provided to the hypervisor/QEMU
of the vhost tap device needs to be exposed in the library, in order
for the vSwitch to be able to direct packets to the correct device.
This patch introduces an 'ifname' member to the virtio-net structure
which is populated with the tap device name when QEMU is brought up
with a vhost device.
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Anthony Fee <anthonyx.fee@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
From CentOS 6.6, function skb_set_hash is introduced, this breaks
the previous assumption. So modify RHEL_RELEASE_VERSION from 7.0
to 6.6 to fix build for rte_kni.ko.
Related mail from Barak Enat:
http://dpdk.org/ml/archives/dev/2014-December/010124.html
building error likes:
CC [M] lib/librte_eal/linuxapp/kni/e1000_82575.o
In file included from lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_osdep.h:41,
from lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_hw.h:31,
from lib/librte_eal/linuxapp/kni/ethtool/igb/e1000_api.h:31,
from lib/librte_eal/linuxapp/kni/e1000_82575.c:38:
lib/librte_eal/linuxapp/kni/ethtool/igb/kcompat.h:3870: error: conflicting types for ‘skb_set_hash’
include/linux/skbuff.h:620: note: previous definition of ‘skb_set_hash’ was here
Reported-by: Barak Enat <barak@saguna.net>
Signed-off-by: Jincheng Miao <jincheng.miao@gmail.com>
The following commit break vm2vm hard mode test cases:
commit db4014f2b65cb31bf ("use factorized default Rx/Tx configuration")
Investigation show that it needs enabling vlan offload since it is turn off
by default in some drivers, and Tx need it, especially when vm2vm is in hard mode.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Tested-by: Jingguo Fu <jingguox.fu@intel.com>
Fix a typo: cmdline_parse_token_string_t was used in place of
cmdline_parse_num_string_t.
Seen with clang-3.5.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
